Document
Table of Contents

 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
FORM 10-K
(Mark One)
x
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15 OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended: July 3, 2016
Or
¨
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15 OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from                    to
Commission File Numbers 1-1000
 
 
Sparton Corporation
(Exact name of registrant as specified in its charter)
Ohio
 
38-1054690
(State or other jurisdiction of
incorporation or organization)
 
(I.R.S. Employer
Identification No.)
425 N. Martingale Road, Suite 1000
Schaumburg, Illinois 60173
(Address of principal executive offices)
Registrant’s telephone number, including area code: (847) 762-5800
Securities registered pursuant to Section 12(b) of the Act:
Title of each class
 
Name of each exchange on which registered
Common Stock, par value $1.25 per share
 
New York Stock Exchange
Securities registered pursuant to Section 12(g) of the Act:
None
 
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports) and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
Large accelerated filer  o
  
Accelerated filer  x
  
Non-accelerated filer o
  
Smaller reporting company  o
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).    Yes  ¨    No  x
The aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold (based on the closing price on the New York Stock Exchange) as of December 24, 2015 (the last business day of the registrant’s most recently completed second fiscal quarter) was approximately $204,065,000. For purposes of this computation, affiliates of the registrant include the registrant’s executive officers and directors and their respective affiliates as of December 24, 2015.
As of August 31, 2016, there were 9,839,398 shares of common stock, $1.25 par value per share, outstanding.
 
 
Documents Incorporated by Reference
Part III incorporates information by reference to the registrant’s definitive proxy statement for its 2016 Annual Meeting of Shareholders to be filed with the Securities and Exchange Commission within 120 days after the end of the fiscal year.


Table of Contents

TABLE OF CONTENTS
ITEM 1.
ITEM 1A.
ITEM 1B.
ITEM 2.
ITEM 3.
ITEM 4.
ITEM 5.
ITEM 6.
ITEM 7.
ITEM 7A.
ITEM 8.
ITEM 9.
ITEM 9A.
ITEM 9B.
ITEM 10.
ITEM 11.
ITEM 12.
ITEM 13.
ITEM 14.
ITEM 15.

2

Table of Contents


FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K contains statements about future events and expectations that are “forward-looking statements.” We may also make forward-looking statements in our other reports filed with the SEC, in materials delivered to our shareholders and in press releases. These statements relate to future events or our future financial performance and involve known and unknown risks, uncertainties and other factors that may cause our actual results, levels of activity, performance or achievements to be materially different from any future results, levels of activity, performance or achievements expressed or implied by these forward-looking statements. Certain of these risks, uncertainties and other factors are described in Item 1A, “Risk Factors” of this report. In some cases, you can identify forward-looking statements by terminology such as “may,” “will,” “should,” “expects,” “intends,” “plans,” “anticipates,” “believes,” “estimates,” “predicts,” “potential,” or the negative use of these terms or other comparable terminology that convey the uncertainty of future events or outcomes. Although we believe these forward-looking statements are reasonable, they are based on a number of assumptions concerning future conditions, any or all of which may ultimately prove to be inaccurate. These forward-looking statements are based on management’s views and assumptions at the time originally made, and we undertake no obligation to update these statements whether as a result of new information or future events. There can be no assurance that our expectations, projections or views will materialize and you should not place undue reliance on these forward-looking statements. Any statement in this report that is not a statement of historical fact may be deemed to be a forward-looking statement and subject to the safe harbor created by the Private Securities Litigation Reform Act of 1995.

3

Table of Contents

PART I 
ITEM 1.    BUSINESS
General
Sparton Corporation and subsidiaries (the “Company” or “Sparton”) has been in continuous existence since 1900. It was last reorganized in 1919 as an Ohio corporation. The Company is a provider of design, development and manufacturing services for complex electromechanical devices, as well as sophisticated engineered products complementary to the same electromechanical value stream. The Company serves the Medical & Biotechnology, Military & Aerospace and Industrial & Commercial markets through two reportable business segments; Manufacturing & Design Services (“MDS”) and Engineered Components & Products (“ECP”). Prior to fiscal year 2015, the Company reported under three reportable business segments; Medical Device (“Medical”), Complex Systems (“CS”) and Defense & Security Systems (“DSS”). The prior periods herein reflect this change in segment reporting. See Note 16, Business Segments, of the "Notes to Consolidated Financial Statements" in this Form 10-K for a further discussion of business segments. All of the Company's facilities are certified to one or more of the ISO/AS standards, including ISO 9001, AS9100 and ISO 13485, with most having additional certifications based on the needs of the customers they serve. The majority of the Company's customers are in highly regulated industries where strict adherence to regulations such as the International Tariff and Arms Regulations ("ITAR") is necessary. The Company's products and services include offerings for Original Equipment Manufacturers (“OEM”) and Emerging Technology (“ET”) customers that utilize microprocessor-based systems which include transducers, printed circuit boards and assemblies, sensors and electromechanical components, as well as development and design engineering services relating to these product sales. Sparton also develops and manufactures sonobuoys, anti-submarine warfare (“ASW”) devices used by the United States Navy as well as by foreign governments that meet Department of State licensing requirements. Additionally, Sparton manufactures rugged flat panel display systems for military panel PC workstations, air traffic control and industrial applications, as well as high performance industrial grade computer systems and peripherals. Many of the physical and technical attributes in the production of these proprietary products are similar to those required in the production of the Company's other electrical and electromechanical products and assemblies.
On April 27, 2016, Sparton announced that its Board of Directors had authorized a process to identify parties interested in acquiring the Company. This process is ongoing and there can be no assurance that this process will result in a consummation of any transaction. The Company cannot currently determine if the process will ultimately conclude in a sale of all or some of its assets.
The Company's website address is www.sparton.com. Information contained on our website is not part of this Annual Report on Form 10-K. Our website provides public access to, among other items, the Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Quarterly Earnings Releases, News Releases, Governance Guidelines and the Code of Ethics, as well as various Board of Director committee charters. Upon request, the Company provides, free of charge, copies of its periodic and current reports (e.g., Forms 10-K, 10-Q and 8-K) and amendments to such reports that are filed with the Securities and Exchange Commission (“SEC”), as well as the Board of Director committee charters. Reports are available as soon as reasonably practicable after such reports are filed with or furnished to the SEC, either at the Company's website, through a link to the SEC's website or upon request through the Company's Shareholders Relations Department.
MDS Segment
MDS segment operations are comprised of contract design, manufacturing and aftermarket repair and refurbishment of sophisticated printed circuit card assemblies, sub-assemblies, full product assemblies and cable/wire harnesses for customers seeking to bring their intellectual property to market. Additionally, Sparton is a developer of embedded software and software quality assurance services in connection with medical devices and diagnostic equipment. Customers include OEM and ET customers serving the Medical & Biotechnology, Military & Aerospace and Industrial & Commercial markets. In engineering and manufacturing for its customers, this segment adheres to very strict military and aerospace specifications and Food and Drug Administration (“FDA”) guidelines and approvals, in addition to product and process certifications.
The segment strives to exceed customers’ expectations with high delivery and quality performance. Our market advantage is our enterprise-wide Sparton Business System, experience and knowledge of the market, breadth of services that we offer and the relationships that we have developed over the past several decades. The competition includes both foreign and domestic companies, in addition to the internal capabilities of some of our customers. Some of our competitors have substantially greater financial, manufacturing or marketing resources than we do. Sparton's MDS segment excels in providing low-volume, high-mix services to highly-regulated end markets. OEM's in our market segments are continually driving costs out of their respective businesses through outsourcing strategies, allowing opportunity for Sparton to capture additional value add opportunities.

4

Table of Contents

The engineering and manufacturing of highly complex devices is a fairly fragmented industry with no dominant player in the market. In the past, large printed circuit board contract manufacturers have sold their “box build” capabilities and have been very successful. The industry has continued to grow with more companies developing printed circuit board assembly (“PCBA”) capabilities and others entering the market via mergers and acquisitions of smaller companies. This has led to stronger competition with larger companies that have the financial resources to offer the services that the customers are requiring. Customers will assume that quality will be 100% and will drive their decisions based on services offered that best fit their total solutions needs as well as on the overall cost of the these services.
The understanding of the market needs is critical for our success. We are well positioned with our capabilities to meet our current organic growth plans. Historically, acquisitions have been an important element of the growth strategy for the MDS segment. The segment has supplemented its organic growth by identifying, acquiring and integrating acquisition opportunities that result in broader, more sophisticated product and service offerings while diversifying and expanding the Company's customer base and markets.
Sparton acquired 3 companies in the MDS segment in fiscal 2015. On July 9, 2014, the Company acquired Electronic Manufacturing Technology, LLC. (“eMT”), a contract services business manufacturing electromechanical controls and electronic assemblies, for $22.1 million. On January 20, 2015, the Company acquired Real-Time Enterprises, Inc. ("RTEmd"), a developer of embedded software to operate medical devices and diagnostic equipment, for $2.3 million. On April 14, 2015, the Company acquired Hunter Technology Corporation, (“Hunter”) an electronic contract manufacturing provider specializing in military and aerospace applications and providing engineering design, new product introduction and full-rate production manufacturing solutions working with major defense and aerospace companies, test and measurement suppliers, secure networking solution providers, medical device manufacturers and a wide variety of industrial customers, for $55.0 million.
Sparton acquired 2 companies in the MDS segment in 2014. On December 11, 2013, the Company acquired Beckwood Services, Inc. ("Beckwood”), a developer of electronic or electro-mechanical controls and electronic assemblies, for $15.3 million. On March 17, 2014, the Company acquired Aubrey Group, Inc. ("Aubrey”), a design and manufacturing company which develops new products for OEMs in the Medical and Biotechnology industries, for $5.0 million.
See Note 3, Acquisitions, of the “Notes to Consolidated Financial Statements” in this Form 10-K for additional information related to these acquisitions.
The Company does not believe that the MDS segment is substantially dependent on any individual contract or agreement with any customer and the significance of these large customers continues to be reduced through the Company's customer diversification as a result of growth. The Company's typical contractual arrangement with a customer is represented by a master agreement which includes certain master terms and conditions of Sparton's relationship with this customer. This agreement does not commit the customer to any specific volume of purchases. Moreover, these terms can be amended in appropriate circumstances. Thus, until this customer submits a purchase order to Sparton, there is no guarantee of any revenue to Sparton. The Company uses the purchase orders to determine volume and delivery requirements.
The majority of Sparton's MDS segment customers are in highly regulated industries where strict adherence to regulations such as ITAR, regulations issued by the FDA, the Federal Aviation Administration (“FAA”), the Environmental Protection Agency ("EPA") and similar foreign jurisdiction regulations such as the European Union RoHS (Restriction of Hazardous Substances) and REACH (Registration, Evaluation and Authorization of Chemicals) is necessary. Non-compliance risks range from variance notifications to production/shipping prevention depending upon the agency and form of non-compliance. These requirements are highly technical in nature and require strict adherence and documentation related to operational processes. Sparton's quality system provides us the ability to service such markets, differentiating Sparton from some potential competitors which lack such systems.
While overall sales can fluctuate during the year in each of our segments, revenues from our MDS segment are typically higher in the second half of the Company's fiscal year. Various factors can affect the distribution of our revenue between accounting periods, mainly the timing of customer demand.
ECP Segment
ECP segment operations are comprised of design, development and production of proprietary products for both domestic and foreign defense as well as commercial needs. Sparton designs and manufactures ASW devices known as sonobuoys for the U.S. Navy and for foreign governments that meet Department of State licensing requirements. This segment also performs an engineering development function for the United States military and prime defense contractors for advanced technologies, ultimately leading to future defense products, as well as replacements for existing products. The sonobuoy product line is built to stringent military specifications. These products are restricted by International Tariff and Arms Regulations (“ITAR”) and qualified by the U.S. Navy, which limits opportunities for competition. This segment is also a provider of rugged flat panel display systems for military panel PC workstations, air traffic control and industrial and commercial marine applications, as well as high performance industrial grade computer systems and peripherals. Rugged displays are manufactured for prime

5

Table of Contents

contractors, in some cases to specific military grade specifications. Additionally, this segment internally develops and markets commercial products for underwater acoustics and microelectromechanical (“MEMS”)-based inertial measurement.
Sparton is a 50/50 joint venture (“JV”) partner with UnderSea Sensor Systems, Inc. (“USSI”), the only other major producer of U.S. derivative sonobuoys. USSI's parent company is Ultra Electronics Holdings PLC, based in the United Kingdom. The JV operates under the name ERAPSCO and allows Sparton and USSI to combine their own unique and complementary backgrounds to jointly develop and produce U.S. derivative sonobuoy designs for the U.S. Navy as well as for foreign governments that meet Department of State licensing requirements. ERAPSCO maintains the DBA Sonobuoy TechSystems through which it conducts business directly with foreign governments. In concept, and in practice, ERAPSCO serves as a pass-through entity maintaining no funds or assets. While the JV provides the opportunity to maximize efficiencies in the design and development of the related sonobuoys, both of the joint venture partners function independently as subcontractors; therefore, there is no separate entity to be accounted for or consolidated. The Board of Directors of ERAPSCO has the responsibility for the overall management and operation of the JV. The six member board consists of equal representation (full time employees) from both JV partners for three year terms. Personnel necessary for the operation of ERAPSCO, specifically a president, vice president, general manager, contract administrator and financial manager, are similarly assigned by the JV partners for rotating three year terms and the costs of these assigned individuals are borne by the party assigning the personnel. In response to a customer request for proposal (“RFP”) that ERAPSCO will bid on, the Board of Directors of ERAPSCO approves both the composition of a response to the RFP and the composite bid to be submitted to the customer. The Board of Directors strives to divide the aggregate contract awards at a 50/50 share ratio. Each JV partner bears the costs it incurs associated with the preparation and submission of proposals. Each JV partner submits to ERAPSCO a proposal for the estimated price of performing that portion of the RFP applicable to it. Upon award of a contract to the JV, separate subcontracts are generated between ERAPSCO and each of the JV partners defining the responsibilities and compensation. These subcontracts contain terms and conditions consistent with the prime contract. Each JV partner is responsible to ERAPSCO for the successful execution of its respective scope of work under its subcontract and each JV partner is individually accountable for the profit or losses sustained in the execution of the subcontract against its respective bid. In some instances, either Sparton or USSI handles the complete production and delivery of sonobuoys to ERAPSCO's customer. In other instances, either Sparton or USSI starts the production and ship completed subassemblies to the other party for additional processing before being delivered to the customers. Under ERAPSCO, individual contract risk exposures are reduced, while the likelihood of achieving U.S. Navy and other ASW objectives is enhanced. ERAPSCO has been in existence since 1987 and historically, the agreed upon products included under the JV were generally developmental sonobuoys. In 2007, the JV expanded to include all future sonobuoy development and substantially all U.S. derivative sonobuoy products for customers outside of the United States. The JV was further expanded three years later to include all sonobuoy products for the U.S. Navy beginning with U.S. Navy's 2010 fiscal year contracts.
While the ERAPSCO agreement provides certain benefits to Sparton as described above, the Company does not believe that it is substantially dependent upon this agreement to conduct its business. If in the future, Sparton determines that this commercial arrangement is no longer beneficial, the Company has the ability to terminate the joint venture in relation to future business awards and return to independent bidding for U.S. Navy and foreign government ASW awards.
New internally funded products are under development for sale as commercial products to the navigation, heading and positioning systems applications markets. Markets for these products include autonomous underwater and ground vehicles, as well as unattended aerial vehicles as our product offerings grow. The principal example of such products is a family of precision inertial sensors for applications such as navigation or undersea petroleum exploration. Competition among companies that build these products is intense and dynamic. As such, development of our commercial products requires the identification of sustainable competitive advantages (“SCA”) prior to investment to ensure there is a viable market for our products. Each new product must advance the technology available to the market enough to overcome the inherent inertia preventing potential customers from switching from competitor's products. Likewise, existing products are evaluated periodically to ensure their SCA is still maintained and if not, either redesign or end-of-life occurs. The expansion of our commercial product lines leverages the intrinsic engineering talent at Sparton and capitalizes on the sonobuoy product volumes to provide technological as well as economies of scale advantages. Pursuit of commercial markets and all sales and profits from this endeavor are not a part of the ERAPSCO JV.
During fiscal years 2016, 2015 and 2014, Sparton incurred internally funded research and development (“IR&D”) expenses of $2.3 million, $1.5 million and $1.2 million, respectively, for the internal development of technologies. Customer funded R&D costs, which are usually part of a larger production agreement, totaled $16.7 million, $9.9 million and $9.7 million for fiscal years 2016, 2015 and 2014, respectively.
Sonobuoy and related engineering services, including sales to the U.S. Navy and foreign governments, accounted for 28%, 29% and 28% of consolidated revenue for fiscal years 2016, 2015 and 2014, respectively. Sales to the U.S Navy accounted for 22%, 25% and 19% of consolidated revenue for fiscal years 2016, 2015 and 2014, respectively. The U.S. Navy issues multiple contracts annually for its sonobuoy and engineering requirements. The loss of U.S. Navy sonobuoy sales would

6

Table of Contents

have a material adverse financial effect on the Company. While the overall relationship with the U.S. Navy is important to Sparton, the Company does not believe that it is substantially dependent on any individual contract or agreement with the U.S. Navy, other than the Subcontract (the "Subcontract"), effective December 4, 2014, between Sparton DeLeon Springs, LLC and ERAPSCO and the Subcontract effective November 4, 2015 between Sparton DeLeon Springs, LLC and ERAPSCO (collectively, the “Material Subcontracts”). Each of the Material Subcontracts is filed as an exhibit to this Annual Report on Form 10-K, and each has been issued pursuant to a U.S. Navy one year Indefinite Delivery Indefinite Quantity contract with four option years (the “IDIQ Contract”). The IDIQ Contract is also considered a material contract to the Company and is filed as an exhibit to this Annual Report on Form 10-K. Pursuant to the currently effective subcontracts issued pursuant IDIQ, including the Material Subcontracts, Sparton will supply sonobuoys to the U.S. Navy through ERAPSCO based on total subcontract awards received by Sparton DeLeon Springs, LLC in fiscal 2016 of approximately $91.7 million.
United States Navy contracts allow Sparton to submit performance based billings, which are then applied against inventories purchased and manufacturing costs incurred by the Company throughout its performance under these contracts. Inventories were reduced by performance based payments from the U.S. Navy for costs incurred related to long-term contracts, thereby establishing inventory to which the U.S. Navy then has title, of $9.0 million and $7.5 million, respectively, at July 3, 2016 and June 30, 2015. At July 3, 2016 and June 30, 2015, current liabilities include performance based payments of $0.0 million and $1.8 million, respectively, on Navy contracts. As these payments are in excess of cost, there is no inventory to which the government would claim title and, therefore, no offset to inventory has been made.
Acquisitions have been an element of the growth strategy for the ECP segment. The Segment has supplemented its organic growth by identifying, acquiring and integrating tangential technology products-based acquisition opportunities.
During fiscal year 2015, the Company acquired substantially all of the assets of Stealth.com ("Stealth"), a supplier of high performance rugged industrial grade computer systems and peripherals, for $16.0 CAD ($12.6 USD) million; certain assets of KEP Marine, a designer and manufacturer of industrial displays, industrial computers and HMI software for the Marine market, for $4.3 million; certain assets of Argotec, Inc. ("Argotec"), a business engaged in developing and manufacturing of sonar transducer products and components for the U.S. Navy, for $0.4 million and certain assets of Industrial Electronic Devices, Inc. ("IED"), a designer and manufacturer of rugged displays for the Industrial and Marine markets, for $3.3 million. During fiscal year 2014, the Company acquired certain assets and liabilities of Aydin Displays, Inc. ("Aydin Displays" or “Aydin”), which develops enhanced flat panel display and touch-screen solutions for the Military & Aerospace and Civil Marine markets, for $15.5 million.
See Note 3, Acquisitions, of the “Notes to Consolidated Financial Statements” in this Form 10-K for additional information related to these acquisitions.
ECP business operations are affected by numerous laws and regulations relating to the award, administration and performance of U.S. Navy contracts. The U.S. Navy generally has the ability to terminate ECP contracts, in whole or in part, without prior notice, for convenience or for default based on performance. If any of these contracts were terminated for convenience, Sparton would generally be protected by provisions covering reimbursement for costs incurred on the contracts and profit on those costs, but not the anticipated profit that would have been earned had the contract been completed.
Non-sonobuoy related manufacturing and services are sold primarily through a direct sales force. In addition, our divisional and executive management teams are an integral part of our sales and marketing teams.
Other
Materials for our operations are generally available from a variety of worldwide sources, except for selected components. Access to competitively priced materials is critical to success in our businesses. In certain markets, the volume purchasing power of our larger competitors creates a cost advantage for them. The Company has encountered availability and extended lead time issues on some electronic components due to strong market demand. This condition resulted in higher prices and late deliveries. However, the Company does not expect to encounter significant long-term problems in obtaining sufficient raw materials. The risk of material obsolescence in our businesses is less significant than that which exists in many other markets since raw materials and component parts are generally purchased only upon receipt of a customer's order. However, excess material resulting from order lead-time is a risk factor due to potential order cancellation or design changes by customers.
Substantially all of the Company's revenue is from customers based in the United States. Additionally, the Company has internal customers and manufacturing facilities in Canada and Vietnam. See Note 17, Business, Geographic and Sales Concentration, of the "Notes to Consolidated Financial Statements" in this Form 10-K for financial information regarding the Company's geographic sales concentration and locations of long-lived assets.
At July 3, 2016, Sparton employed 1,853 people, including 156 contractors. None of the Company's employees are represented by a labor union. The Company considers employee relations to be good.

7

Table of Contents

Executive Officers of the Registrant
Information with respect to executive officers of the Registrant is set forth below. The positions have been held for the periods noted.
Joseph J. Hartnett
  
Interim President and Chief Executive Officer of Sparton Corporation since February 2016. Previously, Mr. Hartnett served as the Chairman of the Board of Directors of the Company. Prior to that, Mr. Hartnett served as President, Chief Executive Officer and Chief Operating Officer of Ingenient Technologies, Inc. a multimedia software development company, from 2008 through 2010. Before that date, Mr. Hartnett held the positions of Chairman of the Board, President and Chief Executive Officer and Chief Financial Officer with U.S. Robotics Corporation. (Age 60)

 
 
 
Joseph G. McCormack
 
Senior Vice President and Chief Financial Officer since September 2015. Previously, Mr. McCormack served as Senior Financial Consultant to the Company since June 2015. Prior to that Mr. McCormack was a senior financial consultant from May 2012 to June 2015 and was Chief Financial Officer of Ingenient Technologies from December 2005 to May 2012. (Age 53)

 
 
 
Gordon B. Madlock
  
Senior Vice President, Operations since January 2009. Previously, Mr. Madlock held the position of Senior Vice President of Operations for Citation Corporation in Novi, MI since September 1999. (Age 58)
 
 
 
Steven M. Korwin
  
Senior Vice President, Quality and Engineering since September 2009. Previously, Mr. Korwin held the position of Group Vice President, Electronic Manufacturing Services since December 2008. Prior to that date, Mr. Korwin held the position of Vice President of Quality and Engineering for Citation Corporation in Novi, MI since October 2005. (Age 53)
 
 
 
Joseph Schneider
 
Senior Vice-President, Sales and Marketing, since May 2015.  Previously, Mr. Schneider held the position of Vice President for Siemens Healthcare Diagnostics in the In Vitro Diagnostics segment since 2012.  Prior to that, Mr. Schneider led sales and marketing efforts for newly acquired Siemens Industry, Inc. industrial businesses since 2010. (Age 49)
 
 
 
Michael A. Gaul
  
Group Vice President, Medical Manufacturing and Design Services since January 2014. Prior to that, Mr. Gaul held the position of General Manager of the Strongsville, Ohio medical manufacturing facility since September, 2011. Prior to that, Mr. Gaul held the positions of Vice President, Operations and COO at SynCardia Systems since April 2005. Prior to that, Mr. Gaul held the position of Vice President of Manufacturing Operations for Ventana Medical since May 2003. His industry experience includes Medical Devices and Reagents, Complex Capital Automation Equipment, Public Safety Communication Systems and Industrial Controls and Instrumentation. (Age 62)

 
 
 
James M. Lackemacher
  
Group Vice President, Engineered Components and Products since January 2014. Previously, Mr. Lackemacher held the position of Vice President/General Manager, Defense and Security Systems Business Unit since April 2005. (Age 54)
 
 
 
James D. Shaddix II
  
Group Vice President, Military & Aerospace Manufacturing Services since January 2014. Prior to that, Mr. Shaddix held the position of General Manager of the Frederick, Colorado medical manufacturing facility since August 2011. Prior to that, Mr. Shaddix held various positions including General Manager for Citation Corporation since July 1999. (Age 52)
 
 
 
Christopher A. Ratliff
 
Vice President, Information Technology since March 2014. Previously, Mr. Ratliff held the position of Information Technologies Director for Tootsie Roll Industries in Chicago, IL since May 2003. (Age 51)
There are no family relationships among the persons named above. All officers are elected annually and serve at the discretion of the Board of Directors.

8

Table of Contents


ITEM 1A.    RISK FACTORS
We operate in a changing economic, political and technological environment that presents numerous risks, many of which are driven by factors that we cannot control or predict. The following discussion, as well as our “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Critical Accounting Policies and Estimates” in Item 7, highlight some of these risks. The terms “Sparton,” “the Company,” “we,” “us,” and “our” refer to Sparton Corporation and subsidiaries.
The industry is extremely competitive and we depend on continued outsourcing by OEMs.
The Military and Aerospace and Medical and Biotechnology industries are highly fragmented and intensely competitive. Our contract manufacturing services are available from many sources and we compete with numerous domestic and foreign firms. Within the Company’s target market, the high-mix, low to medium volume sector of the MDS segment, there are substantially fewer competitors, but competition remains strong. Some competitors have substantially greater manufacturing, R&D, marketing or financial resources and, in some cases, have more geographically diversified international operations. The Company expects competition to intensify further as more companies enter our target markets and our customers consolidate. In the future, increased competition from large electronic component manufacturers that are selling, or may begin to sell, electronics manufacturing services may occur. Future growth will depend on our ability to win business from competitors, new outsourcing opportunities and could be limited by OEMs performing such functions internally or delaying their decision to outsource.
In some cases, the Company may not be able to offer prices as low as some competitors for a host of reasons. For example, those competitors may have lower cost structures for their services, they may be willing to accept business at lower margins in order to utilize more of their excess capacity, or they may be willing to take on business at low or even zero gross margins to gain entry into the Company’s markets. Upon the occurrence of any of these events, our net sales would likely decline. Periodically, we may be operating at a cost disadvantage compared to some competitors with greater direct buying power. As a result, competitors may have a competitive advantage and obtain business from our customers.
Principal competitive factors in our targeted markets are believed to be quality, reliability, the ability to meet delivery schedules, customer service, technological sophistication, geographic location and price. During periods of recession in the Military and Aerospace and Medical and Biotechnology industries, our competitive advantages in the areas of adaptive manufacturing and responsive customer service may be of reduced importance due to increased price sensitivity. We also expect our competitors to continue to improve the performance of their current products or services, to reduce their current products or service sales prices and to introduce new products or services that may offer greater performance and improved pricing. Any of these could cause a decline in sales, loss of market acceptance of our products or services, profit margin compression or loss of market share.
Our operating results are subject to general economic conditions and may vary significantly from period to period due to a number of factors.
We are subject to inflation, interest rate changes, availability of capital markets, consumer spending rates, the effects of governmental plans to manage economic conditions and other national and global economic occurrences beyond our control. Such factors, economic weakness and constrained customer spending have resulted in the past and may result in the future, in decreased revenue, gross margin, earnings or growth rates.
We can experience significant fluctuations in our annual and quarterly results of operations. In addition to general economic conditions, other factors that contribute to these fluctuations are our effectiveness in managing manufacturing processes and costs, as well as the level of capacity utilization of our manufacturing facilities and associated fixed costs, in order to maintain or increase profitability. We rely on our customers’ demands, which can change dramatically, sometimes with little notice. Such factors also could affect our results of operations in the future.
Customer cancellations, reductions or delays could adversely affect our operating results.
We generally do not obtain long-term purchase commitments from our customers. Customers may cancel orders, delay the delivery of orders or release orders for fewer products than we previously anticipated for a variety of reasons, including decreases in demand for their products and services. Such changes by a significant customer, by a group of customers, or by a single customer whose production is material to an individual facility could seriously harm results of operations in that period. In addition, since much of our costs and operating expenses are relatively fixed, a reduction in customer demand would adversely affect our margins and operating income. Although we are always seeking new opportunities, we cannot be assured that we will be able to replace deferred, reduced or cancelled orders.

9

Table of Contents

Our inability to forecast the level of customer orders with much certainty makes it difficult to schedule production and maximize utilization of manufacturing capacity. Additionally, we are often required to place materials orders from vendors, some of which are non-cancelable, based on an expected level of customer volume. If actual demand is higher than anticipated, we may be required to increase staffing and other expenses in order to meet such demand of our customers. Alternatively, anticipated orders from our customers may be delayed or fail to materialize, thereby adversely affecting our results of operations. Such customer order fluctuations and deferrals have had a material adverse effect on us in the past and we may experience similar effects in the future.
Such order changes could cause a delay in the repayment to us for inventory expenditures we incurred in preparation for the customer’s orders or, in certain circumstances, require us to return the inventory to our suppliers, resell the inventory to another customer or continue to hold the inventory. In some cases, excess material resulting from longer order lead time is a risk due to the potential of order cancellation or design changes by customers. Additionally, dramatic changes in circumstances for a customer could also negatively impact the carrying value of our inventory for that customer.
We are dependent on a few large customers; the loss of such customers or reduction in their demand could substantially harm our business and operating results.
For fiscal year 2016, our ten largest customers, including the U.S. Navy, accounted for 55% of total net sales. The U.S. Navy, an ECP customer through the Company’s ERAPSCO agreement, represented 22% of our total net sales. We expect to continue to depend upon a relatively small number of customers, but we cannot ensure that present or future large customers will not terminate, significantly change, reduce or delay their manufacturing arrangements with us. Because our major customers represent such a large part of our business, the loss of any of our major customers or reduced sales to these customers could negatively impact our business.
The U.S. Navy generally has the ability to terminate its contracts within the ECP segment, in whole or in part, without prior notice, for convenience or for default based on performance. If any of these U.S. Navy contracts were to be terminated, the Company would generally be protected by provisions covering reimbursement for costs incurred on the contracts and profit on those costs, but not the anticipated profit that would have been earned had the contract been completed.
We are partner to a 50/50 joint venture agreement with USSI, the only other major producer of U.S. derivative sonobuoys. If USSI were to terminate this joint venture, the Company would be required to return to independent bidding and production for the U.S. Navy and other foreign governments that meet Department of State licensing requirements for sonobuoy business. If this were to happen, it is possible that the Company’s future results could be negatively impacted. Starting with the 2014 U.S. government fiscal year, the U.S. Navy competitively bid sonobuoy contracts, potentially allowing additional competitors to vie for this business. The Company is aware that the U.S. Navy has funded a competitor for the qualification of one future sonobuoy variant that is currently not in production. While the Company believes that there are significant barriers to entry into the sonobuoy market, if a new competitor was able to successfully develop the necessary technical capabilities and gain entry into the market space, the Company’s future results could be negatively impacted.
We rely on the continued growth and financial stability of our customers. Adverse changes in the end markets they serve can reduce demand from our customers in those markets and/or make customers in these end markets more price sensitive. Furthermore, mergers or restructurings among our customers or our customers’ customers could increase concentration or reduce total demand as the combined entities rationalize their business and consolidate their suppliers. Future developments, particularly in those end markets which account for more significant portions of our revenues, could harm our business and our results of operations. If one or more of our customers experiences financial difficulty and is unable to pay for the services provided, our operating results and financial condition could be adversely affected. If our customers seek bankruptcy protection, they could act to terminate all or a portion of their business with us, originate new business with our competitors and terminate or assign our long-term supply agreements. Any loss of revenue from our major customers, including the non-payment or late payment of our invoices, could materially adversely affect our business, results of operations and financial condition.
Congressional budgetary constraints or reallocations can reduce our government sales.
Our U.S. government contracts have many inherent risks that could adversely impact our financial results. Future governmental sales could be affected by a change in defense spending by the U.S. government, or by changes in spending allocation that could result in one or more of our programs being reduced, delayed or terminated, which could adversely affect our financial results. The Company’s U.S. governmental sales are funded by the federal budget. Changes in negotiations for program funding levels or unforeseen world events can interrupt the funding for a program or contract.
U.S. government audits and investigations could adversely affect our business.

10

Table of Contents

Federal government agencies, including the Defense Contract Audit Agency and the Defense Contract Management Agency, routinely audit and evaluate government contracts and government contractors’ administrative processes and systems. These agencies review the Company’s performance on contracts, pricing practices, cost structure, financial capability and compliance with applicable laws, regulations and standards. They also review the adequacy of the Company’s internal control systems and policies, including the Company’s purchasing, accounting, estimating, compensation and management information processes and systems. Any costs found to be improperly allocated to a specific contract will not be reimbursed, while such costs already reimbursed must be refunded. If an audit or investigation of our business were to uncover improper or illegal activities, then we could be subject to civil and criminal penalties and administrative sanctions, including termination of contracts, forfeiture of profits, suspension of payments, fines and suspension or prohibition from doing business with the U.S. government. In addition, responding to governmental audits or investigations may involve significant expenses and divert management attention. If any of the forgoing were to occur, our financial condition and operating results could be materially and adversely affected.
Our current use of performance based billings within U.S. government contracts may not continue.
Our current contracts with the U.S. Navy include provisions for certain billing and collection of funds from the U.S. government in advance of related inventory purchases and incurrence of manufacturing expenses. These contractual provisions are an integral part of our capital and liquidity profile. While we have other sources of liquidity including, but not limited to, our operations, existing cash balances and our revolving line-of-credit and we believe we have sufficient liquidity for our anticipated needs over the next 12 months, no assurances regarding liquidity can be made. The discontinuance of performance based billing provisions from future U.S. Navy contracts would require us to fund the working capital requirements related to these contracts from other sources and otherwise could materially adversely impact our business, results of operations and financial condition.
The Company’s Board of Directors is exploring a potential sale of the Company, but there can be no assurances that any transaction will occur, or if such a transaction does occur, the value of that transaction to the Company or its shareholders.
The Company’s Board of Directors has authorized the exploration of a potential sale of the Company and is conducting a process to identify parties interested in acquiring the Company. This process is ongoing and there can be no assurance that this process will result in a consummation of any transaction, and if such a transaction occurs, there can be no assurances regarding the value of any transaction to the Company or its shareholders.
The Company and its customers may be unable to keep current with technological changes.
Our customers participate in markets that have rapidly changing technology, evolving industry standards, frequent new product introductions and relatively short product life cycles. The introduction of products embodying new technologies or the emergence of new industry standards can render existing products obsolete or unmarketable. Our success depends upon our customers’ ability to enhance existing products and to develop and introduce new products, on a timely and cost-effective basis, that keep pace with technological developments and emerging standards and to address increasingly sophisticated customer requirements. There is no assurance that our customers will do so and any failure to do so could substantially harm our customers and us.
Additionally, our future success will depend upon our ability to maintain and enhance our own technological capabilities, develop and market manufacturing services and products which meet changing customer needs and to successfully anticipate or respond to technological changes in manufacturing processes on a cost-effective and timely basis. If we are unable to do so, business, financial condition and operating results could be materially adversely affected.
Start-up costs and inefficiencies related to new or transferred programs can adversely affect our operating results and may not be recoverable.
Start-up costs, the management of labor and equipment resources in connection with new programs and new customer relationships, and the need to estimate the extent and timing of required resources can adversely affect our profit margins and operating results. These factors are particularly evident with the introduction of new products and programs. The effects of these start-up costs and inefficiencies can also occur when new facilities are opened or programs are transferred from one facility to another.
If new programs or customer relationships are terminated or delayed, our operating results may be harmed, particularly in the near term. We may not be able to recoup our start-up costs or quickly replace these anticipated new program revenues.
We depend on limited or single source suppliers for some critical components; the inability to obtain components as required, with favorable purchase terms, could harm our business.

11

Table of Contents

A significant portion of our costs are related to electronic components purchased to produce our products. In some cases our customers dictate that we purchase particular components from a single or limited number of suppliers. Supply shortages for a particular component can delay production and thus delay shipments to customers and the associated revenue of all products using that component. This could cause the Company to experience a reduction in sales, increased inventory levels and costs and could adversely affect relationships with existing and prospective customers. In the past, we have secured sufficient allocations of constrained components so that revenue was not materially impacted. The Company believes that alternative suppliers are available to provide the components, including unique components, necessary to manufacture our customers’ products. If, however, we are unable to procure necessary components under favorable purchase terms, including at favorable prices and with the order lead times needed for the efficient and profitable operation of our factories, our results of operations could suffer.
The Dodd-Frank Wall Street Reform and Consumer Protection Act (the “Dodd-Frank Act”) contains provisions to improve the transparency and accountability concerning the supply of minerals originating from the conflict zones of the Democratic Republic of Congo (“DRC”) and adjoining countries. As a result, the SEC established new annual disclosure and reporting requirements for those companies who use “conflict” minerals mined from the DRC and adjoining countries in their products. These requirements could affect the sourcing and availability of minerals used in the manufacturing of our electrical components. As a result, we may not be able to obtain products at competitive prices. We have had additional costs associated with complying with the new due diligence procedures as required by the SEC. Also, since our supply chain is complex, we may face reputational challenges with our customers and other stakeholders if we are unable to sufficiently verify the origins for all conflict minerals used in our products through the due diligence procedures as we implement them. We may also encounter challenges to satisfy those customers who require that all of the components of our products are certified as conflict free. If we are not able to meet customer requirements, customers may choose to disqualify us as a supplier.
A tightened credit market, either nationally or globally, may adversely affect the availability of funds to us for working capital, liquidity requirements and other purposes, which may adversely affect our cash flows and financial condition.
We have a revolving line-of-credit facility with a group of banks which is secured by substantially all the assets of the Company. We anticipate that our credit facility will be a component of our available working capital during fiscal year 2017. However, there are no assurances that the line-of-credit will be sufficient for all purposes. Additionally, if vendors of electronic components restrict or reduce credit to us for the purchase of raw materials as a result of general market conditions, the vendor’s credit status, or our financial position, it could adversely affect liquidity, cash flows and results of operations. See “Liquidity and Capital Resources” in the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” of this Form 10-K for more information related to the Company’s credit facility.
Our stock price may be volatile, and the stock is thinly traded, which may cause investors to lose most or part of their investment in our common stock.
The stock market may experience volatility that is often unrelated to the operating performance of any particular company or companies. If market-sector or industry-based fluctuations occur, our stock price could decline regardless of our actual operating performance and investors could lose a substantial part of their investments. Moreover, if an active public market for our common stock is not sustained in the future, it may be difficult to resell such stock. Generally, our stock is thinly traded. When trading volumes are low, a relatively small buy or sell order can result in a relatively large change in the trading price of our common stock and investors may not be able to sell their securities at a favorable price.
Failure to attract and retain key personnel and skilled associates could hurt operations.
Our success depends to a large extent upon the continued services of key management personnel. While we have employment contracts in place with several of our executive officers, we nevertheless cannot be assured that we will retain our key employees and the loss of service of any of these officers or key management personnel could have a material adverse effect on our business growth and operating results.
Our future success will require an ability to attract and retain qualified employees. Competition for such key personnel is intense and we cannot be assured that we will be successful in attracting and retaining such personnel. We cannot make assurances that we will not have departures of key personnel in the future. Changes in the cost of providing pension and other employee benefits, including changes in health care costs, investment returns on plan assets and discount rates used to calculate pension and related liabilities, could lead to increased costs in any of our operations.
Certain of our U.S. government contracts require our employees to maintain various levels of security clearances and we are required to maintain certain facility security clearances complying with U.S. government requirements. If our employees are unable to obtain security clearances in a timely manner, or at all, or if our employees who hold security clearances are unable to maintain the clearances or terminate employment with us, then a customer requiring classified work could terminate

12

Table of Contents

the contract or decide not to renew it upon its expiration. In addition, we expect that many of the contracts on which we will bid will require us to demonstrate our ability to obtain facility security clearances and employ personnel with specified types of security clearances.
To the extent we are not able to obtain facility security clearances or engage employees with the required security clearances for a particular contract, we may not be able to bid on or win new contracts, or effectively bid on expiring contracts.
Adverse regulatory developments could harm our business.
Our business operates and certain of our customers’ businesses operate, in heavily regulated environments. We must manage the risk of changes in or adverse actions under applicable law or in our regulatory authorizations, licenses and permits, governmental security clearances, government procurement regulations or other legal rights in order to operate our business, manage our work force or import and export goods and services as needed. We also face the risk of other adverse regulatory actions, compliance costs or governmental sanctions. The regulations and regulatory bodies include, but are not limited to, the following: the Federal Acquisition Regulations, the Truth in Negotiations Act, the False Claims Act and the False Statements Act, the Foreign Corrupt Practices Act, the Food and Drug Administration, the Federal Aviation Administration and the International Traffic in Arms Regulations.
Our failure to comply with applicable regulations, rules and approvals or misconduct by any of our employees could result in the imposition of fines and penalties, the loss of security clearances, the loss of our government contracts or our suspension or debarment from contracting with the U.S. government in general, any of which would harm our business, financial condition and results of operations. See also additional risk factors relating to U.S. government contract audits, securities laws regulations, environmental law regulations and foreign law regulations.
We are subject to a variety of environmental laws, which expose us to potential liability.
Our operations are regulated under a number of federal, state, provincial, local and foreign environmental laws and regulations, which govern, among other things, the discharge of hazardous materials into the air and water, as well as the handling, storage and disposal of such materials. These laws and regulations include the Clean Air Act, the Clean Water Act, the Resource, Conservation and Recovery Act and the Comprehensive Environmental Response, Compensation and Liability Act, as well as analogous state and foreign laws. Compliance with these environmental laws is a significant consideration for us because we use various hazardous materials in our manufacturing processes. We may be liable under environmental laws for the cost of cleaning up properties we own or operate if they are or become contaminated by the release of hazardous materials, regardless of whether we caused the release, even if we fully comply with applicable environmental laws. In the event of contamination or violation of environmental laws, we could be held liable for damages including fines, penalties and the costs of remedial actions and could also be subject to revocation of our discharge permits. Any such penalties or revocations could require us to cease or limit production at one or more of our facilities, thereby harming our business. In addition, such regulations could restrict our ability to expand our facilities or could require us to acquire costly equipment, or to incur other significant expenses to comply with environmental regulations, including expenses associated with the recall of any non-compliant product.
The Company has been involved with ongoing environmental remediation since the early 1980’s related to one of its former manufacturing facilities, located in Albuquerque, New Mexico (“Coors Road”). Uncertainties associated with environmental remediation contingencies are pervasive and often result in wide ranges of reasonably possible outcomes. Estimates developed in the early stages of remediation can vary significantly. Normally a finite estimate of cost does not become fixed and determinable at a specific point in time. Rather, the costs associated with environmental remediation become estimable over a continuum of events and activities that help to frame and define a liability. Factors which cause uncertainties for the Company include, but are not limited to, the effectiveness of the current work plans in achieving targeted results and proposals of regulatory agencies for desired methods and outcomes. It is possible that cash flows and results of operations could be materially affected by the impact of changes associated with the ultimate resolution of this contingency. At July 3, 2016, the Company estimates that it is reasonably possible, but not probable, that future environmental remediation costs associated with the Company’s past operations at the Coors Road property, in excess of amounts already recorded, could be up to $2.7 million before income taxes over the next fourteen years, with this amount expected to be offset by related reimbursement from the United States Department of Energy for a net amount of $1.0 million.
The Company and its subsidiaries are also involved in certain other existing compliance issues with the EPA and various state agencies, including being named as a potentially responsible party at several sites. Potentially responsible parties ("PRPs") can be held jointly and severally liable for the clean-up costs at any specific site. The Company’s past experience, however, has indicated that when it has contributed relatively small amounts of materials or waste to a specific site relative to other PRPs, its ultimate share of any clean-up costs has been minor. Based upon available information, the Company believes it has

13

Table of Contents

contributed only small amounts to those sites in which it is currently viewed as a PRP and that reasonably possible losses related to these compliance issues are immaterial.
The occurrence of litigation in which we could be named as a defendant is unpredictable.
Our business activities expose us to risks of litigation with respect to our customers, suppliers, creditors, shareholders, product liability, intellectual property infringement or environmental-related matters. We may incur significant expense to defend or otherwise address current or future claims. Any litigation, even a claim without merit, could result in substantial costs and diversion of resources and could have a material adverse effect on our business and results of operations. Although we maintain insurance policies, we cannot make assurances that this insurance will be adequate to protect us from all material judgments and expenses related to potential future claims or that these levels of insurance will be available in the future at economical prices or at all.
If we are not able to protect our intellectual property and other proprietary rights, we may be adversely affected.
Our success can be impacted by our ability to protect our intellectual property and other proprietary rights. We rely primarily on patents, trademarks, copyrights, trade secrets and unfair competition laws, as well as license agreements and other contractual provisions, to protect our intellectual property and other proprietary rights. However, a significant portion of our technology is not patented and we may be unable or may not seek to obtain patent protection for this technology. Moreover, existing U.S. legal standards relating to the validity, enforceability and scope of protection of intellectual property rights offer only limited protection, may not provide us with any competitive advantages and may be challenged by third parties. The laws of countries other than the United States may be even less protective of intellectual property rights. Accordingly, despite our efforts, we may be unable to prevent third parties from infringing upon or misappropriating our intellectual property or otherwise gaining access to our technology. If we fail to protect our intellectual property and other proprietary rights, then our business, results of operations or financial condition could be negatively impacted.
Business disruptions could seriously harm our business and results of operations.
Increased international political instability, evidenced by threats and occurrence of terrorist attacks, conflicts in the Middle East and Asia and strained international relations arising from these conflicts, may hinder our ability to do business. The political environment in communist countries can contribute to the threat of instability. While we have not been adversely affected as yet due to this exposure, one of our facilities is based in Vietnam, which is a communist country. These events have had and may continue to have an adverse impact on the U.S. and world economies, particularly customer confidence and spending, which in turn could affect our revenue and results of operations. The impact of these events on the volatility of the U.S. and world financial markets could increase the volatility of our securities and may limit the capital resources available to us, our customers and our suppliers.
Our operations could be subject to natural disasters, disease and other business disruptions, including earthquakes, power shortages, telecommunications failures, water shortages, tsunamis, floods, hurricanes, fires, pandemic outbreaks and other natural or manmade disasters, which could seriously harm our financial condition and increase our expenses. In the past, hurricanes have adversely impacted the performance of two of our production facilities located in Florida. We have a production facility outside Ho Chi Minh City, Vietnam. This area, in the tropics and close to the sea, may be vulnerable to storms, floods and typhoons.
Operations outside of the United States may be affected by legal and regulatory risks and government reviews, inquiries or investigations could harm the Company’s business.
The Company’s operations in both Vietnam and Canada and the business it conducts outside the United States are subject to risks relating to compliance with legal and regulatory requirements in the United States as well as in local jurisdictions. Additionally, there is a risk of potentially higher incidence of fraud or corruption in certain foreign jurisdictions and greater difficulty in maintaining effective internal controls. From time to time, the Company may conduct internal investigations and compliance reviews to ensure that the Company is in compliance with applicable laws and regulations. Additionally, the Company could be subject to inquiries or investigations by government and other regulatory bodies. Any determination that the Company’s operations or activities are not in compliance with United States laws, including the Foreign Corrupt Practices Act, or various international laws and regulations could expose the Company to significant fines, penalties or other sanctions that may harm the business and reputation of the Company.
If we are unable to maintain effective internal control over our financial reporting, investors could lose confidence in the reliability of our financial statements, which could result in a reduction in the value of our common stock.
As required by Section 404 of the Sarbanes-Oxley Act of 2002 (the "Sarbanes-Oxley Act"), the SEC adopted rules requiring public companies to include a report of management on the companies’ internal control over financial reporting in

14

Table of Contents

their annual reports on Form 10-K. The report must contain an assessment by management of the effectiveness of our internal control over financial reporting. In addition, the independent registered public accounting firm auditing a company’s financial statements must attest to and report on the effectiveness of the company’s internal control over financial reporting, if the company’s public equity float remains above certain thresholds.
We are continuing our comprehensive efforts to comply with Section 404 of the Sarbanes-Oxley Act. If we are unable to maintain effective internal control over financial reporting, this could lead us to issue a financial restatement or otherwise cause us to fail to meet our reporting obligations to the SEC, or could result in a finding by our independent auditors of a significant deficiency or material weakness in our controls over financial reporting, which, in turn, could result in an adverse reaction to our stock in the financial markets due to a loss of confidence in the reliability of our financial statements.
The efficiency of our operations could be adversely affected by disruptions to our information technology (IT) services and cyber incidents.
We rely in part on various IT systems to manage our operations and to provide analytical information to management. In addition, a significant portion of internal communications, as well as communication with customers and suppliers, depends on information technology. We are exposed to the risk of cyber incidents in the normal course of business. Cyber incidents may be deliberate attacks for the theft of intellectual property, money or sensitive information or may be the result of unintentional events. Like most companies, the Company's information technology systems may be vulnerable to interruption due to a variety of events beyond the Company's control, including, but not limited to, natural disasters, terrorist attacks, power and/or telecommunications failures, computer viruses, hackers and other security issues. The Company has technology security initiatives and disaster recovery plans in place to mitigate the Company's risk to these vulnerabilities, but these measures may not be adequate or implemented properly to ensure that the Company's operations are not disrupted. Potential consequences of a material cyber incident include damage to our reputation, litigation, inefficiencies or production down-times and increased cyber security protection and remediation costs. Such consequences could have a negative impact on our ability to meet customers’ orders, resulting in a delay or decrease to our revenue and a reduction to our operating margins.
Our operating results may be subject to seasonality.
While overall sales can fluctuate during the year in each of our segments, revenues from our MDS segment are typically higher in the second half of the Company's fiscal year. Various factors can affect the distribution of our revenue between accounting periods, mainly timing of customer demand.
Fluctuations in foreign currency exchange rates could increase operating costs.
A portion of the Company’s operations and some customers are in foreign locations. While a significant portion of the Company's transactions are in U.S. dollars, some transactions occur in other currencies. Currency exchange rates fluctuate on a daily basis as a result of a number of factors and cannot be easily predicted. Volatility in the U.S. dollar could seriously harm our business, operating results and financial condition and could affect our ability to maintain or grow our revenues with international customers. Additionally, currency exchange fluctuations related to the remeasurement of the Company’s Canadian and Vietnamese financial statements into U.S. dollars could have a negative impact on our reported results. The Company currently does not use financial instruments to hedge foreign currency fluctuation and unexpected expenses could occur from future fluctuations in exchange rates.
Our growth strategies could be ineffective due to the risks of acquisitions and risks relating to integration.
Our growth strategy has included acquiring complementary businesses. If such a strategy was determined to be necessary in the future, we could fail to identify, finance or complete suitable acquisitions on acceptable terms and prices. Acquisitions and the related integration process could increase a number of risks, including diversion of operations personnel, financial personnel and management’s attention, difficulties in integrating systems and operations, potential loss of key employees and customers of the acquired companies and exposure to unanticipated liabilities. The price we pay for a business may exceed the value realized and we cannot provide any assurances of expected synergies and benefits of any acquisition. Our discovery of, or failure to discover, material issues during due diligence investigations of acquisition targets, either before closing with regard to potential risks of the acquired operations, or after closing with regard to the timely discovery of breaches of representations or warranties, could materially harm our business. Acquisitions also may result in the recording of goodwill and other intangible assets which are subject to potential impairments in the future that could harm our financial position and operating results. As a result of such integration risks, as well as other factors, the Company recognized an impairment of goodwill of $64.2 million in its MDS segment in fiscal 2016.

15

Table of Contents

ITEM 1B.    UNRESOLVED STAFF COMMENTS
None.


16

Table of Contents

ITEM 2.    PROPERTIES
The following is a listing of Sparton’s principal properties as of July 3, 2016. As described below, Sparton owns some of these properties and leases others. These facilities provide a total of approximately 825,000 square feet of manufacturing and administrative space. There are manufacturing and office facilities at most locations. Sparton’s manufacturing facilities in aggregate are underutilized. Underutilized percentages vary by plant; however, ample space exists to accommodate expected growth. Sparton believes these facilities are suitable for its operations.
Segment/Location
Square Feet
 
Ownership
 
Time remaining on existing lease term
 
Additional lease terms at Company's option
 
Manufacturing & Design Services Segment:
 
 
 
 
 
 
 
 
Strongsville, Ohio
60,000

 
Owned
 
 
 
Frederick, Colorado
65,000

 
Leased
 
1 year
 
5 years
 
Watertown, South Dakota
125,000

 
Owned
 
 
 
Plymouth, Minnesota
10,000

 
Leased
 
5 years
 
5 years
 
Irvine, California
30,000

 
Sub-leased
 
2 years
 
2 years
(a)
Pittsford, New York
12,000

 
Leased
 
4 years
 
5 years
 
Brooksville, Florida
125,000

 
Owned
 
 
 
Thuan An District, Binh Duong Province, Vietnam (Outside of Ho Chi Minh City)
55,000

 
Owned
 
 
 
Plaistow, New Hampshire
20,000

 
Leased
 
18 months
 
2 years
 
Irvine, California
24,000

 
Leased
 
18 months
 
 
Lawrenceville, Georgia
51,860

 
Sub-leased
 
1 year
 
3 years
(a)
Milpitas, California
62,000

 
Leased
 
4.5 years
 
5 years
 
Engineered Components and Products Segment:
 
 
 
 
 
 
 
 
De Leon Springs, Florida
183,000

 
Owned
 
 
 
Birdsboro, Pennsylvania
41,000

 
Leased
 
2 years
 
5 years
(b)
Woodbridge, Ontario, Canada
21,000

 
Leased
 
4 years
(c)
5 years
(c)
Corporate Office:
 
 
 
 
 
 
 
 
Schaumburg, Illinois
22,000

 
Leased
 
9 years
 
5 years
 
 
 
(a) Irvine, California and Lawrenceville, Georgia locations have been sub-leased and neither of these facilities are currently used for manufacturing or administrative purposes
(b) Lease terms include two option periods of five years each
(c) Lease terms include two leased facilities with identical lease termination and options to extend
While the Company owns the building and other assets in Vietnam, the land is occupied under a long-term lease covering forty years of which twenty-nine years remain. This lease is prepaid, with the cost amortized over the term of the lease and carried in other long-term assets on our balance sheet.
As of July 3, 2016, substantially all of our assets, including real estate, are pledged as collateral to secure any potential borrowings under our revolving line-of-credit facility. See Note 8, Debt, of the “Notes to Consolidated Financial Statements” in this Form 10-K for further information related to our credit facility. 
ITEM 3.    LEGAL PROCEEDINGS
See Note 11, Commitments and Contingencies, of the “Notes to Consolidated Financial Statements” of this Form 10-K for information concerning legal proceedings.
ITEM 4.    MINE SAFETY DISCLOSURES
Not applicable.

17

Table of Contents

PART II
 
ITEM 5.    MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES
Market Information. Our common stock is traded on the New York Stock Exchange (“NYSE”) under the symbol “SPA”.
The table below sets forth the high and low closing prices of our common stock as reported by the NYSE for each quarter during the last two years:
 
Quarter
 
1st
 
2nd
 
3rd
 
4th
Fiscal year 2016
 
 
 
 
 
 
 
High
$
26.91

 
$
25.31

 
$
21.64

 
$
22.45

Low
$
21.21

 
$
19.03

 
$
12.46

 
$
17.71

Fiscal year 2015
 
 
 
 
 
 
 
High
$
30.25

 
$
28.75

 
$
27.56

 
$
28.97

Low
$
24.28

 
$
23.70

 
$
21.10

 
$
24.78

Holders. As of August 31, 2016, there were 337 record holders of our common stock. The number of record holders does not include beneficial owners whose shares are held in the names of banks, brokers, nominees or other fiduciaries.
Dividends. The Company has not declared or paid dividends on our common stock in fiscal years 2016 and 2015.
Securities Authorized for Issuance Under Equity Compensation Plans. See our disclosure below in “Part III, Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.”

18

Table of Contents

Performance Graph. The performance graph below compares the cumulative total shareholder return on our common stock for the past five fiscal years against the cumulative total return of a broad market index (Russell 2000 Index) and a peer group index, which is composed of AeroVironment, Inc., American Science and Engineering, Inc., Analogic Corporation, AngioDynamics, Inc., Astronics Corporation, CTS Corporation, Ducommun, Inc., Exactech, Inc., Integer Holdings Corporation (prior to July 1, 2016, known as Greatbatch, Inc.), Key Tronic Corporation, Kimball Electronics, Inc., LMI Aerospace, Inc., Maxwell Technologies, Inc., Mercury Systems, Inc., Raven Industries, Inc., Sigmatron International Inc., SMTC Corp., Sypris Solutions, Inc., and Universal Electronics, Inc. The comparative peer group was selected based on a review of publicly available information about these companies and the Company’s determination that they are engaged in electronics manufacturing businesses similar to that of the Company or its reportable operating segments.
The graph assumes that $100.00 was invested in our common stock and in each index on June 30, 2011. The total return for the common stock and the indices used assumes the reinvestment of dividends, if any. The comparisons in the graph below are based upon historical data and are not indicative of, nor intended to forecast, future performance of our common stock.
Comparison of Cumulative Total Return
Among Sparton Corporation,
Russell 2000 Index and Peer Group Index
spa-2015630_charta01.jpg 
 
 
6/30/2011
 
6/30/2012
 
6/30/2013
 
6/30/2014
 
6/30/2015
 
7/3/2016
Sparton Corporation
100.00

 
96.87

 
168.69

 
271.43

 
267.32

 
219.67

Russell 2000 Index
100.00

 
97.92

 
121.63

 
150.38

 
160.13

 
149.99

Peer Group
100.00

 
84.68

 
101.74

 
121.93

 
112.43

 
103.38


19

Table of Contents

ITEM 6.    SELECTED FINANCIAL DATA
The following table sets forth a summary of selected financial data for the last five fiscal years. This selected financial data should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our Audited Consolidated Financial Statements and, in each case, any related notes thereto included elsewhere in this report (dollars in thousands, except per share data).
 
2016 (a)
 
2015 (a)
 
2014 (a)
 
2013 (a) (b)
 
2012 (a) (b)
Operating results:
 
 
 
 
 
 
 
 
 
Net sales
$
419,362

 
$
382,125

 
$
336,501

 
$
265,003

 
$
226,455

Cost of goods sold
339,214

 
307,311

 
271,551

 
219,192

 
187,423

Gross profit
80,148

 
74,814

 
64,950

 
45,811

 
39,032

Selling and administrative expenses
55,151

 
46,969

 
35,682

 
26,464

 
22,297

Internal research and development expenses
2,344

 
1,502

 
1,169

 
1,300

 
1,293

Amortization of intangible assets
9,592

 
6,591

 
3,422

 
1,575

 
435

Restructuring charges
2,206

 

 
188

 
55

 
(68
)
Reversal of accrued contingent consideration
(1,530
)
 

 

 

 

Impairment of goodwill
64,174

 

 

 

 

Legal settlement

 
2,500

 

 

 

Environmental remediation

 

 
4,238

 

 

Operating (loss) income
(51,789
)
 
17,252

 
20,251

 
16,417

 
15,075

Total other expense, net
(3,710
)
 
(2,297
)
 
(649
)
 
(245
)
 
41

(Loss) income before income taxes
(55,499
)
 
14,955

 
19,602

 
16,172

 
15,116

Income taxes
(17,216
)
 
3,966

 
6,615

 
2,702

 
5,269

Net (loss) income
$
(38,283
)
 
$
10,989

 
$
12,987

 
$
13,470

 
$
9,847

Weighted average shares of common stock outstanding:
 
 
 
 
 
 
 
 
 
Basic
9,786,315

 
9,874,441

 
10,109,915

 
10,193,530

 
10,174,176

Diluted
9,786,315

 
9,885,961

 
10,141,395

 
10,228,687

 
10,208,810

(Loss) income per share of common stock:
 
 
 
 
 
 
 
 
 
Basic
$
(3.91
)
 
$
1.10

 
$
1.28

 
$
1.32

 
$
0.97

Diluted
(3.91
)
 
1.10

 
1.28

 
1.32

 
0.96

Shareholders’ equity — per share
8.03

 
11.82

 
10.87

 
9.52

 
8.16

Cash dividends — per share

 

 

 

 

Other financial data:
 
 
 
 
 
 
 
 
 
Total assets
245,998

 
337,551

 
198,980

 
165,922

 
144,278

Working capital
68,167

 
116,962

 
75,443

 
51,184

 
59,839

Working capital ratio
2.09:1

 
2.99:1

 
2.83:1

 
1.92:1

 
2.08:1

Debt (including capital leases)
$
97,755

 
$
154,500

 
$
41,000

 
$
11,539

 
$
1,669

Shareholders’ equity
78,628

 
116,879

 
110,115

 
96,072

 
82,980

 
(a)
Operating results of acquired businesses have been included in the Company’s consolidated financial results since the dates of respective acquisitions.
(b)
Fiscal years 2012 and 2013 reflect the retroactive impact of the Company's fiscal year 2014 change in its revenue recognition policy related to its ECP sonobuoy sales.

20

Table of Contents

ITEM 7.    MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
The following is an analysis of the Company’s results of operations, liquidity and capital resources and should be read in conjunction with the Consolidated Financial Statements and notes related thereto included in this Form 10-K. To the extent that the following Management’s Discussion and Analysis contains statements which are not of a historical nature, such statements are forward-looking statements which involve risks and uncertainties. These risks include, but are not limited to the risks and uncertainties discussed in “Item 1A Risk Factors” in this Annual Report on Form 10-K. The following discussion and analysis should be read in conjunction with the “Forward Looking Statements” and “Item 1A Risk Factors” each included in this Annual Report on Form 10-K.
Business Overview
General
Sparton Corporation and subsidiaries (the “Company” or “Sparton”) has been in continuous existence since 1900. It was last reorganized in 1919 as an Ohio corporation. The Company is a provider of design, development and manufacturing services for complex electromechanical devices, as well as sophisticated engineered products complementary to the same electromechanical value stream. The Company serves the Medical & Biotechnology, Military & Aerospace and Industrial & Commercial markets through two reportable business segments; Manufacturing & Design Services (“MDS”) and Engineered Components & Products (“ECP”). Prior to fiscal year 2015, the Company reported under three reportable business segments; Medical Device (“Medical”), Complex Systems (“CS”) and Defense & Security Systems (“DSS”). The prior periods herein reflect this change in segment reporting. See Note 16, Business Segments, of the "Notes to Consolidated Financial Statements" in this Form 10-K for a further discussion of business segments.
Reportable segments are defined as components of an enterprise for which separate financial information is available and is evaluated regularly by the chief operating decision maker ("CODM") in assessing performance and allocating resources. The Company's CODM is its Senior Vice President of Operations. During the first quarter of fiscal year 2015, the Company changed the way it internally reports, manages and the CODM evaluates the business and subsequently revised its reportable segments. The prior reportable segments of Medical and Complex Systems have been combined and are referred to as Manufacturing and Design Services ("MDS"). The Company's Medical customers (former Medical segment) and Military & Aerospace customers (former Complex Systems segment) have been combined as the economics of the underlying customer base, the nature of the products and services and the production process are significantly similar. As a result of this change in the reporting of segments, the CODM's assessment of the performance of medical customers separately from Military & Aerospace customers is no longer meaningful in assessing performance and allocating resources. In the MDS segment, the Company performs contract manufacturing and design services utilizing customer-owned intellectual property. The prior Defense and Security Systems reportable segment is now referred to as Engineered Components and Products ("ECP"). In the ECP segment, the Company performs manufacturing and design services using the Company's intellectual property. The Company has restated the prior periods to conform to the current year's presentation.
The Company uses an internal management reporting system, which provides important financial data to evaluate performance and allocate the Company's resources on a segment basis. Net sales are attributed to the segment in which the product is manufactured or service is performed. A segment's performance is evaluated based upon its operating income, contribution margin, gross margin and a variety of other factors. A segment's operating income includes its gross profit on sales less its selling and administrative expenses, including allocations of certain corporate operating expenses. Certain corporate operating expenses are allocated to segment results based on the nature of the service provided. Other corporate operating expenses, including certain administrative, financial and human resource activities as well as items such as interest expense, interest income, other income (expense) and income taxes, are not allocated and are excluded from segment profit. These costs are not allocated to the segments, as management excludes such costs when assessing the performance of the segments. Inter-segment transactions are generally accounted for at amounts that approximate arm's length transactions. Identifiable assets by segments are those assets that are used in each segment's operations. The accounting policies for each of the segments are the same as for the Company taken as a whole.
All of the Company's facilities are certified to one or more of the ISO/AS standards, including ISO 9001, AS9100 and ISO 13485, with most having additional certifications based on the needs of the customers they serve. The majority of the Company's customers are in highly regulated industries where strict adherence to regulations such as the International Tariff and Arms Regulations ("ITAR") is necessary. The Company's products and services include offerings for Original Equipment Manufacturers (“OEM”) and Emerging Technology (“ET”) customers that utilize microprocessor-based systems which include transducers, printed circuit boards and assemblies, sensors and electromechanical components, as well as development and design engineering services relating to these product sales. Sparton also develops and manufactures sonobuoys, anti-submarine warfare (“ASW”) devices used by the United States Navy as well as by foreign governments that meet Department of State

21

Table of Contents

licensing requirements. Additionally, Sparton manufactures rugged flat panel display systems for military panel PC workstations, air traffic control and industrial applications, as well as high performance industrial grade computer systems and peripherals. Many of the physical and technical attributes in the production of these proprietary products are similar to those required in the production of the Company's other electrical and electromechanical products and assemblies.
On April 27, 2016, Sparton announced that its Board of Directors had authorized a process to identify parties interested in acquiring the Company. This process is ongoing and there can be no assurance that this process will result in a consummation of any transaction. The Company cannot currently determine if the process will ultimately conclude in a sale of all or some of its assets. As such, no adjustments have been made to the Company’s carrying value of its assets or liabilities as a result of the contemplated sale.
Manufacturing and Design Services Segment
Manufacturing and Design Services segment operations are comprised of contract design, manufacturing and aftermarket repair and refurbishment of sophisticated printed circuit card assemblies, sub-assemblies, full product assemblies and cable/wire harnesses for customers seeking to bring their intellectual property to market. Additionally, Sparton is a developer of embedded software and software quality assurance services in connection with medical devices and diagnostic equipment. Customers include OEM and ET customers serving the Medical & Biotechnology, Military & Aerospace and Industrial & Commercial markets. In engineering and manufacturing for its customers, this segment adheres to very strict military and aerospace specifications, Food and Drug Administration (“FDA”) guidelines and approvals, in addition to product and process certifications.
Engineered Components and Products
Engineered Components and Products segment operations are comprised of design, development and production of proprietary products for both domestic and foreign defense as well as commercial needs. Sparton designs and manufactures ASW devices known as sonobuoys for the U.S. Navy and foreign governments that meet Department of State licensing requirements. This segment also performs an engineering development function for the United States military and prime defense contractors for advanced technologies, ultimately leading to future defense products, as well as replacements for existing products. The sonobuoy product line is built to stringent military specifications. These products are restricted by International Tariff and Arms Regulations (“ITAR”) and qualified by the U.S. Navy, which limits opportunities for competition. Sparton is also a provider of rugged flat panel display systems for military panel PC workstations, air traffic control and industrial and commercial marine applications, as well as high performance industrial grade computer systems and peripherals. Rugged displays are manufactured for prime contractors, in some cases to specific military grade specifications. Additionally, this segment internally develops and markets commercial products for underwater acoustics and microelectromechanical (“MEMS”)-based inertial measurement.
Risks and Uncertainties
Sparton, as a high-mix, low to medium volume supplier, provides rapid product turnaround for customers. High-mix describes customers needing multiple product types with generally low to medium volume manufacturing runs. As a contract manufacturer with customers in a variety of markets, the Company has substantially less visibility of end user demand and, therefore, forecasting sales can be problematic. Customers may cancel their orders, change production quantities and/or reschedule production for a number of reasons. Depressed economic conditions may result in customers delaying delivery of product, or the placement of purchase orders for lower volumes than previously anticipated. Unplanned cancellations, reductions or delays by customers may negatively impact the Company's results of operations. As many of the Company's costs and operating expenses are relatively fixed within given ranges of production, a reduction in customer demand can disproportionately affect the Company's gross margins and operating income. The majority of the Company's sales have historically come from a limited number of customers. Significant reductions in sales to, or a loss of, one of these customers could materially impact our operating results if the Company were not able to replace those sales with new business.
Other risks and uncertainties that may affect our operations, performance, growth forecasts and business results include, but are not limited to, timing and fluctuations in U.S. and/or world economies, sharp volatility of world financial markets over a short period of time, competition in the overall contract manufacturing business, availability of production labor and management services under terms acceptable to the Company, congressional budget outlays for sonobuoy development and production, congressional legislation, uncertainties associated with the outcome of litigation, changes in the interpretation of environmental laws and the uncertainties of environmental remediation and customer labor and work strikes. Further risk factors are the availability and cost of materials, as well as non-cancelable purchase orders we have committed to in relation to customer forecasts that can be subject to change. A number of events can impact these risks and uncertainties, including potential escalating utility and other related costs due to natural disasters, as well as political uncertainties such as the unrest in Africa and the Middle East and increased tension between Vietnam and China over oil rights in the South China Sea. Additional trends, risks and uncertainties include dependence on key personnel, risks surrounding acquisitions, uncertainties

22

Table of Contents

surrounding the global economy, U.S. healthcare legislation, U.S. budget sequestration and debt ceiling negotiations and the effects of those uncertainties on OEM behavior, including heightened inventory management, product development cycles and outsourcing strategies. Finally, the Sarbanes-Oxley Act, and more recently the Dodd-Frank Act, have required or will require changes in, and formalization of, some of the Company's corporate governance and compliance practices. The SEC and the New York Stock Exchange have also passed or will pass related rules and regulations requiring additional compliance activities, including those implementing the conflict minerals provisions of the Dodd-Frank Act. Compliance with these rules has increased administrative costs and may increase these costs further in the future. A further discussion of the Company’s risk factors has been included in Part I, Item 1A, “Risk Factors”, of this Annual Report on Form 10-K. Management cautions readers not to place undue reliance on forward-looking statements, which are subject to influence by the enumerated risk factors as well as unanticipated future events.
Acquisitions
Fiscal Year 2015
Hunter Technology Corporation
On April 14, 2015, the Company acquired Hunter Technology Corporation ("Hunter"), with operations located in Milpitas, CA and Lawrenceville, GA, for $55.0 million. Hunter, which is part of the Company's MDS segment, provides electronic contract manufacturing in military and aerospace applications. Hunter provides engineering design, new product introduction and full-rate production manufacturing solutions working with major defense and aerospace companies, test and measurement suppliers, secure networking solution providers, medical device manufacturers and a wide variety of industrial customers.
Stealth.com
On March 16, 2015, the Company acquired substantially all of the assets of Stealth.com ("Stealth"), located in Woodbridge, ON, Canada, for $16.0 CAD ($12.6 USD) million. The acquired business, which is part of the Company's ECP segment, is a supplier of high performance rugged industrial grade computer systems and peripherals that include Mini PC/Small Form Factor Computers, Rackmount Server PCs, Rugged Industrial LCD Monitors, Rugged Portable PCs, Industrial Grade Keyboards and Rugged Trackballs and Mice.
KEP Marine
On January 21, 2015, the Company acquired certain assets of KEP Marine, a division of Kessler-Ellis Products, located in Eatontown, NJ, for $4.3 million. The acquired business, which is part of the Company's ECP segment, designs and manufactures industrial displays, industrial computers and HMI software for the Marine market. These product lines have been consolidated into the Aydin Displays facility, located in Birdsboro, PA.
Real-Time Enterprises, Inc.
On January 20, 2015, the Company acquired Real-Time Enterprises, Inc. ("RTEmd"), located in Pittsford, NY, for $2.3 million. RTEmd will continue to service its current and future customers out of its Pittsford, NY location. The acquired business, which is part of the Company's MDS segment, is a developer of embedded software to operate medical devices and diagnostic equipment through a disciplined approach to product development and quality/regulatory services with specific product experience such as patient monitoring, medical imaging, in-vitro diagnostics, electro-medical systems, surgical applications, ophthalmology, nephrology, infusion pumps and medical imaging.
Argotec, Inc.
On December 8, 2014, the Company acquired certain assets of Argotec, Inc. ("Argotec"), located in Longwood, FL, for $0.4 million. The acquired business, which is part of the Company's ECP segment, is engaged in developing and manufacturing sonar transducer products and components for the U.S. Navy and also provides aftermarket servicing. These products have been consolidated into the Company's DeLeon Springs, FL location.
Industrial Electronic Devices, Inc.
On December 3, 2014, the Company acquired certain assets of Industrial Electronic Devices, Inc. ("IED"), located in Flemington, NJ, for $3.3 million. The acquired business, which is part of the Company's ECP segment, designs and manufactures a full line of rugged displays for the Industrial and Marine markets. IED's catalog spans over 600 standard, semi-custom and custom configurations, incorporating some of the most advanced flat panel displays and touch screen technology available. These product lines have been consolidated into the Aydin Displays facility, located in Birdsboro, PA.
Electronic Manufacturing Technology, LLC.

23

Table of Contents

On July 9, 2014, the Company acquired Electronic Manufacturing Technology, LLC. (“eMT”), located in Irvine, CA, for $22.1 million, which included $1.5 million of acquired cash. The acquired business, which is part of the Company's MDS segment, is engaged in the contract services business of manufacturing electromechanical controls and electronic assemblies. Their customer profile includes international Fortune 1000 manufacturers of highly reliable industrial excimer laser products, laser eye surgery sub-assemblies, target simulators for space and aviation systems, power modules for computerized tomography products, test systems for commercial aerospace OEMs and toll road antennas and control boxes.
Fiscal Year 2014
Aubrey Group, Inc.
On March 17, 2014, the Company acquired Aubrey Group, Inc. ("Aubrey”), located in Irvine, CA, for $5.0 million. The acquired business, a design and manufacturing company, which is part of the MDS segment, develops new products for OEMs in the Medical and Biotechnological markets. Inventors, entrepreneurs and industry leading OEMs utilize Aubrey's design and engineering teams to develop innovative solutions in a timely manner, delivering its clients' new products into the marketplace faster and more cost effectively.
Beckwood Services, Inc.
On December 11, 2013, the Company acquired Beckwood Services, Inc. ("Beckwood”), located in Plaistow, N.H., for $15.3 million. The acquired business, which is part of the Company's MDS segment, develops electronic or electro-mechanical controls and electronic assemblies. Their customer profile includes international Fortune 1000 manufacturers of industrial control systems, analytical instruments, measuring and detecting equipment and military, defense and Homeland Security equipment.
Aydin Displays, Inc.
On August 30, 2013, the Company acquired certain assets and liabilities of Aydin Displays, Inc. ("Aydin Displays" or “Aydin”), located in Birdsboro, PA, for $15.5 million. The acquired business, which is part of the Company's ECP segment, develops enhanced flat panel display and touch-screen solutions with application-critical performance criteria including ruggedization, high resolution, color accuracy, response/refresh times, sunlight readability and other criteria such as magnetic interference and emanations security for the Military & Aerospace and Civil Marine markets. These products are currently specified in the U.S. Navy P8A Poseidon ASW aircraft behind-the-cockpit control center, the command and control centers of many U.S. Navy ships, Federal Aviation Administration air traffic control systems and cockpit command centers for various civil marine applications. The acquired business will continue to operate as Aydin Displays.
For purposes of discussion and analysis, we categorize our operations as legacy business or acquired business. We reflect operations as legacy business if the underlying operation has been included in the Company’s consolidated results of operations for all periods being discussed. Certain acquired businesses may be reflected as legacy business for quarterly purposes, but may be reflected as acquired business for the annual period as the results of operations were not included for the entire prior fiscal year. The table below reflects our recent acquisitions and how the results of operations will be reflected as legacy or acquired for the quarterly and annual discussion of our results of operations.
 
 
 
Reporting period discussed as Legacy Business
Company
Acquisition Date
Quarter Acquired
Quarterly
Quarterly, year-to-date
Annual
Hunter Technology Corporation
04/14/15
Q4 2015
Q1 2017
Q2 2017
2017
Stealth.com
03/16/15
Q3 2015
Q4 2016
Q2 2017
2017
KEP Marine
01/21/15
*
Real-Time Enterprises, Inc.
01/20/15
Q3 2015
Q4 2016
Q2 2017
2017
Argotec, Inc.
12/08/14
*
Industrial Electronic Devices, Inc.
12/03/14
*
Electronic Manufacturing Technology, LLC
07/09/14
Q1 2015
Q1 2016
Q2 2016
2016
Aubrey Group, Inc.
03/17/14
Q3 2014
Q4 2015
Q2 2016
2016
Beckwood Services, Inc.
12/11/13
Q2 2014
Q3 2015
Q2 2016
2016
Aydin Displays, Inc.
08/30/13
Q1 2014
Q2 2015
Q2 2016
2016
* Acquisition was treated as a "tuck in acquisition" and therefore is treated as legacy business as of the date of acquisition as stand-alone financial information is not available.

24

Table of Contents

Consolidated Results of Operations
Presented below are more detailed comparative data and discussions regarding our consolidated and reportable segment results of operations for fiscal year 2016 compared to fiscal year 2015, and fiscal year 2015 compared to fiscal year 2014.
For fiscal year 2016 compared to fiscal year 2015
The following table presents selected consolidated statements of operations data (dollars in thousands):
CONSOLIDATED
 
For fiscal years
 
2016
 
2015
 
Total
 
% of Sales
 
Total
 
% of Sales
Net sales:
 
 
 
 
 
 
 
Legacy business
$
338,776

 
80.8
 %
 
$
364,187

 
95.3
 %
Acquired business
80,586

 
19.2

 
17,938

 
4.7

Total net sales
419,362

 
100.0

 
382,125

 
100.0

Cost of goods sold
339,214

 
80.9

 
307,311

 
80.4

Gross profit
80,148

 
19.1

 
74,814

 
19.6

Selling and administrative expenses
55,151

 
13.2

 
46,969

 
12.3

Internal research and development expenses
2,344

 
0.5

 
1,502

 
0.4

Amortization of intangible assets
9,592

 
2.3

 
6,591

 
1.7

Restructuring charges
2,206

 
0.5

 

 

Reversal of accrued contingent consideration
(1,530
)
 
(0.4
)
 

 

Impairment of goodwill
64,174

 
15.3

 

 

Legal settlement

 

 
2,500

 
0.7

Operating (loss) income
(51,789
)
 
(12.3
)
 
17,252

 
4.5

Other expense, net
(3,710
)
 
(0.9
)
 
(2,297
)
 
(0.6
)
(Loss) income before income taxes
(55,499
)
 
(13.2
)
 
14,955

 
3.9

Income taxes
(17,216
)
 
(4.1
)
 
3,966

 
1.0

Net (loss) income
$
(38,283
)
 
(9.1
)%
 
$
10,989

 
2.9
 %
The decrease in legacy business sales reflects the inability to achieve sufficient organic growth to offset the loss of a large customer due to insourcing, as well as revenue declines due to fluctuations in customer demand across the MDS reporting unit and a reduction in sonobuoy revenues to the U.S. Navy as a result of the ramp-up of a new program, partially offset by increased sonobuoy sales to foreign governments and increased advanced engineering revenues in the ECP segment.
The decrease in gross margin was due to an unfavorable shift in product mix and the facility closure in the MDS segment. The increase in selling and administrative expenses is due to the expenses from companies acquired in the prior year, professional fees and other expenses associated with the Company’s strategic alternatives review and potential sale of the Company and investment in the Company’s business development infrastructure.
The increase in amortization of intangible assets relates to certain intangible assets acquired as part of the acquisitions in fiscal year 2015. Restructuring charges relate to the closing of the Company’s Lawrenceville, GA manufacturing operations and consolidation of its Irvine, CA design center into its Irvine, CA manufacturing operations.
Accrued contingent consideration related to Hunter of $1.2 million and RTEmd of $0.3 million, both in the MDS segment, was reversed as these acquired companies did not meet the required performance thresholds necessary to earn their respective contingent considerations.
Interest expense consists of interest and fees on the Company's outstanding debt and revolving credit facility, including amortization of financing costs. Interest expense was $3.8 million and $2.5 million for fiscal years 2016 and 2015, respectively. The comparative interest expense reflects increased average borrowings under the Company’s credit facility between the two periods, partially offset by lower amortization of loan financing fees, as fiscal year 2015 included accelerated amortization of loan financing fees in relation to the Company's old facility replaced during first quarter of fiscal year 2015. See Note 8, Debt, of the “Notes to Consolidated Financial Statements” in this Form 10-K for a further discussion of debt.

25

Table of Contents

The decline in value in the MDS reporting unit was as a result of the underperformance of the Company’s most recent acquisition (Hunter Technology Corporation), and the inability to achieve sufficient organic growth to offset the loss of a large customer due to insourcing, as well as revenue declines due to fluctuations in customer demand across the MDS reporting unit. It was determined that goodwill within this reporting unit was fully impaired. As such, the Company recorded an impairment of goodwill charge of $64.2 million. The fair value of the Company’s ECP reporting unit was in excess of its carrying value and, as such, indicated no impairment of goodwill.
The Company recorded an income tax benefit of $17.2 million, or 31.0% of loss before income taxes in fiscal year 2016. Our tax rate is affected by recurring items, such as tax rates in foreign jurisdictions and the relative amounts of income or loss we earn in those jurisdictions, state income taxes and the domestic production activities deduction. The Company recognized a number of discrete income tax items during fiscal year 2016, which also affects our tax rate, but are not consistent from year to year. In relation to an impairment analysis of goodwill, the Company recognized a discrete income tax benefit of $4.6 million for fiscal year 2016. In relation to an extensive research and development study for the current and prior three tax years for which a refund claim is anticipated, the Company recognized discrete income tax expense of $0.8 million. Additional discrete items include return to provision adjustments, certain jurisdictional audit adjustments and changes in state apportionment factors. Excluding these discrete tax items, the Company recorded an income tax benefit of $21.3 million, or 38.4%, of loss before income taxes, for fiscal year 2016. See Note 9, Income Taxes, of the “Notes to Consolidated Financial Statements” in this Form 10-K for a further discussion of income taxes.
Due to the factors described above, the Company reported net loss of $38.3 million, or $3.91 loss per share for fiscal year 2016, compared to net income of $11.0 million, or $1.10 per share for the fiscal year 2015.
MDS
The following table presents selected consolidated statements of operations data (dollars in thousands):
 
For fiscal years
 
2016
 
% of Sales
 
2015
 
% of Sales
 
$ Chg
 
% Chg
Net sales:
 
 
 
 
 
 
 
 
 
 
 
Legacy business
$
191,408

 
67.9
 %
 
$
230,787

 
87.5
%
 
$
(39,379
)
 
(17.1
)%
Acquired business
73,640

 
26.1

 
15,397

 
5.8

 
58,243

 
N/A
Intercompany
17,028

 
6.0

 
17,756

 
6.7

 
(728
)
 
(4.1
)
   Total net sales
282,076

 
100.0

 
263,940

 
100.0

 
18,136

 
6.9

Gross profit
34,788

 
12.3

 
36,461

 
13.8

 
(1,673
)
 
(4.6
)
Selling and administrative expenses
23,813

 
8.4

 
18,615

 
7.1

 
5,198

 
27.9

Amortization of intangible assets
7,938

 
2.7

 
5,811

 
2.2

 
2,127

 
36.6

Restructuring charges
2,206

 
0.8

 

 

 
2,206

 

Reversal of accrued contingent consideration
(1,530
)
 
(0.5
)
 

 

 
(1,530
)
 

Impairment of goodwill
64,174

 
22.8

 

 

 
64,174

 

Legal settlement

 

 
2,500

 
0.9

 
(2,500
)
 
(100.0
)
Operating (loss) income
$
(61,813
)
 
(21.9
)%
 
$
9,535

 
3.6
%
 
$
(71,348
)
 
N/A
The decrease in legacy business sales was due to the inability to achieve sufficient organic growth to offset the loss of a large customer due to insourcing, as well as revenue declines due to fluctuations in customer demand across the MDS reporting unit. These decreases were partially offset by increased sales from new and existing customer programs. MDS backlog was $138.5 million at July 3, 2016 compared to $170.1 million at June 30, 2015. Commercial orders, in general, may be rescheduled or canceled without significant penalty, as a result, may not be a meaningful measure of future sales. A majority of the July 3, 2016 MDS backlog is currently expected to be realized in the next 12 months.
Gross margin on MDS sales was negatively impacted in the current year by an unfavorable shift in product mix as compared to the prior year. The selling and administrative expense increase is primarily comprised of businesses acquired in the prior year.
The increase in amortization of intangible assets is due to the amortization of customer relationships and non-compete agreements from businesses acquired in the prior year. Restructuring charges relate to the previously discussed closing of the Company’s Lawrenceville, GA manufacturing operations and consolidation of its Irvine, CA design center into its Irvine, CA manufacturing operations. The reversal of accrued contingent consideration related to Hunter and RTEmd, as previously discussed.

26

Table of Contents

The decline in value in the MDS reporting unit was as a result of the underperformance of the Company’s most recent acquisition (Hunter Technology Corporation), and the inability to achieve sufficient organic growth to offset the loss of a large customer due to insourcing, as well as revenue declines due to fluctuations in customer demand across the MDS reporting unit. It was determined that goodwill within this reporting unit was fully impaired. As such, the Company recorded an impairment of goodwill charge of $64.2 million.
ECP
The following table presents selected consolidated statements of income data (dollars in thousands):
 
For fiscal years
 
2016
 
% of Sales
 
2015
 
% of Sales
 
$ Chg
 
% Chg
Net sales:
 
 
 
 
 
 
 
 
 
 
 
Legacy business
$
147,368

 
95.3
%
 
$
133,400

 
97.8
%
 
$
13,968

 
10.5
 %
Acquired business
6,946

 
4.5

 
2,541

 
1.9

 
4,405

 
173.4

Intercompany
245

 
0.2

 
374

 
0.3

 
(129
)
 
(34.5
)
   Total net sales
154,559

 
100.0

 
136,315

 
100.0

 
18,244

 
13.4

Gross profit
45,360

 
29.3

 
38,353

 
28.1

 
7,007

 
18.3

Selling and administrative expenses
15,482

 
10.0

 
11,038

 
8.1

 
4,444

 
40.3

Internal research and development expenses
2,344

 
1.5

 
1,502

 
1.1

 
842

 
56.1

Amortization of intangible assets
1,654

 
1.1

 
780

 
0.5

 
874

 
112.1

Operating income
$
25,880

 
16.7
%
 
$
25,033

 
18.4
%
 
$
847

 
3.4
 %
The increase in ECP legacy business sales reflects increased sonobuoy sales of $10.5 million to foreign governments, increased advanced engineering revenue of $3.9 million and increased rugged flat panel display sales of $3.7 million (includes tuck-in acquisitions sales) partially offset by decreased sonobuoy sales of $5.3 million to the U.S. Navy as a result of new sonobuoy program ramp-up. Total sales to the U.S. Navy for the fiscal years 2016 and 2015 were $93.5 million and $94.9 million, respectively. For the fiscal years 2016 and 2015, sales to the U.S. Navy accounted for 22% and 25%, respectively, of consolidated Company net sales and 61% and 70%, respectively, of ECP segment net sales. ECP backlog was $142.2 million at July 3, 2016 compared to $143.3 million at June 30, 2015. A majority of the July 3, 2016 ECP backlog is currently expected to be realized in the next 18 months.
The increase in gross margin is a result of the higher mix of foreign sonobuoy sales. The increase in selling and administrative expense was due to the prior year acquisition as well as professional service expenses associated with governmental audits and compliance.
The increase in amortization of intangible assets relates to intangible assets acquired in the Stealth, KEP Marine and IED transactions.
Internal research and development expenses reflect costs incurred for the internal development of technologies for use in undersea warfare, navigation, hand held targeting applications as well as rugged computer and display devices. These costs include salaries and related expenses, contract labor and consulting costs, materials and the cost of certain research and development specific equipment.
Eliminations and Corporate Unallocated
The following table presents selected consolidated statements of operations data (dollars in thousands):
 
For fiscal years
 
2016
 
2015
 
$ Chg
 
% Chg
Intercompany sales elimination
$
(17,273
)
 
$
(18,130
)
 
$
857

 
(4.7
)%
Selling and administrative expenses unallocated
15,856

 
17,316

 
(1,460
)
 
(8.4
)
Total corporate selling and administrative expenses before allocation to operating segments were $29.4 million and $27.0 million for fiscal years 2016 and 2015, respectively, or 7.0% and 7.1% of consolidated sales, respectively. Of these costs, $13.5 million and $9.6 million, respectively, were allocated to segment operations in each of these periods. Allocations of corporate selling and administrative expenses are based on the nature of the service provided and can fluctuate from period to period. Decrease in unallocated selling and administrative expenses was a result of the Company's ongoing efforts to reduce corporate selling, general and administrative footprint.

27

Table of Contents

For fiscal year 2015 compared to fiscal year 2014
CONSOLIDATED
The following table presents selected consolidated statements of income data (dollars in thousands):
 
For fiscal years
 
2015
 
2014
 
Total
 
% of Sales
 
Total
 
% of Sales
Net sales:
 
 
 
 
 
 
 
Legacy business
$
297,963

 
78.0
 %
 
$
310,574

 
92.3
 %
Acquired business
84,162

 
22.0

 
25,927

 
7.7

Total net sales
382,125

 
100.0

 
336,501

 
100.0

Cost of goods sold
307,311

 
80.4

 
271,551

 
80.7

Gross profit
74,814

 
19.6

 
64,950

 
19.3

Selling and administrative expenses
46,969

 
12.3

 
35,682

 
10.6

Internal research and development expenses
1,502

 
0.4

 
1,169

 
0.3

Amortization of intangible assets
6,591

 
1.7

 
3,422

 
1.0

Legal settlement
2,500

 
0.7

 

 

Environmental remediation

 

 
4,238

 
1.3

Restructuring charges

 

 
188

 
0.1

Operating income
17,252

 
4.5

 
20,251

 
6.0

Other expense, net
(2,297
)
 
(0.6
)
 
(649
)
 
(0.2
)
Income before income taxes
14,955

 
3.9

 
19,602

 
5.8

Income taxes
3,966

 
1.0

 
6,615

 
1.9

Net income
$
10,989

 
2.9
 %
 
$
12,987

 
3.9
 %
Interest expense consists of interest and fees on the Company's outstanding debt and revolving credit facility, including amortization of financing costs. Interest expense was $2.5 million and $0.8 million for the fiscal years 2015 and 2014, respectively. The comparative interest expense reflects accelerated amortization of loan financing fees in relation to the Company's old facility replaced during the first quarter of fiscal 2015 and comparative borrowings under the Company’s credit facility between the two periods. See Note 8, Debt, of the “Notes to Consolidated Financial Statements” in this Form 10-K for a further discussion of debt.
For fiscal year 2015, the Company recognized $2.5 million of expense related to a legal dispute settled after year end in August of 2015. The liability was recorded on the Consolidated Balance Sheets for June 30, 2015 as other accrued expenses and was paid in the second quarter of fiscal 2016. See Note 11, Commitments and Contingencies, of the “Notes to Consolidated Financial Statements” in this Form 10-K for further discussion. For the fiscal year 2014, the Company recognized a $4.2 million EPA related - net environmental expense in relation to ongoing environmental remediation the Company has been involved with since the early 1980’s. This non-cash charge increased an existing liability and is expected to be realized in subsequent fiscal years through 2030. See Note 11, Commitments and Contingencies, of the “Notes to Consolidated Financial Statements” in this Form 10-K for a further discussion of the Company's environmental remediation activities.
The Company recorded income tax expense of $4.0 million, or 26.5% of income before income taxes, for fiscal year 2015. The Company recognized a number of discrete income tax items during fiscal year 2015. In relation to its acquisition of Stealth in fiscal 2015, the Company recognized a discrete income tax benefit of $1.1 million for fiscal year 2015 in relation to the substantial reversal of a valuation allowance previously established against its Canadian net operating loss carryforwards. Additional discrete items include return to provision adjustments, certain jurisdictional audit adjustments and changes in state apportionment factors in relation to the Company's acquisitions during the current fiscal year. Excluding these discrete tax items, the Company recorded income tax expense of $5.3 million, or 35.6%, of income before income taxes, for fiscal year 2015. See Note 9, Income Taxes, of the “Notes to Consolidated Financial Statements” in this Form 10-K for a further discussion of income taxes.
Due to the factors described above, the Company reported net income of $11.0 million ($1.10 per share, basic and diluted) for fiscal year 2015, compared to net income of $13.0 million ($1.28 per share, basic and diluted) for the corresponding period last year.

28

Table of Contents

MDS
The following table presents selected consolidated statements of income data (dollars in thousands):
 
For fiscal years
 
2015
 
% of Sales
 
2014
 
% of Sales
 
$ Chg
 
% Chg
Net sales:
 
 
 
 
 
 
 
 
 
 
 
Legacy business
$
184,159

 
69.8
%
 
$
215,787

 
87.7
%
 
$
(31,628
)
 
(14.7
)%
Acquired business
62,025

 
23.5

 
11,673

 
4.7

 
50,352

 

Intercompany
17,756

 
6.7

 
18,669

 
7.6

 
(913
)
 
(4.9
)
   Total net sales
263,940

 
100.0

 
246,129

 
100.0

 
17,811

 
7.2

Gross Profit
36,461

 
13.8

 
34,782

 
14.1

 
1,679

 
4.8

Selling and administrative expenses
18,615

 
7.1

 
14,449

 
5.9

 
4,166

 
28.8

Amortization of intangible assets
5,811

 
2.2

 
3,116

 
1.2

 
2,695

 
86.5

Legal settlement
2,500

 
0.9

 

 

 
2,500

 

Restructuring charges

 

 
188

 
0.1

 
(188
)
 
(100.0
)
Operating income
$
9,535

 
3.6
%
 
$
17,029

 
6.9
%
 
$
(7,494
)
 
(44.0
)%
MDS legacy business sales reflect sales from MDS facilities that were owned for both the entire fiscal years of 2015 and 2014. MDS acquisition sales relate to the acquisitions of Hunter, RTEmd and eMT in fiscal 2015 and the acquisitions of Aubrey and Beckwood in fiscal 2014. The comparative decrease in legacy business sales primarily reflects an insourcing by the MDS segment's largest customer, Fenwal Blood Technologies ("Fenwal"), of certain program engagements with the Company (the "Fenwal rebalancing") that occurred in the second half of fiscal 2014. Fenwal contributed 14% and 20% of MDS segment net sales and 10% and 14% of consolidated company net sales during the fiscal years 2015 and 2014, respectively. The lost Fenwal programs resulted in a reduction of sales of $19.0 million in fiscal 2015 compared to fiscal 2014, but were partially offset by a $6.8 million increase in sales in retained programs. The remaining segment decrease reflects fluctuations in customer demand due to program cancellations, governmental funding and customer design related delays. MDS backlog was $170.1 million at June 30, 2015 compared to $114.7 million at June 30, 2014. Commercial orders, in general, may be rescheduled or canceled without significant penalty, as a result, may not be a meaningful measure of future sales. A majority of the June 30, 2015 MDS backlog is currently expected to be realized in the next 12 months.
The decrease in gross margin percentage on MDS sales primarily reflects the effect of fixed overhead costs on lower legacy business sales. The selling and administrative expense increase is primarily comprised of incremental direct and allocated expenses related to the Hunter, RTEmd, eMT, Aubrey and Beckwood operations.
The increase in amortization of intangible assets relates to the amortization of customer relationships and non-compete agreements acquired as part of the fiscal 2015 Hunter transaction, customer relationships acquired as part of the fiscal 2015 RTE transaction, customer relationships, non-compete agreements and trade names acquired as part of the fiscal 2015 eMT transaction, non-compete agreements acquired as part of the fiscal 2014 Aubrey transaction and customer relationships and non-compete agreements acquired as part of the fiscal 2014 Beckwood transaction.

29

Table of Contents

ECP
The following table presents selected consolidated statements of income data (dollars in thousands):
 
For fiscal years
 
2015
 
% of Sales
 
2014
 
% of Sales
 
$ Chg
 
% Chg
Net sales:
 
 
 
 
 
 
 
 
 
 
 
Legacy business
$
113,804

 
83.5
%
 
$
94,787

 
86.8
%
 
$
19,017

 
20.1
%
Acquired business
22,137

 
16.2

 
14,254

 
13.1

 
7,883

 
55.3

Intercompany
374

 
0.3

 
93

 
0.1

 
281

 
N/A
   Total net sales
136,315

 
100.0

 
109,134

 
100.0

 
27,181

 
24.9

Gross profit
38,353

 
28.1

 
30,168

 
27.6

 
8,185

 
27.1

Selling and administrative expenses
11,038

 
8.1

 
8,750

 
7.9

 
2,288

 
26.1

Internal research and development expenses
1,502

 
1.1

 
1,169

 
1.1

 
333

 
28.5

Amortization of intangible assets
780

 
0.5

 
306

 
0.3

 
474

 
154.9

Operating income
$
25,033

 
18.4
%
 
$
19,943

 
18.3
%
 
$
5,090

 
25.5
%
ECP legacy business sales reflect sales from ECP facilities that were owned for both the entire fiscal years of 2015 and 2014 as well as sales in fiscal 2015 relating to KEP, Argotec and IED as sales relating to these tuck-in acquisitions were not considered material for separate presentation. ECP acquisition sales relate to the acquisitions of Stealth, IED and KEP in fiscal 2015 and Aydin during the first quarter of fiscal 2014. The increase in ECP legacy business sales primarily reflects increased sonobuoy sales to the U.S. Navy as well as increased U.S. Navy engineering sales, partially offset by decreased sonobuoy sales to foreign governments that meet Department of State licensing requirements. Total sales to the U.S. Navy for the fiscal years 2015 and 2014 were $94.9 million and $63.2 million, respectively, which represented 25% and 19% of consolidated Company net sales for those periods. Sonobuoy sales to foreign governments were $15.3 million and $29.7 million for the fiscal years 2015 and 2014, respectively. ECP backlog was $143.3 million at June 30, 2015 compared to $32.4 million at June 30, 2014. A majority of the June 30, 2015 ECP backlog is currently expected to be realized in the next 18 months.
Gross profit percentage on ECP sales was positively affected in the current year by increased volume as compared to the prior year. The selling and administrative expense increase is primarily comprised of incremental direct and allocated expenses related to the Stealth and Aydin operations.
The increase in amortization of intangible assets relates to the amortization of customer relationships, non-compete agreements and trade names acquired as part of the fiscal 2015 Stealth transaction, customer relationships and trade names acquired as part of the fiscal 2015 KEP transaction and customer relationships and non-compete agreements acquired as part of the fiscal 2015 IED transaction.
Internal research and development expenses reflect costs incurred for the internal development of technologies for use in undersea warfare, navigation, hand held targeting applications as well as rugged computer and display devices. These costs include salaries and related expenses, contract labor and consulting costs, materials and the cost of certain research and development specific equipment.
Eliminations and Corporate Unallocated
The following table presents selected consolidated statements of income data (dollars in thousands):
 
For fiscal years
 
2015
 
2014
 
$ Chg
 
% Chg
Intercompany sales eliminations
$
(18,130
)
 
$
(18,762
)
 
$
632

 
(3.4
)%
Selling and administrative expenses unallocated
17,316

 
12,483

 
4,833

 
38.7

Total corporate selling and administrative expenses before allocation to operating segments were $27.0 million and $20.9 million for the fiscal years 2015 and 2014, respectively, or 7.1% and 6.2% of consolidated sales, respectively, reflecting certain fiscal year 2015 increased costs in relation to consummated acquisitions and acquisition targets the Company eventually declined to proceed with, including fiscal 2015 success-based finders fees in relation to the eMT and IED acquisitions. The period over period comparative additionally reflected certain increased costs in the fiscal 2015 period in anticipation of future growth, including costs in relation to a reorganization of the Company's finance organization. Of these costs, $9.6 million and

30

Table of Contents

$8.4 million, respectively, were allocated to segment operations in each of these periods. Allocations of corporate selling and administrative expenses are based on the nature of the service provided and can fluctuate from period to period.
Liquidity and Capital Resources
As of July 3, 2016, the Company had $76.9 million available under its $175.0 million credit facility, reflecting borrowings of $97.2 million and certain letters of credit outstanding of $0.9 million. Additionally, the Company had available cash and cash equivalents of $0.1 million.
On September 11, 2014, the Company replaced its previous credit facility with a new $200.0 million revolving line-of-credit facility with a group of banks (the “Credit Facility”) to fund future acquisitions and to support the Company’s working capital needs and other general corporate purposes. On April 13, 2015, the Company amended the Credit Facility to increase the size of the revolving line-of-credit facility by $75.0 million to $275.0 million, reload uncommitted loans under the agreement and to make other sublimit and definitional changes. The Company has the right to request an increase of the facility in an amount of up to $100.0 million. The facility is secured by substantially all assets of the Company and its subsidiaries and expires on September 11, 2019.
On June 27, 2016, the Company entered into Amendment No. 3 (“Amendment 3”) to the Credit Facility. As a result of Amendment 3, the Company reduced the revolving credit facility from $275.0 million to $175.0 million, reduced the optional increase in the Credit Facility from $100.0 million to $50.0 million, increased the permitted total funded debt to EBITDA ratio through the fiscal quarter ending September 2017, and provided for certain restrictions on business acquisitions, dividends and stock repurchases. Payments of $0.7 million related to Amendment 3 were recorded as deferred financing costs in other long-term assets.
Outstanding borrowings under the Credit Facility will bear interest, at the Company’s option, at either LIBOR, fixed for interest periods of one, two, three or six month periods, plus 1.00% to 3.00%, or at the bank’s base rate, as defined, plus 0.00% to 2.00%, based upon the Company’s Total Funded Debt/EBITDA Ratio, as defined. The Company is also required to pay commitment fees on unused portions of the Credit Facility ranging from 0.20% to 0.50%, based on the Company’s Total Funded Debt/EBITDA Ratio, as defined. The Credit Facility includes representations, covenants and events of default that are customary for financing transactions of this nature.
As a condition of the Credit Facility, the Company is subject to certain customary covenants, with which it was in compliance with at July 3, 2016.

Certain of the Company's ECP contracts with the U.S. Navy allow for billings to occur when certain milestones under the applicable program are reached, independent of the amount shipped by Sparton as of such date. These performance based billings reduce the amount of cash that would otherwise be required during the performance of these contracts. As of July 3, 2016 and June 30, 2015, $0.0 million and $1.8 million, respectively, of proceeds from billings in excess of costs were received and were reported in the Consolidated Balance Sheets as other accrued expenses.

The Company currently expects to meet its liquidity needs through a combination of sources including, but not limited to, operations, existing cash balances, its revolving line-of-credit and anticipated continuation of performance based billings on certain ECP contracts. With the above sources providing the expected cash flows, the Company currently believes that it will have sufficient liquidity for its anticipated needs over the next 12 months, but no assurances regarding liquidity can be made.
A portion of our operating income is earned outside of the United States. Earnings in Vietnam are deemed to be indefinitely reinvested in foreign jurisdictions while earnings in Canada are not deemed to be indefinitely reinvested. We currently do not intend or foresee a need to repatriate these funds from jurisdictions for which we assert indefinite reinvestment. We expect existing domestic cash and short-term investments and cash flows of operations to continue to be sufficient to fund our domestic operating activities and cash commitments for investing and financing activities, such as dividends, debt repayment, capital expenditures, for at least the next 12 months and thereafter for the foreseeable future. The Company has recorded $0.0 million liability related to Canada earnings as that entity has not had positive cumulative earnings and profits.

31

Table of Contents

 
For fiscal years
CASH FLOWS
2016
 
2015
 
2014
Operating activities, excluding changes in working capital
$
22,084

 
$
26,161

 
$
26,051

Net changes in working capital
26,048

 
(21,624
)
 
(13,600
)
Operating activities
48,132

 
4,537

 
12,451

Investing activities
(4,842
)
 
(104,107
)
 
(38,992
)
Financing activities
(58,072
)
 
106,456

 
28,484

Cash flows from operating activities, excluding changes in working capital, for fiscal years 2016, 2015 and 2014 reflect the Company's relative operating performance during those periods. Goodwill impairment, net loss and deferred income taxes, as well as depreciation and amortization, had the most significant impact on cash flows from operating activities excluding changes in working capital. Fiscal year 2016 working capital related cash flows primarily reflect increased accounts receivable as well as a decrease in accounts payable. Fiscal year 2015 working capital related cash flows primarily reflect increased accounts receivable as well as a decrease in accounts payable and to a lesser degree, a decrease in advanced funding of production related to U.S. Navy contracts during the year in excess of performance based payments received. Working capital related cash flows for fiscal year 2014 primarily reflect a decrease in advanced funding of production related to U.S. Navy contracts during the year in excess of performance based payments received and to a lesser degree, a decrease in accrued expenses, partially offset by decreased receivables and inventories.

Cash flows from investing activities in fiscal year 2016 reflects a sale of marketable equity securities as well as cash received in relation to a 2015 acquisition. Fiscal year 2015 reflects a $97.3 million use of cash for the acquisitions of Hunter, eMT, Stealth, KEP Marine, IED, RTEmd and Argotec, net of acquired cash and net of a working capital adjustment receipt relating to the fiscal year 2014 acquisition of Aubrey. Fiscal year 2015 also reflects a $1.0 million purchase of marketable equity securities. Fiscal year 2014 reflects a $35.6 million use of cash for the acquisitions of Aydin, Beckwood and Aubrey, net of acquired cash. The Aydin and Aubrey acquisitions were subject to certain post-closing adjustments. The Aydin and Aubrey acquisitions were funded through borrowings under the Company’s Credit Facility. The Beckwood acquisition was funded through a combination of cash on hand and borrowings under the Company's Credit Facility. Net capital expenditures for fiscal years 2016, 2015 and 2014 were $6.1 million, $5.8 million and $3.5 million, respectively. Proceeds from the sale of property, plant and equipment were $0.2 million in fiscal year 2016, none in fiscal year 2015 and $0.1 million in fiscal year 2014.
Cash flows from financing activities in fiscal year 2016 reflects $57.3 million of net repayments under the Company's Credit Facility and the payment of $0.7 million of debt financing costs. Fiscal year 2015 reflects $113.5 million of net borrowings under the Company's Credit Facility, the repurchase of $5.0 million of the Company's common stock under the Company's stock repurchase programs (see below for a discussion of the Company's authorized stock repurchase programs), $1.8 million of payments to satisfy income tax withholding requirements in relation to the vesting of executives' restricted stock in exchange for the surrender of a portion of the vesting shares, the payment of $1.4 million of debt financing costs and $1.0 million of tax benefits in excess of recorded stock based compensation. Fiscal year 2014 reflects $31.0 million of net borrowing under the Company's Credit Facility and includes the $1.6 million redemption of the Company's remaining Industrial Revenue Bonds. Fiscal year 2014 also reflects the repurchase of $0.9 million of the Company's common stock under Company's stock repurchase programs, $0.7 million of payments to satisfy income tax withholding requirements in relation to the vesting of executives' restricted stock in exchange for the surrender of a portion of the vesting shares and $0.5 million of tax benefits in excess of recorded stock-based compensation. The Company received $0.2 million and $0.1 million from the exercise of stock options during fiscal years 2015 and 2014, respectively. There were no stock options exercised in fiscal year 2016.
On October 22, 2014, the Company’s Board of Directors approved a repurchase by the Company of up to $5.0 million of shares of its common stock. The Company was authorized to purchase shares from time to time in open market, block and privately negotiated transactions. The stock repurchase program did not require the Company to repurchase any specific number of shares. Pursuant to this stock repurchase program, during fiscal year 2015, the Company purchased 181,278 shares of its common stock at an average price of $27.55 per share for $5.0 million, which completed the repurchase program.
Commitments and Contingencies
See Note 11, Commitments and Contingencies, of the “Notes to Consolidated Financial Statements” in this Form 10-K.

32

Table of Contents

Contractual Obligations
Future minimum contractual cash obligations for the next five years and in the aggregate at July 3, 2016, are as follows (in thousands):
 
Payments Due By Period
 
Total
 
Less than
1 Year
 
2-3 Years
 
4-5 Years
 
More than
5 Years
Contractual obligations:
 
 
 
 
 
 
 
 
 
Debt
$
97,206

 
$

 
$

 
$
97,206

 
$

Cash interest (1)
10,912

 
3,401

 
6,802

 
709

 

Operating leases (2)
9,777

 
2,529

 
3,526

 
2,084

 
1,638

Environmental liabilities
6,692

 
584

 
956

 
768

 
4,384

Non-cancelable purchase orders
48,999

 
48,999

 

 

 

Total
$
173,586

 
$
55,513

 
$
11,284

 
$
100,767

 
$
6,022

 
(1)
Cash interest reflects interest payments on the Company's Credit Facility discussed below. The effective interest rate on the outstanding borrowing under the credit facility was 3.50% at July 3, 2016.
(2)
Does not include payments due under future renewals to the original lease terms.
The Company's other non-current liabilities in the consolidated balance sheets include unrecognized tax benefits and related interest and penalties. As of July 3, 2016, we had gross unrecognized tax benefits of $0.1 million and with no additional amount for interest and penalties classified as non-current liabilities. At this time, we are unable to make a reasonably reliable estimate of the timing of payments in individual years in connection with these tax liabilities; therefore, such amounts are not included in the above contractual obligation table.
Debt — Debt consists of amounts owed under the Company's Credit Facility. See Note 8, Debt, of the “Notes to Consolidated Financial Statements” in this Form 10-K for a summary of the Company's banking arrangements.
Operating leases — See Note 11, Commitments and Contingencies, of the “Notes to Consolidated Financial Statements” in this Form 10-K for discussion of operating leases.
Environmental liabilities — See Note 11, Commitments and Contingencies, of the “Notes to Consolidated Financial Statements” in this Form 10-K for a description of the accrual for environmental remediation. Of the $6.7 million total, $0.6 million is classified as a current liability and $6.1 million is classified as a long-term liability, both of which are included on the balance sheet as of July 3, 2016.
Non-cancelable purchase orders — Binding orders the Company has placed with suppliers that are subject to quality and performance requirements.
Off-Balance Sheet Arrangements
The Company has standby letters of credit outstanding of $0.9 million at July 3, 2016, principally to support an operating lease agreement. Other than these standby letters of credit and the operating lease commitments included above, we have no off-balance sheet arrangements that would have a current or future material effect on our financial condition, changes in financial condition, revenue, expense, results of operations, liquidity, capital expenditures or capital resources.
Inflation
We believe that inflation has not had a significant impact in the past and is not likely to have a significant impact in the foreseeable future on our results of operations.

33

Table of Contents

CRITICAL ACCOUNTING POLICIES AND ESTIMATES
The preparation of our consolidated financial statements in conformity with accounting principles generally accepted in the United States of America (“GAAP”) requires management to make estimates, judgments and assumptions that affect the amounts reported as assets, liabilities, revenues and expenses and related disclosure of contingent assets and liabilities. Estimates are regularly evaluated and are based on historical experience and on various other assumptions believed to be reasonable under the circumstances. Actual results could differ from those estimates. In many cases, the accounting treatment of a particular transaction is specifically dictated by GAAP and does not require management’s judgment in application. There are also areas in which management’s judgment in selecting among available alternatives would not produce a materially different result. See Note 2, Summary of Significant Accounting Policies, of the "Notes to Consolidated Financial Statements" in this Form 10-K for a further discussion of significant accounting policies. Senior management has reviewed these critical accounting policies and related disclosures with the audit committee of Sparton’s Board of Directors.
Environmental Contingencies
Sparton has been involved with ongoing environmental remediation since the early 1980’s related to one of its former manufacturing facilities, located in Albuquerque, New Mexico (“Coors Road”). Although the Company entered into a long-term lease of the Coors Road property that was accounted for as a sale of property during fiscal year 2010, it remains responsible for the remediation obligations related to its past operation of this facility. During the fourth quarter of each fiscal year, Sparton performs a review of its remediation plan, which includes remediation methods currently in use, desired outcomes, progress to date, anticipated progress and estimated costs to complete the remediation plan by fiscal year 2030, following the terms of a March 2000 Consent Decree. The Company’s minimum cost estimate is based upon existing technology and excludes certain legal costs, which are expensed as incurred. The Company’s estimate includes equipment and operating and maintenance costs for onsite and offsite pump and treat containment systems, as well as continued onsite and offsite monitoring. It also includes periodic reporting requirements. The review performed in the fourth quarters of fiscal years 2016 and 2015 did not result in changes to the related liability. During the 2014 review, the Company found: additional concentrations of contaminants on-site that required clean-up actions previously not included within the remediation plan; progress to date on the removal of certain other on-site contaminants was taking place slower than previously anticipated; and that certain efficiencies regarding periodic reporting were not being realized as had been previously anticipated. The discovery of additional on-site contaminants, slower than expected removal rates of other on-site contaminants and continued high periodic reporting costs added significant additional costs to the remediation project that are expected to continue for a number of years. As a result, the remaining estimated minimum future undiscounted costs of this financial liability increased to $8.2 million at June 30, 2014, thereby requiring a $4.2 million non-cash charge against operations in the fourth quarter of fiscal year 2014. As of July 3, 2016 and June 30, 2015, Sparton has accrued $6.7 million and $7.8 million, respectively, as its estimate of the remaining minimum future undiscounted financial liability with respect to this matter, of which $0.6 million and $0.7 million was classified as a current liability and included on the balance sheet in other accrued expenses.
In fiscal year 2003, Sparton reached an agreement with the United States Department of Energy (“DOE”) and others to recover certain remediation costs. Under the settlement terms, Sparton received cash and obtained some degree of risk protection as the DOE agreed to reimburse Sparton for 37.5% of certain future environmental expenses in excess of $8.4 million incurred from the date of settlement, of which $6.5 million has been expended as of July 3, 2016 toward the $8.4 million threshold. It is expected that the DOE reimbursements will commence in the years after fiscal year 2019. At July 3, 2016 and June 30, 2015, the Company recognized $1.6 million and $1.8 million, respectively, in long-term assets in relation to these expected reimbursements and is considered collectible. The DOE receivables of $1.6 million at July 3, 2016 and the $1.8 million at June 30, 2015 are included in other non-current assets on the balance sheet. Uncertainties associated with environmental remediation contingencies are pervasive and often result in wide ranges of reasonably possible outcomes. Estimates developed in the early stages of remediation can vary significantly. Normally a finite estimate of cost does not become fixed and determinable at a specific point in time. Rather, the costs associated with environmental remediation become estimable over a continuum of events and activities that help to frame and define a liability. Factors which cause uncertainties for the Company include, but are not limited to, the effectiveness of the current work plans in achieving targeted results and proposals of regulatory agencies for desired methods and outcomes. It is possible that cash flows and results of operations could be materially affected by the impact of changes associated with the ultimate resolution of this contingency. At July 3, 2016, the Company estimates that it is reasonably possible, but not probable, that future environmental remediation costs associated with the Company’s past operations at the Coors Road property, in excess of amounts already recorded, could be up to $2.7 million before income taxes over the next fourteen years, with this amount expected to be offset by related reimbursement from the DOE for a net amount of $1.0 million.
The Company and its subsidiaries are also involved in certain existing compliance issues with the EPA and various state agencies, including being named as a potentially responsible party at several sites. Potentially responsible parties ("PRPs") can be held jointly and severally liable for the clean-up costs at any specific site. The Company’s past experience, however, has

34

Table of Contents

indicated that when it has contributed relatively small amounts of materials or waste to a specific site relative to other PRPs, its ultimate share of any clean-up costs has been minor. Based upon available information, the Company believes it has contributed only small amounts to those sites in which it is currently viewed as a PRP and that reasonably possible losses related to these compliance issues are immaterial.
Percentage-of-Completion Accounting
In the first quarter of fiscal year 2014, the Company voluntarily changed its revenue recognition policy related to ECP sonobuoy sales to the U.S. Navy and foreign government customers under long-term contracts that require lot acceptance testing. The new policy continues to recognize revenue under the percentage of completion method, but changes the measurement of progress under these contracts from a completed units accepted basis (whereby revenue was recognized for each lot of sonobuoys produced when that lot was formally accepted by the customer) to a units-of-production basis (whereby revenue is recognized when production and internal testing of each lot of sonobuoys is completed). The Company now has significant experience in producing sonobuoys to customer specifications and internal testing to assess compliance with those specifications and, as such, now has an adequate history of continuous customer acceptance of all sonobuoys produced. Accordingly, the Company believes the new method is preferable primarily because it eliminates delays in revenue and related cost of goods sold recognition due to timing of customer testing and acceptance delays. Such delays commonly occur due to customer circumstances that are unrelated to the product produced. Under the new policy, the revenue and related costs of goods sold of these manufactured sonobuoy lots will more closely match the period in which the product was produced and the related revenue earned, thereby better reflecting the economic activity of the ECP segment. Additionally, this new method provides better matching of periodic operating expenses incurred during production. The Company additionally has certain other long-term contracts that are accounted for under the percentage-of-completion method of accounting, whereby contract revenues are recognized on a pro-rata basis based upon the ratio of costs incurred compared to total estimated contract costs. Contract costs include labor and material placed into production, as well as allocation of indirect costs.
Losses for the entire amount of long-term contracts are recognized in the period when such losses are determinable. Significant judgment is exercised in determining estimated total contract costs including, but not limited to, cost experience to date, estimated length of time to contract completion, costs for materials, production labor and support services to be expended and known issues on remaining units to be completed. In addition, estimated total contract costs can be significantly affected by changing test routines and procedures, resulting design modifications and production rework from these changing test routines and procedures and limited range access for testing these design modifications and rework solutions. Estimated costs developed in the early stages of contracts can change, sometimes significantly, as the contracts progress and events and activities take place. Changes in estimates can also occur when new designs are initially placed into production. The Company formally reviews its costs incurred-to-date and estimated costs to complete on all significant contracts at least quarterly and revised estimated total contract costs are reflected in the financial statements. Depending upon the circumstances, it is possible that the Company’s financial position, results of operations and cash flows could be materially affected by changes in estimated costs to complete one or more significant government contracts.
Commercial Inventory Valuation
Valuation of commercial customer inventories requires a significant degree of judgment. These valuations are influenced by the Company’s experience to date with both customers and other markets, prevailing market conditions for raw materials, contractual terms and customers’ ability to satisfy these obligations, environmental or technological materials obsolescence, changes in demand for customer products and other factors resulting in acquiring materials in excess of customer product demand. Contracts with some commercial customers may be based upon estimated quantities of product manufactured for shipment over estimated time periods. Raw material inventories are purchased to fulfill these customer requirements. Within these arrangements, customer demand for products frequently changes, sometimes creating excess and obsolete inventories.
The Company regularly reviews raw material inventories by customer for both excess and obsolete quantities. Wherever possible, the Company attempts to recover its full cost of excess and obsolete inventories from customers or, in some cases, through other markets. When it is determined that the Company’s carrying cost of such excess and obsolete inventories cannot be recovered in full, a charge is taken against income for the difference between the carrying cost and the estimated realizable amount. These cost adjustments for excess and obsolete inventory create a new cost basis for the inventory. The Company recorded inventory write-downs totaling $1.7 million, $0.9 million and $0.5 million for fiscal years 2016, 2015 and 2014, respectively. These charges are included in cost of goods sold for the periods presented. If inventory that has previously been impaired is subsequently sold, the amount of reduced cost basis is reflected as cost of goods sold. The Company experienced minimal subsequent sales of excess and obsolete inventory during fiscal years 2016, 2015 and 2014 that resulted in higher gross margins due to previous write-downs. Such sales and the impact of those sales on gross margin were not material to the years presented. If assumptions the Company has used to value its inventory deteriorate in the future, additional write-downs may be required.

35

Table of Contents

Allowance for Probable Losses on Receivables
The accounts receivable balance is recorded net of allowances for amounts not expected to be collected from customers. The allowance is estimated based on historical experience of write-offs, the level of past due amounts, information known about specific customers with respect to their ability to make payments and future expectations of conditions that might impact the collectability of accounts. Accounts receivable are generally due under normal trade terms for the industry. Credit is granted and credit evaluations are periodically performed, based on a customer’s financial condition and other factors. Although the Company does not generally require collateral, cash in advance or letters of credit may be required from customers in certain circumstances, including some foreign customers. When management determines that it is probable that an account will not be collected, it is charged against the allowance for probable losses. The Company reviews the adequacy of its allowance monthly. The allowance for doubtful accounts considered necessary was $0.4 million and $0.2 million at July 3, 2016 and June 30, 2015, respectively. If the financial condition of customers were to deteriorate, resulting in an impairment of their ability to make payment, additional allowances may be required. Given the Company’s significant balance of government receivables and in some cases letters of credit from foreign customers, collection risk is considered minimal. Historically, uncollectible accounts have generally been insignificant, have generally not exceeded management’s expectations and the allowance is deemed adequate.
Pension Obligations
The Company calculates the cost of providing pension benefits under the provisions of FASB Accounting Standards Codification (“ASC”) Topic 715, “Compensation — Retirement Benefits”, (“ASC Topic 715”). The key assumptions required within the provisions of ASC Topic 715 are used in making these calculations. The most significant of these assumptions are the discount rate used to value the future obligations and the expected return on pension plan assets. The discount rate is consistent with market interest rates on high-quality, fixed income investments. The expected return on assets is based on long-term returns and assets held by the plan, which is influenced by historical averages. If actual interest rates and returns on plan assets materially differ from the assumptions, future adjustments to the financial statements would be required. While changes in these assumptions can have a significant effect on the pension benefit obligation and the unrecognized gain or loss accounts disclosed in the Notes to Consolidated Financial Statements, the effect of changes in these assumptions is not expected to have the same relative effect on net periodic pension expense in the near term. While these assumptions may change in the future based on changes in long-term interest rates and market conditions, there are no known expected changes in these assumptions as of July 3, 2016. As indicated above, to the extent the assumptions differ from actual results, there would be a future impact on the financial statements. The extent to which this will result in future expense is not determinable at this time as it will depend upon a number of variables, including trends in interest rates and the actual return on plan assets. The annual actuarial valuation of the pension plan is completed at the end of each fiscal year. Based on these valuations, net periodic pension expense (income) for fiscal years 2016, 2015 and 2014 was calculated to be $0.3 million, $(0.2) million and $0.0 million, respectively.
Effective April 1, 2009, participation and the accrual of benefits in the Company’s pension plan were frozen, at which time all participants became fully vested and all remaining prior service costs were recognized. Lump-sum benefit distributions during fiscal years 2016 and 2014 exceeded plan service and interest costs, resulting in lump-sum settlement charges of $0.3 million and $0.1 million also being recognized during the respective years. See Note 10, Employee Retirement Benefit Plans, of the “Notes to Consolidated Financial Statements” in this Form 10-K for detail regarding the components of net periodic pension expense.
Business Combinations
The Company accounts for business combinations under the acquisition method of accounting in accordance with ASC Topic 805, “Business Combinations”. Accordingly, the Company recognizes amounts for identifiable assets acquired and liabilities assumed equal to their estimated acquisition date fair values. Transaction and integration costs associated with business combinations are expensed as incurred. Any excess of the acquisition price over the estimated fair value of net assets acquired is recorded as goodwill while any excess of the estimated fair value of net assets acquired over the acquisition price is recorded in current earnings as a gain.
The Company makes various assumptions in estimating the fair values of assets acquired and liabilities assumed. As fair value is a market-based measurement, it is determined based on the assumptions that market participants would use. The most significant assumptions typically relate to the estimated fair values of inventory and intangible assets, including customer lists and non-compete agreements. Management arrives at estimates of fair value based upon assumptions it believes to be reasonable. These estimates are based on historical experience and information obtained from the management of the acquired business and is inherently uncertain. Critical estimates in valuing certain intangible assets include but are not limited to: future expected discounted cash flows from customer relationships and contracts assuming similar product platforms and completed projects; the acquired company’s market position, as well as assumptions about the period of time the acquired customer relationships will continue to generate revenue streams; and attrition and discount rates. Unanticipated events and

36

Table of Contents

circumstances may occur which may affect the accuracy or validity of such assumptions, estimates or actual results, particularly with respect to amortization periods assigned to identifiable intangible assets.
Valuation of Property, Plant and Equipment
The Company records an impairment charge on our investment in property, plant and equipment that we hold and use in our operations if and when management determines that the related carrying values may not be recoverable. If one or more impairment indicators are deemed to exist, Sparton will measure any impairment of these assets based on current independent appraisals or a projected discounted cash flow analysis using a discount rate determined by management to be commensurate with the risk inherent in our business model. Our estimates of cash flows require significant judgment based on our historical and anticipated operating results and are subject to many factors.
Goodwill
Goodwill resulting from business combinations represents the excess of purchase price over the fair value of the net assets of the businesses acquired. Goodwill is not amortized, but rather tested for impairment annually, as well as whenever there are events or changes in circumstances (triggering events) which suggest that the carrying value of goodwill may not be recoverable. The Company performs its annual goodwill impairment testing in the fourth quarter based on its historical financial results through the third quarter end. The goodwill impairment test is performed at the reporting unit level, which is the lowest level at which goodwill is evaluated for management purposes. The Company has identified reporting units to be its two reportable business segments - MDS and ECP for fiscal years 2016 and 2015. In fiscal year 2014 the Company had three reportable business segments determined to be its identified reporting units - Medical, Complex Systems and DSS.

The Company may elect to perform a qualitative assessment for its annual goodwill impairment test. If the qualitative assessment indicates that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, or if Sparton elects to not perform a qualitative assessment, then the Company would be required to perform a quantitative impairment test for goodwill.

The quantitative impairment analysis is a two-step process. First, the Company determines the fair value of the reporting unit and compares it to its carrying value. The fair value of reporting units is determined based on a weighting of both projected discounted future results and comparative market multiples. The projected discounted future results (discounted cash flow approach) is based on assumptions that are consistent with the Company’s estimates of future growth and the strategic plan used to manage the underlying business. Factors requiring significant judgment include assumptions related to future revenue growth rates, operating margins, terminal growth rates and discount factors, amongst other considerations. If the carrying value of the reporting unit exceeds the fair value in the first step, a second step is performed to measure the amount of an impairment loss. In the second step, an impairment loss is recognized for any excess of the carrying value of the reporting unit’s goodwill over its implied fair value. The implied fair value of goodwill is determined by allocating the fair value of the reporting unit using a residual fair value allocation. The residual fair value allocated to goodwill is the implied fair value of the reporting unit’s goodwill. The Company’s fair value estimates related to its goodwill impairment analyses are based on Level 3 inputs within the fair value hierarchy as described in Note 2, Summary of Significant Accounting Policies, Fair value measurements, of the "Notes to Consolidated Financial Statements" in this Form 10-K. Determining the fair value of any reporting unit and intangible asset is judgmental in nature and involves the use of significant estimates and assumptions. The Company bases its fair value estimates on assumptions believed to be reasonable, but which are unpredictable and inherently uncertain. Actual future results may differ from those estimates. Circumstances that may lead to future impairment of goodwill include, but are not limited to, unforeseen decreases in future performance or industry demand, a further loss of a significant customer or the inability to achieve sufficient organic revenue growth to offset fluctuations in customer demand.

The Company's fiscal year 2014 quantitative annual tests of goodwill (Step 1) related to the Medical, Complex Systems and DSS reporting units resulted in fair values in excess of the related carrying values of the assets and as such did not indicate that the related goodwill was impaired. The Company determined at that time that the fair value of the three reporting units substantially exceeded their carrying values by 70%, 33% and over 1,100%, respectively. In fiscal 2015, the Company elected to perform the optional qualitative assessment of goodwill and concluded that it was more likely than not that the fair value of goodwill in its reporting units was in excess of its respective carrying amount and therefore, no further testing was required. In fiscal 2016, the Step 1 impairment testing of goodwill was performed and resulted in the carrying values of its MDS reporting unit in excess of its fair value indicating potential impairment. The decline in value in the MDS reporting unit was a result of the underperformance of the Company’s most recent acquisition (Hunter Technology Corporation), and the inability to achieve sufficient organic growth to offset the loss of a large customer due to insourcing, as well as revenue declines due to fluctuations in customer demand across the MDS reporting unit. The Company performed the Step 2 analysis of goodwill impairment for this reporting unit and based on the valuation of the reporting unit as well as the fair value of the reporting unit's individual tangible and intangible assets, it was determined that goodwill within this reporting unit was fully impaired. As such, the

37

Table of Contents

Company recorded an impairment of goodwill charge of $64.2 million. Prior to the fourth quarter of fiscal 2016, no triggering events or other facts and circumstances were identified that indicated that it was more likely than not that the fair value of the MDS segment was less than its carrying value. The impairment recognized in the fourth quarter of fiscal 2016 was a result of the continued underperformance of the acquired Hunter Technology Corporation operations and the inability of the Company to achieve sufficient organic revenue growth to offset fluctuations in customer demands. The fair value of the Company’s ECP reporting unit was in excess of its carrying value and, as such, indicated no impairment of goodwill.
Other Intangible Assets
The Company’s intangible assets other than goodwill represent the values assigned to acquired customer relationships, acquired non-compete agreements, acquired trademarks/tradenames and acquired unpatented technology. At July 3, 2016, customer relationships and non-compete agreements totaling $27.6 million and $2.0 million, respectively, are included in the MDS segment, while customer relationships, non-compete agreements, trademarks/trade names and unpatented technology totaling $5.0 million, $0.2 million, $1.4 million and $0.7 million, respectively, are included in the ECP segment. The impairment test for these intangible assets is conducted when impairment indicators are present. The Company continually evaluates whether events or circumstances have occurred that would indicate the remaining estimated useful lives of its intangible assets warrant revision or that the remaining balance of such assets may not be recoverable. The Company uses an estimate of the related undiscounted cash flows over the remaining life of the asset in measuring whether the asset is recoverable. If the carrying amount of an asset exceeds its estimated undiscounted future cash flows, an impairment charge would be recognized for the amount that the carrying amount of the asset exceeds the fair value of the asset. The Company’s fair value estimates related to its intangible assets impairment analyses are based on Level 3 inputs within the fair value hierarchy as described in Note 2, Summary of Significant Accounting Policies, Fair value measurements, of the "Notes to Consolidated Financial Statements" in this Form 10-K. The Company had a third-party valuation of the recoverability of intangible assets performed in the fourth quarter of fiscal 2016 and it was determined that the assets were fully recoverable and no write-down of such assets was necessary.
Acquired customer relationships are being amortized using an accelerated methodology over periods of seven to fifteen years. Acquired non-compete agreements are being amortized on a straight-line basis over periods of two to five years as the ratable decline in value over time is most consistent with the contractual nature of these assets. Acquired trademarks/trade names are being amortized on a straight-line basis over periods of one to ten years and acquired unpatented technology is being amortized using an accelerated methodology over seven years.
Income Taxes
We recognize federal, state and foreign current tax liabilities or assets based on our estimate of taxes payable or refundable in the current fiscal year by tax jurisdiction. We also recognize federal, state and foreign deferred tax assets or liabilities, as appropriate, for our estimate of future tax effects attributable to temporary differences and carryforwards.
We recognize the tax benefit from an uncertain tax position only if it is more likely than not that the tax position will be sustained on examination by the taxing authorities, based on the technical merits of the position. The tax benefits recognized in the consolidated financial statements from such positions are measured based on the largest benefit that has a greater than fifty percent likelihood of being realized upon ultimate resolution. Management must also assess whether uncertain tax positions as filed could result in the recognition of a liability for possible interest and penalties if any. Our estimates are based on the information available to us at the time we prepare the income tax provisions. Our income tax returns are subject to audit by federal, state and local governments, generally years after the returns are filed. These returns could be subject to material adjustments or differing interpretations of the tax laws. We recognize interest and penalties related to unrecognized tax benefits on the income tax expense line in the accompanying consolidated statements of operations. Accrued interest and penalties are included on the related tax liability line in the consolidated balance sheets.
Our calculation of current and deferred tax assets and liabilities is based on certain estimates and judgments and involves dealing with uncertainties in the application of complex tax laws. Our estimates of current and deferred tax assets and liabilities may change based, in part, on added certainty or finality to an anticipated outcome, changes in accounting or tax laws in the United States and overseas, or changes in other facts or circumstances. In addition, we recognize liabilities for potential United States tax contingencies based on our estimate of whether, and the extent to which, additional taxes may be due. If we determine that payment of these amounts is unnecessary, or if the recorded tax liability is less than our current assessment, we may be required to recognize an income tax benefit, or additional income tax expense, respectively, in our consolidated financial statements.
In preparing our consolidated financial statements, management assesses the likelihood that our deferred tax assets will be realized from future taxable income. In evaluating our ability to recover our deferred income tax assets, management considers all available positive and negative evidence, including operating results, ongoing tax planning and forecasts of future

38

Table of Contents

taxable income on a jurisdiction by jurisdiction basis. A valuation allowance is established if we determine that it is more likely than not that some portion or all of the net deferred tax assets will not be realized.
Stock-Based Compensation
ASC Topic 718, “Share-Based Payment”, requires significant judgment and the use of estimates in the assumptions for the model used to value the share-based payment awards, including stock price volatility and expected option terms. In addition, expected forfeiture rates for the share-based awards must be estimated. Because of our small number of option grants during our history, we are limited in our historical experience to use as a basis for these assumptions. While we believe that the assumptions and judgments used in our estimates are reasonable, actual results may differ from these estimates under different assumptions or conditions.
New Accounting Pronouncements
In May 2014, the FASB issued Accounting Standards Update No. 2014-09 ("ASU 2014-09"), Revenue from Contracts with Customers, which amends guidance for revenue recognition. Under the new standard, revenue will be recognized when control of the promised goods or services is transferred to customers in an amount that reflects the consideration to which the Company expects to be entitled in exchange for those goods and services. The standard creates a five-step model that will generally require companies to use more judgment and make more estimates than under current guidance when considering the terms of contracts along with all relevant facts and circumstances. These include the identification of customer contracts and separating performance obligations, the determination of transaction price that potentially includes an estimate of variable consideration, allocating the transaction price to each separate performance obligation and recognizing revenue in line with the pattern of transfer. In August 2015, the FASB issued an amendment to defer the effective date for all entities by one year. The new standard will become effective for annual reporting periods beginning after December 15, 2017, including interim periods within that reporting period. Early adoption is permitted as of annual reporting periods beginning after December 15, 2016. Companies have the option of using either a full or modified retrospective approach in applying this standard. During fiscal 2016, the FASB issued three additional updates which further clarify the guidance provided in ASU 2014-09. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In April 2015, the FASB issued Accounting Standards Update No. 2015-03 ("ASU 2015-03"), Interest - Imputation of Interest (Subtopic 835-30): Simplifying the Presentation of Debt Issuance Costs. ASU 2015-03 changes the presentation of debt issuance costs for term debt in the balance sheet by requiring the debt issuance costs to be presented as a direct deduction from the related debt liability, rather than recorded as an asset. In August 2015, the FASB issued clarification to the guidance in ASU 2015-03 regarding presentation and subsequent measurement of debt issuance costs related to line-of-credit arrangements. The new standard provides clarification regarding costs to secure revolving lines of credit and indicates that the SEC staff would not object to an entity deferring and presenting costs associated with line-of-credit arrangements as an asset and subsequently amortizing the deferred debt issuance costs ratably over the term of the line-of-credit arrangement, regardless of whether there are any outstanding borrowings on the line-of-credit arrangement. The recognition and measurement guidance for debt issuance costs are not affected by the amendments in this update. The provisions of this ASU are effective for fiscal years, and interim periods within those years, beginning after December 15, 2015, although early adoption is permitted. When adopted, this guidance must be applied on a retrospective basis. The adoption of this guidance is not expected to have a significant impact on the Company's consolidated financial statements.
In April 2015, the FASB issued Accounting Standards Update No. 2015-04 (“ASU 2015-04”), Practical Expedient for the Measurement Date of an Employer’s Defined Benefit Obligation and Plan Assets. ASU 2015-04 provides a practical expedient that permits the entity to measure defined benefit plan assets and obligations using the month-end that is closest to the entity’s fiscal year-end when an entity’s fiscal year-end does not coincide with a month-end. ASU 2015-04 will be effective for fiscal years and interim periods beginning after December 15, 2015. ASU 2015-04 is required to be applied prospectively and early adoption is permitted. The Company adopted this guidance in fiscal year 2016. The adoption of this guidance did not have a significant impact on the Company’s consolidated financial statements.
In July 2015, the FASB issued Accounting Standards Update No. 2015-11 ("ASU 2015-11"), Simplifying the Measurement of Inventory. ASU 2015-11 clarifies that inventory should be held at the lower of cost or net realizable value. Net realizable value is defined as the estimated selling price, less the estimated costs to complete, dispose and transport such inventory. ASU 2015-11 will be effective for fiscal years and interim periods beginning after December 15, 2016. ASU 2015-11 is required to be applied prospectively and early adoption is permitted. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In November 2015, the FASB issued ASU No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes, which requires that all deferred tax assets and liabilities, along with any related valuation allowance, be classified as non-current in the balance sheet. As a result, each jurisdiction will now only have one net non-current deferred tax

39

Table of Contents

asset or liability. However, the new guidance does not change the existing requirement that only permits offsetting within a jurisdiction. Companies are still prohibited from offsetting deferred tax liabilities from one jurisdiction against deferred tax assets of another jurisdiction. The amendments in this accounting standard are effective for public companies for interim and annual reporting periods beginning after December 15, 2016, with early application permitted. The Company has applied the change in accounting as of July 3, 2016. As such, the amounts previously reported as current deferred tax assets and non-current deferred tax liabilities were decreased by $4.7 million and $0, respectively, and amounts previously reported as non-current deferred tax assets were increased by $4.7 million in the Consolidated Balance Sheet as of June 30, 2015. The change in accounting principle did not have an impact on the Company’s results of operations, cash flows or stockholders’ equity.
In February 2016, the FASB issued Accounting Standards Update No. 2016-02 (“ASU 2016-02”), Leases (Topic 842). ASU 2016-02 establishes a right-of-use (ROU) model that requires a lessee to record a ROU asset and a lease liability on the balance sheet for all leases with terms longer than 12 months. Leases will be classified as either finance or operating, with classification affecting the pattern of expense recognition in the income statement. ASU 2016-02 is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. A modified retrospective transition approach is required for capital leases and operating leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements, with certain practical expedients available. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In March 2016, the FASB issued Accounting Standards Update No. 2016-09 ("ASU 2016-09"), Compensation - Stock Compensation (Topic 718): Improvements to Employee Share-Based Payment Accounting. ASU 2016-09 will directly impact the tax administration of equity plans. ASU 2016-09 is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. Early adoption is permitted and any adjustments should be reflected as of the beginning of the fiscal year that includes that interim period. The Company elected to not early adopt this period and is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In June 2016, the FASB issued Accounting Standards Update No. 2016-13 ("ASU 2016-13"), Financial Instruments—Credit Losses (Topic 326). ASU 2016-13 requires the measurement of all expected credit losses for financial assets held at the reporting date based on historical experience, current conditions, and reasonable and supportable forecasts. ASU 2016-13 is effective for fiscal years beginning after December 15, 2019 and early adoption is permitted. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In August 2016, the FASB issued Accounting Standards Update No. 2016-15 ("ASU 2016-15"), Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments. ASU 2016-15 will make eight targeted changes to how cash receipts and cash payments are presented and classified in the statement of cash flows. ASU 2016-15 is effective for fiscal years beginning after December 15, 2017. The new standard will require adoption on a retrospective basis unless it is impracticable to apply, in which case it would be required to apply the amendments prospectively as of the earliest date practicable. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
The Company manufactures its products in the United States, Canada and Vietnam. Sales of the Company’s products are in the U.S. and foreign markets. The Company is subject to foreign currency exchange rate risk relating to intercompany activity and balances and to receipts from customers and payments to suppliers in foreign currencies. Adjustments related to the remeasurement of the Company's Canadian and Vietnamese financial statements into U.S. dollars are included in current earnings. As a result, the Company's financial results could be affected by factors such as changes in foreign currency exchange rates or economic conditions in the domestic and foreign markets in which the Company operates. However, minimal third party receivables and payables are denominated in foreign currencies and the related market risk exposure is considered to be immaterial.
The Company's revolving credit line, when drawn upon, is subject to future interest rate fluctuations which could potentially have a negative impact on cash flows of the Company. The Company had $97.2 million outstanding under its Credit Facility at July 3, 2016. A prospective increase of 100 basis points in the interest rate applicable to the Company's outstanding borrowings under its Credit Facility would result in an increase of $1.0 million in our annual interest expense. The Company is not party to any currency exchange or interest rate protection agreements as of July 3, 2016.
ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Our financial statements required by this item are submitted as a separate section of this Annual Report on Form 10-K. See “Index to Consolidated Financial Statements,” commencing on page F-1 hereof.

40

Table of Contents

ITEM 9.    CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE
None.
ITEM 9A.    CONTROLS AND PROCEDURES
Evaluation of Disclosure Controls and Procedures
Each of our Chief Executive Officer and Chief Financial Officer has evaluated the effectiveness of our disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities and Exchange Act of 1934) as of the end of the period covered by this Annual Report. Based on such evaluation, such officers have concluded that, as of the end of the period covered by this Annual Report, our disclosure controls and procedures are effective.
There have been no changes in our internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Securities and Exchange Act of 1934) during the quarter ended July 3, 2016 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

41

Table of Contents


Management Report on Internal Control over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Our internal control system was designed to provide reasonable assurance to our management and board of directors regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles.
Any internal control system, no matter how well designed, has inherent limitations and may not prevent or detect misstatements. Accordingly, even those systems determined to be effective can provide only reasonable assurance with respect to financial statement preparation and presentation.
Our management conducted an assessment of the effectiveness of our internal control over financial reporting as of July 3, 2016. This assessment was based on the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission, or COSO, in Internal Control — Integrated Framework (2013). Based on this assessment, management believes that, as of July 3, 2016, our internal control over financial reporting was effective.
BDO USA, LLP, our independent registered public accounting firm, issued an attestation report on the effectiveness of our internal control over financial reporting. Their report appears below.
 
/S/    JOSEPH J. HARTNETT 
 
/S/    JOSEPH G. MCCORMACK
Joseph J. Hartnett
Interim President and Chief Executive Officer
September 6, 2016
 
Joseph G. McCormack
Senior Vice President and Chief Financial Officer
September 6, 2016

42

Table of Contents


REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of
Sparton Corporation
Schaumburg, Illinois
We have audited Sparton Corporation’s internal control over financial reporting as of July 3, 2016, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). Sparton Corporation’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Item 9A, Management Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
In our opinion, Sparton Corporation maintained, in all material respects, effective internal control over financial reporting as of July 3, 2016, based on the COSO criteria.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Sparton Corporation as of July 3, 2016 and June 30, 2015, and the related consolidated statements of operations, comprehensive (loss) income, cash flows and shareholders’ equity for each of the three years in the period ended July 3, 2016, and our report dated September 6, 2016 expressed an unqualified opinion thereon.
/s/ BDO USA, LLP
Grand Rapids, Michigan
September 6, 2016

 

43

Table of Contents

ITEM 9B.    OTHER INFORMATION
None.
PART III
 
ITEM 10.    DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE
The information required by Item 10 is incorporated herein by reference from the Company’s Proxy Statement for the 2016 Annual Meeting of Shareholders. Information concerning executive officers is set forth in Part I, Item 1 of this Annual Report on Form 10-K.
ITEM 11.    EXECUTIVE COMPENSATION
The information required by Item 11 is incorporated herein by reference from the Company’s Proxy Statement for the 2016 Annual Meeting of Shareholders.
ITEM 12.    SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS
The information required by Item 12 is incorporated herein by reference from the Company’s Proxy Statement for the 2016 Annual Meeting of Shareholders.
ITEM 13.    CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS AND DIRECTOR INDEPENDENCE
The information required by Item 13 is incorporated herein by reference from the Company’s Proxy Statement for the 2016 Annual Meeting of Shareholders.
ITEM 14.    PRINCIPAL ACCOUNTANT FEES AND SERVICES
The information required by Item 14 is incorporated herein by reference from the Company’s Proxy Statement for the 2016 Annual Meeting of Shareholders.

44

Table of Contents

PART IV
 
ITEM 15.    EXHIBITS AND FINANCIAL STATEMENT SCHEDULES
(a)
The following documents are filed as part of this Annual Report on Form 10-K:
1.
Financial Statements
See the Index to Consolidated Financial Statements on page F-1.
2.
Financial Statement Schedules
See the Index to Consolidated Financial Statements on page F-1.
3.
See the Exhibit Index following the financial statements.
(b)
See the Exhibit Index following the financial statements.
(c)
Financial Statement Schedules. See (a) 2 above.

45

Table of Contents

SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
Sparton Corporation
By:
/S/    JOSEPH J. HARTNETT
 
Joseph J. Hartnett
Interim President and Chief Executive Officer
 
Date: September 6, 2016
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
 
Name
  
Title
 
Date
 
 
 
 
 
/S/    JAMES R. SWARTWOUT
  
Director, Chairman of the Board of Directors
 
September 6, 2016
James R. Swartwout
 
 
 
 
 
 
 
/S/     JOSEPH J. HARTNETT
  
Director, Interim President and
Chief Executive Officer,
(Principal Executive Officer)
 
September 6, 2016
Joseph J. Hartnett
 
 
 
 
 
 
 
/S/     ALAN L. BAZAAR
  
Director
 
September 6, 2016
Alan L. Bazaar
 
 
 
 
 
 
 
/S/     JAMES D. FAST 
  
Director
 
September 6, 2016
James D. Fast
 
 
 
 
 
 
 
/S/     JOHN A. JANITZ
  
Director
 
September 6, 2016
John A. Janitz
 
 
 
 
 
 
 
/S/     CHARLES R. KUMMETH
  
Director
 
September 6, 2016
Charles R. Kummeth
 
 
 
 
 
 
 
/S/     DAVID P. MOLFENTER
  
Director
 
September 6, 2016
David P. Molfenter
 
 
 
 
 
 
 
/S/     FRANK A. WILSON
  
Director
 
September 6, 2016
Frank A. Wilson
 
 
 
 
 
 
 
/S/     JOSEPH G. MCCORMACK
 
Senior Vice President and
Chief Financial Officer
(Principal Financial and Accounting Officer)
 
September 6, 2016
Joseph G. McCormack
 
 


46

Table of Contents

SPARTON CORPORATION AND SUBSIDIARIES
INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND SCHEDULE
 
 
Page



F-1


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of
Sparton Corporation
Schaumburg, Illinois

We have audited the accompanying consolidated balance sheets of Sparton Corporation and subsidiaries as of July 3, 2016 and June 30, 2015, and the related consolidated statements of operations, comprehensive (loss) income, cash flows and shareholders’ equity for each of the three years in the period ended July 3, 2016. In connection with our audits of the financial statements, we have also audited the financial statement schedule listed in the accompanying index. These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements and schedule. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Sparton Corporation and subsidiaries as of July 3, 2016 and June 30, 2015, and their results of operations and cash flows for each of the three years in the period ended July 3, 2016, in conformity with accounting principles generally accepted in the United States of America.

Also, in our opinion, the financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Sparton Corporation’s internal control over financial reporting as of July 3, 2016, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) and our report dated September 6, 2016 expressed an unqualified opinion thereon.

/s/ BDO USA, LLP

Grand Rapids, Michigan
September 6, 2016


F-2


Table of Contents

SPARTON CORPORATION AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
(Dollars in thousands, except share data)
 
 
July 3,
2016
 
June 30,
2015
Assets
 
 
 
Current Assets:
 
 
 
Cash and cash equivalents
$
132

 
$
14,914

Accounts receivable, net of allowance for doubtful accounts of $407 and $173, respectively
46,759

 
70,974

Inventories and cost of contracts in progress, net
77,871

 
79,503

Prepaid expenses and other current assets
5,844

 
5,488

Total current assets
130,606

 
170,879

Property, plant and equipment, net
33,320

 
32,608

Goodwill
12,663

 
74,175

Other intangible assets, net
36,933

 
45,825

Deferred income taxes
25,784

 
6,913

Other non-current assets
6,692

 
7,151

Total assets
$
245,998

 
$
337,551

Liabilities and Shareholders’ Equity
 
 
 
Current Liabilities:
 
 
 
Accounts payable
$
38,290

 
$
29,948

Accrued salaries and wages
10,609

 
9,089

Accrued health benefits
903

 
1,510

Performance based payments on customer contracts

 
1,756

Current portion of capital lease obligations
217

 

Other accrued expenses
12,420

 
16,328

Total current liabilities
62,439

 
58,631

Credit facility
97,206

 
154,500

Capital lease obligations, less current portion
332

 

Environmental remediation
6,117

 
7,117

Pension liability
1,276

 
424

Total liabilities
167,370

 
220,672

Commitments and contingencies

 

Shareholders’ Equity:
 
 
 
Preferred stock, no par value; 200,000 shares authorized; none issued

 

Common stock, $1.25 par value; 15,000,000 shares authorized, 9,845,469 and 9,886,618 shares issued and outstanding, respectively
12,307

 
12,358

Capital in excess of par value
16,407

 
16,045

Retained earnings
51,650

 
89,933

Accumulated other comprehensive loss
(1,736
)
 
(1,457
)
Total shareholders’ equity
78,628

 
116,879

Total liabilities and shareholders’ equity
$
245,998

 
$
337,551

See Notes to consolidated financial statements.

F-3

Table of Contents

SPARTON CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
(Dollars in thousands, except per share data)
 
 
For fiscal years
 
2016
 
2015
 
2014
Net sales
$
419,362

 
$
382,125

 
$
336,501

Cost of goods sold
339,214

 
307,311

 
271,551

Gross profit
80,148

 
74,814

 
64,950

Operating expense:
 
 
 
 
 
Selling and administrative expenses
55,151

 
46,969

 
35,682

Internal research and development expenses
2,344

 
1,502

 
1,169

Amortization of intangible assets
9,592

 
6,591

 
3,422

Restructuring charges
2,206

 

 
188

Reversal of accrued contingent consideration
(1,530
)
 

 

Impairment of goodwill
64,174

 

 

Legal settlement

 
2,500

 

Environmental remediation

 

 
4,238

Total operating expense
131,937

 
57,562

 
44,699

Operating (loss) income
(51,789
)
 
17,252

 
20,251

Other income (expense):
 
 
 
 
 
Interest expense
(3,803
)
 
(2,456
)
 
(838
)
Other, net
93

 
159

 
189

Total other expense, net
(3,710
)
 
(2,297
)
 
(649
)
(Loss) income before income taxes
(55,499
)
 
14,955

 
19,602

Income taxes
(17,216
)
 
3,966

 
6,615

Net (loss) income
$
(38,283
)
 
$
10,989

 
$
12,987

(Loss) income per share of common stock:
 
 
 
 
 
Basic
$
(3.91
)
 
$
1.10

 
$
1.28

Diluted
$
(3.91
)
 
$
1.10

 
$
1.28

Weighted average shares of common stock outstanding:
 
 
 
 
 
Basic
9,786,315

 
9,874,441

 
10,109,915

Diluted
9,786,315

 
9,885,961

 
10,141,395

See Notes to consolidated financial statements.


F-4

Table of Contents

SPARTON CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE (LOSS) INCOME
(Dollars in thousands)
 
 
For fiscal years
 
2016
 
2015
 
2014
Net (loss) income
$
(38,283
)
 
$
10,989

 
$
12,987

Other comprehensive (loss) income, net:
 
 
 
 
 
Pension experience (loss) gain, net of tax benefit
100

 
(458
)
 
152

Pension amortization of unrecognized net actuarial loss, net of tax
(682
)
 
54

 
81

Pension pro rata recognition of lump-sum settlements, net of tax
218

 

 
54

Unrecognized gain (loss) on marketable equity securities, net of tax
85

 
(85
)
 

Other comprehensive (loss) income, net
(279
)
 
(489
)
 
287

Comprehensive (loss) income
$
(38,562
)
 
$
10,500

 
$
13,274

See Notes to consolidated financial statements.

F-5

Table of Contents

SPARTON CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
(Dollars in thousands)
 
For fiscal years
 
2016
 
2015
 
2014
Cash Flows from Operating Activities:
 
 
 
 
 
Net (loss) income
$
(38,283
)
 
$
10,989

 
$
12,987

Adjustments to reconcile net (loss) income to net cash provided by operating activities:
 
 
 
 
 
Depreciation
6,083

 
4,645

 
4,700

Amortization of intangible assets
9,592

 
6,591

 
3,422

Deferred income taxes
(18,562
)
 
(873
)
 
(976
)
Stock-based compensation expense
289

 
1,885

 
1,662

Loss on sale of property, plant and equipment, net
56

 

 

Loss on sale of securities available for sale
129

 

 

Impairment of goodwill
64,174

 

 

Reversal of accrued contingent consideration
(1,530
)
 

 

Excess tax benefit from stock-based compensation
(162
)
 
(1,044
)
 
(522
)
Amortization of deferred financing costs
298

 
1,169

 
203

Legal settlement

 
2,500

 

Environmental remediation

 

 
4,238

Gross profit effect of capitalized profit in inventory from acquisition

 
299

 
337

Changes in operating assets and liabilities, net of business acquisitions:
 
 
 
 
 
Accounts receivable
23,829

 
(7,040
)
 
4,886

Inventories and cost of contracts in progress
(3,419
)
 
501

 
1,484

Prepaid expenses and other assets
(609
)
 
(2,319
)
 
463

Performance based payments on customer contracts
(1,756
)
 
(1,440
)
 
(17,706
)
Accounts payable and accrued expenses
8,003

 
(11,326
)
 
(2,727
)
Net cash provided by operating activities
48,132

 
4,537

 
12,451

Cash Flows from Investing Activities:
 
 
 
 
 
Acquisition of businesses, net of cash acquired
178

 
(97,319
)
 
(35,560
)
Proceeds from sale of securities available for sale
857

 

 

Purchases of property, plant and equipment
(6,098
)
 
(5,802
)
 
(3,501
)
Proceeds from sale of property, plant and equipment
221

 

 
69

Purchase of securities available for sale

 
(986
)
 

Net cash used in investing activities
(4,842
)
 
(104,107
)
 
(38,992
)
Cash Flows from Financing Activities:
 
 
 
 
 
Borrowings from credit facility
128,050

 
215,835

 
70,000

Repayments against credit facility
(185,344
)
 
(102,335
)
 
(40,623
)
Payment of debt financing costs
(692
)
 
(1,423
)
 

Repurchase of stock
(140
)
 
(6,830
)
 
(1,559
)
Payments under capital lease agreements
(108
)
 

 

Excess tax benefit from stock-based compensation
162

 
1,044

 
522

Proceeds from the exercise of stock options

 
165

 
144

Net cash (used in) provided by financing activities
(58,072
)
 
106,456

 
28,484

Net (decrease) increase in cash and cash equivalents
(14,782
)
 
6,886

 
1,943

Cash and cash equivalents at beginning of year
14,914

 
8,028

 
6,085

Cash and cash equivalents at end of year
$
132

 
$
14,914

 
$
8,028

Supplemental disclosure of cash flow information:
 
 
 
 
 
Cash paid for interest
$
3,506

 
$
1,747

 
$
631

Cash paid for income taxes
766

 
7,190

 
7,065

Machinery and equipment financed under capital leases
656

 

 

Supplemental disclosure of non-cash investing activities:
 
 
 
 
 
Adjustments to acquired companies' opening balance sheets
3,412

 
603

 
252

See Notes to consolidated financial statements.

F-6

Table of Contents

SPARTON CORPORATION AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY
(Dollars in thousands) 
 
Common Stock
 
Capital
In Excess of
Par Value
 
Retained
Earnings
 
Accumulated
Other
Comprehensive
Loss
 
Total
Shareholders’
Equity
 
Shares
 
Amount
 
Balance at June 30, 2013
10,095,716

 
$
12,619

 
$
18,751

 
$
65,957

 
$
(1,255
)
 
$
96,072

Issuance of stock
96,664

 
121

 
(121
)
 

 

 

Forfeiture of restricted stock
(3,344
)
 
(4
)
 
4

 

 

 

Repurchase of stock
(76,880
)
 
(96
)
 
(1,463
)
 

 

 
(1,559
)
Exercise of stock options
16,875

 
21

 
123

 

 

 
144

Stock-based compensation

 

 
1,662

 

 

 
1,662

Excess tax benefit from stock-based compensation

 

 
522

 

 

 
522

Comprehensive income, net of tax

 

 

 
12,987

 
287

 
13,274

Balance at June 30, 2014
10,129,031

 
12,661

 
19,478

 
78,944

 
(968
)
 
110,115

Issuance of stock
26,793

 
34

 
(34
)
 

 

 

Forfeiture of restricted stock
(39,031
)
 
(49
)
 
49

 

 

 

Repurchase of stock
(249,420
)
 
(312
)
 
(6,518
)
 

 

 
(6,830
)
Exercise of stock options
19,245

 
24

 
141

 

 

 
165

Stock-based compensation

 

 
1,885

 

 

 
1,885

Excess tax benefit from stock-based compensation

 

 
1,044

 

 

 
1,044

Comprehensive income, net of tax

 

 

 
10,989

 
(489
)
 
10,500

Balance at June 30, 2015
9,886,618

 
12,358

 
16,045

 
89,933

 
(1,457
)
 
116,879

Issuance of stock
17,245

 
22

 
(22
)
 

 

 

Forfeiture of restricted stock
(52,303
)
 
(65
)
 
65

 

 

 

Repurchase of stock
(6,091
)
 
(8
)
 
(132
)
 

 

 
(140
)
Stock-based compensation

 

 
289

 

 

 
289

Excess tax benefit from stock-based compensation

 

 
162

 

 

 
162

Comprehensive income, net of tax

 

 

 
(38,283
)
 
(279
)
 
(38,562
)
Balance at July 3, 2016
9,845,469

 
$
12,307

 
$
16,407

 
$
51,650

 
$
(1,736
)
 
$
78,628

See Notes to consolidated financial statements.

F-7

Table of Contents

SPARTON CORPORATION AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(Dollars in thousands, except share data)
(1) Business
Sparton Corporation and subsidiaries (the “Company” or “Sparton”) has been in continuous existence since 1900. It was last reorganized in 1919 as an Ohio corporation. The Company is a provider of design, development and manufacturing services for complex electromechanical devices, as well as sophisticated engineered products complementary to the same electromechanical value stream. The Company serves the Medical & Biotechnology, Military & Aerospace and Industrial & Commercial markets through two reportable business segments; Manufacturing & Design Services (“MDS”) and Engineered Components & Products (“ECP”). Prior to fiscal 2015, the Company reported under three reportable business segments; Medical Device (“Medical”), Complex Systems (“CS”) and Defense & Security Systems (“DSS”). The prior periods herein reflect this change in segment reporting. See Note 16, Business Segments, of the "Notes to Consolidated Financial Statements" in this form 10-K for a further discussion of business segments. All of the Company's facilities are certified to one or more of the ISO/AS standards, including ISO 9001, AS9100 and ISO 13485, with most having additional certifications based on the needs of the customers they serve. The majority of the Company's customers are in highly regulated industries where strict adherence to regulations such as the International Tariff and Arms Regulations ("ITAR") is necessary. The Company's products and services include offerings for Original Equipment Manufacturers (“OEM”) and Emerging Technology (“ET”) customers that utilize microprocessor-based systems which include transducers, printed circuit boards and assemblies, sensors and electromechanical components, as well as development and design engineering services relating to these product sales. Sparton also develops and manufactures sonobuoys, anti-submarine warfare (“ASW”) devices used by the United States Navy and foreign governments that meet Department of State licensing requirements. Additionally, Sparton manufactures rugged flat panel display systems for military panel PC workstations, air traffic control and industrial applications as well as high performance industrial grade computer systems and peripherals. Many of the physical and technical attributes in the production of these proprietary products are similar to those required in the production of the Company's other electrical and electromechanical products and assemblies.
For fiscal year 2016, the Company has changed from a calendar year to a 52-53 week year (5-4-4 basis) ending on the
Sunday closest to June 30. Therefore, the financial results of certain fiscal years and the associated 14 week quarters, will not
be exactly comparable to the prior and subsequent 52 week fiscal years and the associated quarters having only 13 weeks. The
change was not deemed a change in fiscal year for purposes of reporting subject to Rule 13a-10 or 15d-10; hence, no transition
reports are required. The Company has made the change in fiscal years on a prospective basis and thus the change will not
impact the Company’s financial statements as of and for fiscal year 2016 or any interim period therein. The Company believes the change in fiscal years will provide numerous benefits, including more consistency between reported periods and to better align its reporting periods with the Company’s peer group.
On April 27, 2016, Sparton announced that its Board of Directors had authorized a process to identify parties interested in acquiring the Company. This process is ongoing and there can be no assurance that this process will result in a consummation of any transaction. The Company cannot currently determine if the process will ultimately conclude in a sale of all or some of its assets. As such, no adjustments have been made to the Company’s carrying value of its assets or liabilities as a result of the contemplated sale.
(2) Summary of Significant Accounting Policies
Basis of presentation and principles of consolidation — The consolidated financial statements include the accounts of Sparton Corporation and subsidiaries and have been prepared in accordance with accounting principles generally accepted in the United States of America (“GAAP”). All significant intercompany accounts and transactions have been eliminated in consolidation. Certain reclassifications of prior year amounts have been made to conform to the current year presentation.
Use of estimates — Management of the Company has made a number of estimates, judgments and assumptions relating to the reporting of assets and liabilities and the disclosure of contingent liabilities at the dates of the consolidated balance sheets and revenue and expense during the reporting periods to prepare these consolidated financial statements in conformity with GAAP. Actual results could differ from those estimates.
Cash and cash equivalents — Cash and cash equivalents include cash on hand, demand deposits and money market funds with original maturities of three months or less. Cash equivalents are stated at cost which approximates fair value.
Accounts receivable, credit practices and allowances for doubtful accounts — Accounts receivable are customer obligations generally due under normal trade terms for the industry. Credit terms are granted and periodically revised based on

F-8

Table of Contents

evaluations of the customers’ financial condition. The Company performs ongoing credit evaluations of its customers and although the Company does not generally require collateral, letters of credit or cash advances may be required from customers in order to support accounts receivable in certain circumstances. The Company maintains an allowance for doubtful accounts on receivables for estimated losses resulting from the inability of its customers to make required payments. The allowance is estimated primarily based on information known about specific customers with respect to their ability to make payments and future expectations of conditions that might impact the collectability of accounts. When management determines that it is probable that an account will not be collected, all or a portion of the amount is charged against the allowance for doubtful accounts.
Inventories and costs of contracts in progress — Inventories are valued at the lower of cost (first-in, first-out basis) or market and include costs related to long-term contracts as disclosed below. Inventories, other than contract costs, are principally raw materials and supplies. Certain United States government contracts allow Sparton to submit performance based billings, which are then applied against inventories purchased and manufacturing costs incurred by the Company throughout its performance under these contracts. Inventories were reduced by performance based payments from the U.S. government for costs incurred related to long-term contracts, thereby establishing inventory to which the U.S. government then has title, of $8,963 and $7,456 respectively, at July 3, 2016 and June 30, 2015. At July 3, 2016 and June 30, 2015, current liabilities include performance based payments of $0 and $1,756, respectively, on government contracts. As these payments were in excess of cost, there is no inventory to which the government would claim title and, therefore, no offset to inventory has been made.
Customer orders are based upon forecasted quantities of product manufactured for shipment over defined periods. Raw material inventories are purchased to fulfill these customer requirements. Within these arrangements, customer demands for products frequently change, sometimes creating excess and obsolete inventories. The Company regularly reviews raw material inventories by customer for both excess and obsolete quantities. Wherever possible, the Company attempts to recover its full cost of excess and obsolete inventories from customers or, in some cases, through other markets. When it is determined that the Company’s carrying cost of such excess and obsolete inventories cannot be recovered in full, a charge is taken against income for the difference between the carrying cost and the estimated realizable amount. These cost adjustments for excess and obsolete inventory create a new cost basis for the inventory. The Company recorded inventory write-downs totaling $1,653, $927 and $468 for fiscal years 2016, 2015 and 2014, respectively. These charges are included in cost of goods sold for the periods presented. If inventory that has previously been impaired is subsequently sold, the amount of reduced cost basis is reflected as cost of goods sold. The Company experienced minimal subsequent sales of excess and obsolete inventory during fiscal years 2016, 2015 and 2014 that resulted in higher gross margins due to previous write-downs. Such sales and the impact of those sales on gross margin were not material to the years presented.
Property, plant and equipment, net — Property, plant and equipment are stated at cost less accumulated depreciation. Major improvements and upgrades are capitalized while ordinary repair and maintenance costs are expensed as incurred. Depreciation is provided over estimated useful lives on both straight-line and accelerated methods. Estimated useful lives generally range from twelve to thirty-nine years for buildings and improvements, twelve years for machinery and equipment and five years for test equipment.
Goodwill — Goodwill resulting from business combinations represents the excess of purchase price over the fair value of the net assets of the businesses acquired. Goodwill is not amortized, but rather tested for impairment annually, as well as whenever there are events or changes in circumstances (triggering events) which suggest that the carrying value of goodwill may not be recoverable. The Company performs its annual goodwill impairment testing in the fourth quarter based on its historical financial results through the third quarter end. The goodwill impairment test is performed at the reporting unit level, which is the lowest level at which goodwill is evaluated for management purposes. The Company has identified reporting units to be its two reportable business segments - MDS and ECP for fiscal years 2016 and 2015. In fiscal year 2014 the Company had three reportable business segments determined to be its identified reporting units - Medical, Complex Systems and DSS.
The Company may elect to perform a qualitative assessment for its annual goodwill impairment test. If the qualitative assessment indicates that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, or if Sparton elects to not perform a qualitative assessment, then the Company would be required to perform a quantitative impairment test for goodwill.
The quantitative impairment analysis is a two-step process. First, the Company determines the fair value of the reporting unit and compares it to its carrying value. The fair value of reporting units is determined based on a weighting of both projected discounted future results and comparative market multiples. The projected discounted future results (discounted cash flow approach) is based on assumptions that are consistent with the Company’s estimates of future growth and the strategic plan used to manage the underlying business. Factors requiring significant judgment include assumptions related to future revenue growth rates, operating margins, terminal growth rates and discount factors, amongst other considerations. If the carrying value of the reporting unit exceeds the fair value in the first step, a second step is performed to measure the amount of an impairment

F-9

Table of Contents

loss. In the second step, an impairment loss is recognized for any excess of the carrying value of the reporting unit’s goodwill over its implied fair value. The implied fair value of goodwill is determined by allocating the fair value of the reporting unit using a residual fair value allocation. The residual fair value allocated to goodwill is the implied fair value of the reporting unit's goodwill. The Company’s fair value estimates related to its goodwill impairment analyses are based on Level 3 inputs within the fair value hierarchy as described below in this note under “Fair value measurements.” Determining the fair value of any reporting unit and intangible asset is judgmental in nature and involves the use of significant estimates and assumptions. The Company bases its fair value estimates on assumptions believed to be reasonable, but which are unpredictable and inherently uncertain. Actual future results may differ from those estimates. Circumstances that may lead to future impairment of goodwill include, but are not limited to, unforeseen decreases in future performance or industry demand, a further loss of a significant customer, or the inability to achieve sufficient organic revenue growth to offset fluctuations in customer demand.
The Company's fiscal year 2014 quantitative annual tests of goodwill (Step 1) related to the Medical, Complex Systems and DSS reporting units resulted in fair values in excess of the related carrying values of the assets and as such did not indicate that the related goodwill was impaired. The Company determined at that time that the fair value of the three reporting units substantially exceeded their carrying values, by 70%, 33% and over 1,100%, respectively. In fiscal 2015, the Company elected to perform the optional qualitative assessment of goodwill and concluded that it was more likely than not that the fair value of goodwill in its reporting units was in excess of its respective carrying amount and therefore, no further testing was required. In fiscal 2016, the Step 1 impairment testing of goodwill was performed and resulted in the carrying values of its MDS reporting unit in excess of its fair value indicating potential impairment. The decline in value in the MDS reporting unit was a result of the underperformance of the Company’s most recent acquisition (Hunter Technology Corporation), and the inability to achieve sufficient organic revenue growth to offset the loss of a large customer due to insourcing, as well as revenue declines due to fluctuations in customer demand across the MDS reporting unit. The Company performed the Step 2 analysis of goodwill impairment for this reporting unit and based on the valuation of the reporting unit as well as the fair value of the reporting unit's individual tangible and intangible assets, it was determined that goodwill within this reporting unit was fully impaired. As such, the Company recorded an impairment of goodwill charge of $64,174. Prior to the fourth quarter of fiscal 2016, no triggering events or other facts and circumstances were identified that indicated that it was more likely than not that the fair value of the MDS segment was less than its carrying value. The impairment recognized in the fourth quarter of fiscal 2016 was a result of the continued underperformance of the acquired Hunter Technology Corporation operations and the inability of the Company to achieve sufficient organic revenue growth to offset fluctuations in customer demands. The fair value of the Company’s ECP reporting unit was in excess of its carrying value and, as such, indicated no impairment of goodwill.
Other Intangible Assets — The Company’s intangible assets other than goodwill represent the values assigned to acquired customer relationships, acquired non-compete agreements, acquired trademarks/trade names and acquired unpatented technology. At July 3, 2016, customer relationships and non-compete agreements totaling $27,650 and $1,998, respectively, are included in the MDS segment, while customer relationships, non-compete agreements, trademarks/trade names and unpatented technology totaling $4,975, $195, $1,382 and $733, respectively, are included in the ECP segment. The impairment test for these intangible assets is conducted when impairment indicators are present. The Company continually evaluates whether events or circumstances have occurred that would indicate the remaining estimated useful lives of its intangible assets warrant revision or that the remaining balance of such assets may not be recoverable. The Company uses an estimate of the related undiscounted cash flows over the remaining life of the asset in measuring whether the asset is recoverable. If the carrying amount of an asset exceeds its estimated undiscounted future cash flows, an impairment charge would be recognized for the amount that the carrying amount of the asset exceeds the fair value of the asset. The Company’s fair value estimates related to its intangible assets impairment analyses are based on Level 3 inputs within the fair value hierarchy as described below in this note under “Fair value measurements.” The Company had a third-party valuation of the recoverability of intangible assets performed in the fourth quarter of fiscal 2016 and it was determined that the assets were fully recoverable and no write-down of such assets was necessary.
Acquired customer relationships are being amortized using an accelerated methodology over periods of seven to fifteen years. Acquired non-compete agreements are being amortized on a straight-line basis over periods of two to five years as the ratable decline in value over time is most consistent with the contractual nature of these assets. Acquired trademarks/trade names are being amortized on a straight-line basis over periods of one to ten years and acquired unpatented technology is being amortized using an accelerated methodology over seven years.
Impairment of long-lived assets — The Company reviews other long-lived assets that are not held for sale (including intangibles other than goodwill) for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Impairment is determined by comparing the carrying value of the assets to their estimated future undiscounted cash flows. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset group exceeds the fair value of the asset group. Assets to be disposed of are reported at the lower of the carrying amount or fair value less costs to sell and are reviewed at least quarterly.

F-10

Table of Contents

Stock-based compensation — The Company measures the cost of employee and director services received in exchange for an award of equity-based securities using the fair value of the award on the date of the grant. The Company recognizes that cost on a straight-line basis over the period that the award recipient is required to provide service to the Company in exchange for the award and, for certain awards, subject to the probability that related performance targets will be met. See Note 12, Stock-Based Compensation, of the "Notes to Consolidated Financial Statements" in this Form 10-K for a further discussion of stock-based compensation.
(Loss) earnings per share — Basic (loss) earnings per share is based on the weighted average number of common shares and participating securities outstanding during the period. Diluted earnings or loss per share include the dilutive effect of additional potential common shares issuable under our stock-based compensation plans and are determined using the treasury stock method. Unvested restricted stock awards, which contain non-forfeitable rights to dividends whether paid or unpaid, are included in the number of shares outstanding for both basic and diluted earnings or loss per share calculations. Unvested contingently issuable participating restricted shares are excluded from basic (loss) earnings per share. In the event of a net loss, unvested restricted stock awards are excluded from the calculation of both basic and diluted loss per share. See Note 13, (Loss) Earnings Per Share Data, of the "Notes to Consolidated Financial Statements" in this Form 10-K for a further discussion.
Income taxes - Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement amounts of assets and liabilities and their respective tax bases and operating loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in future years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rate is recognized in income in the period that includes the enactment date. Deferred tax assets are reduced through the establishment of a valuation allowance at the time, based upon available evidence, it becomes more likely than not that the deferred tax assets will not be realized.
The Company recognizes the tax benefit from an uncertain tax position only if it is more likely than not that the tax position will be sustained on examination by the taxing authorities, based on the technical merits of the position. The tax benefits recognized in the consolidated financial statements from such a position are measured based on the largest benefit that has a greater than 50% likelihood of being realized upon ultimate resolution. Management also assesses whether uncertain tax positions, as filed, could result in the recognition of a liability for possible interest and penalties. The Company's policy is to include interest and penalties related to unrecognized tax benefits as a component of income tax expense.
ERAPSCO Agreement — Sparton is a 50/50 joint venture (“JV”) partner with UnderSea Sensor Systems, Inc. (“USSI”), the only other major producer of U.S. derivative sonobuoys. USSI’s parent company is Ultra Electronics Holdings PLC, based in the United Kingdom. The JV operates under the name ERAPSCO and allows Sparton and USSI to combine their own unique and complementary backgrounds to jointly develop and produce U.S. derivative sonobuoy designs for the U.S. Navy as well as foreign governments that meet Department of State licensing requirements. ERAPSCO maintains the DBA Sonobuoy TechSystems through which it conducts business directly with foreign governments. In concept, and in practice, ERAPSCO serves as a pass-through entity maintaining no funds or assets. While the JV provides the opportunity to maximize efficiencies in the design and development of the related sonobuoys, both of the joint venture partners function independently as subcontractors; therefore, there is no separate entity to be accounted for or consolidated. The Board of Directors of ERAPSCO has the responsibility for the overall management and operation of the JV. The six member board consists of equal representation (full time employees) from both JV partners for three year terms. Personnel necessary for the operation of ERAPSCO, specifically a president, vice president, general manager, contract administrator and financial manager, are similarly assigned by the JV partners for rotating three year terms and the costs of these assigned individuals are borne by the party assigning the personnel. In response to a customer request for proposal (“RFP”) that ERAPSCO will bid on, the Board of Directors of ERAPSCO approves both the composition of a response to the RFP and the composite bid to be submitted to the customer. The Board of Directors strives to divide the aggregate contract awards at a 50/50 share ratio. Each JV partner bears the costs it incurs associated with the preparation and submission of proposals. Each JV partner submits to ERAPSCO a proposal for the estimated price of performing that portion of the RFP applicable to it. Upon award of a contract to the JV, separate subcontracts are generated between ERAPSCO and each of the JV partners defining the responsibilities and compensation. These subcontracts contain terms and conditions consistent with the prime contract. Each JV partner is responsible to ERAPSCO for the successful execution of its respective scope of work under its subcontract and each JV partner is individually accountable for the profit or losses sustained in the execution of the subcontract against its respective bid. In some instances, either Sparton or USSI handles the complete production and delivery of sonobuoys to ERAPSCO's customer. In other instances, either Sparton or USSI starts the production and ship completed subassemblies to the other party for additional processing before being delivered to the customers. Under ERAPSCO, individual contract risk exposures are reduced, while the likelihood of achieving U.S. Navy and other ASW objectives is enhanced. ERAPSCO has been in existence since 1987 and historically, the agreed upon products included under the JV were generally developmental sonobuoys. In 2007, the JV expanded to include all future sonobuoy development and substantially all U.S. derivative sonobuoy products for

F-11

Table of Contents

customers outside of the United States. The JV was further expanded three years later to include all sonobuoy products for the U.S. Navy beginning with U.S. Navy's 2010 fiscal year contracts.
Revenue recognition — The Company’s net sales are comprised primarily of product sales, with supplementary revenues earned from engineering and design services. Standard contract terms are FOB shipping point. Revenue from product sales is generally recognized upon shipment of the goods; service revenue is recognized as the service is performed or under the percentage of completion method, depending on the nature of the arrangement. Long-term contracts related to ECP sonobuoy sales to the U.S. Navy and foreign government customers that require lot acceptance testing recognize revenue under the units-of-production percentage of completion method. The Company additionally has certain other long-term contracts that are accounted for under the units shipped percentage-of-completion method. Certain upfront engineering costs in relation to certain of these long-term contracts are capitalized and recognized over the life of the contract. At July 3, 2016 and June 30, 2015, current liabilities include payments in excess of costs of $0 and $1,756, respectively, on government contracts. As noted above, sales related to these billings are recognized based upon units completed and are not recognized at the time of billings. A provision for the entire amount of a loss on a contract is charged to operations as soon as the loss is identified and the amount is reasonably determinable. Shipping and handling costs are included in cost of goods sold.
Advertising Costs — The Company expenses advertising costs as they are incurred. Advertising expense was $106, $160 and $191 for fiscal years 2016, 2015 and 2014, respectively.
Research and development expenditures — Internal research and development expenses reflect costs incurred for the internal development of technologies for use in undersea warfare, navigation, hand held targeting applications as wells as rugged computer and display devices. These costs include salaries and related expenses, contract labor and consulting costs, materials and the cost of certain research and development specific equipment. The Company incurred $2,344, $1,502 and $1,169 of internally funded research and development expenses during fiscal years 2016, 2015 and 2014, respectively. Customer funded research and development costs, which are usually part of a larger production agreement, totaled $16,736, $9,944 and $9,708 for the fiscal years 2016, 2015 and 2014, respectively.
Fair value measurements — Fair value estimates and assumptions and methods used to estimate the fair value of the Company’s assets and liabilities are made in accordance with the requirements of the Financial Accounting Standards Board (the “FASB”), Accounting Standards Codification (“ASC”) Topic 820, “Fair Value Measurements and Disclosures” (“ASC 820”).
ASC 820 clarifies that fair value is an exit price, representing the amount that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. As such, fair value is a market-based measurement that should be determined based on assumptions that market participants would use in pricing an asset or liability. As a basis for considering such assumptions, ASC 820 establishes a three-tier value hierarchy, which prioritizes the inputs used in measuring fair value as follows: Level 1 are observable inputs such as quoted prices in active markets; Level 2 are inputs other than the quoted prices in active markets that are observable either directly or indirectly; and Level 3 are unobservable inputs in which there is little or no market data, which require the Company to develop its own assumptions. This hierarchy requires the Company to use observable market data when available and to minimize the use of unobservable inputs when determining fair value. As of July 3, 2016, the Company had no assets or liabilities which it measures and carries on its balance sheet at fair value on a recurring basis.
The fair value of the Company's Credit Facility (as defined below) debt at July 3, 2016 approximated its carrying value of $97,206, as the rates on these borrowings are variable in nature. In the event of an acquisition, the Company estimates the fair value of the assets acquired and liabilities assumed at acquisition date. See Note 3, Acquisitions, of the "Notes to Consolidated Financial Statements" in this form 10-K for a further discussion of these estimated fair values. The fair value of accounts receivable and accounts payable approximated their carrying values at both July 3, 2016 and June 30, 2015.

The Company held marketable equity securities of $0 and $847 at the end of fiscal years 2016 and 2015, respectively. At the end of fiscal year 2015, the securities were classified as available-for-sale and recorded in other non-current assets on the Consolidated Balance Sheets. These securities were carried at estimated fair value with unrealized gains and losses reflected in Accumulated Other Comprehensive Income and were classified as Level 1 in the fair value hierarchy. The assessment for impairment of marketable equity securities as available-for-sale is based on established financial methodologies, including quoted market prices for publicly traded securities. If the Company had determined that a loss in the value of the investment was other than temporary, any such losses would have been recorded in other expense (income), net.
The table below presents a reconciliation for liabilities measured at fair value on a recurring basis using significant unobservable inputs (Level 3) for fiscal years 2016 and 2015.

F-12

Table of Contents

 
June 30,
2014
 
Purchase or additions
 
June 30,
2015
 
Write-down
 
July 3,
2016
Liabilities:
 
 
 
 
 
 
 
 
 
Contingent consideration
$

 
$
1,530

 
$
1,530

 
$
(1,530
)
 
$

Market risk exposure — The Company manufactures its products in the United States, Canada and Vietnam. Sales of the Company’s products are in the U.S. and foreign markets. The Company is subject to foreign currency exchange rate risk relating to intercompany activity and balances and to receipts from customers and payments to suppliers in foreign currencies. Adjustments related to the remeasurement of the Company's Canadian and Vietnamese financial statements into U.S. dollars are included in current earnings. As a result, the Company's financial results could be affected by factors such as changes in foreign currency exchange rates or economic conditions in the domestic and foreign markets in which the Company operates. However, minimal third party receivables and payables are denominated in foreign currency and the related market risk exposure is considered to be immaterial.
The Company's revolving credit line, when drawn upon, is subject to future interest rate fluctuations which could potentially have a negative impact on cash flows of the Company. The Company had $97,206 outstanding under its credit facility at July 3, 2016. A prospective increase of 100 basis points in the interest rate applicable to the Company's outstanding borrowings under its Credit Facility would result in an increase of $972 in its annual interest expense. The Company is not party to any currency exchange or interest rate protection agreements as of July 3, 2016. See Note 8, Debt, of the "Notes to Consolidated Financial Statements" in this form 10-K for a further description on Sparton’s debt.
New accounting standards — In May 2014, the FASB issued Accounting Standards Update No. 2014-09 ("ASU 2014-09"), Revenue from Contracts with Customers, which amends guidance for revenue recognition. Under the new standard, revenue will be recognized when control of the promised goods or services is transferred to customers in an amount that reflects the consideration to which the Company expects to be entitled in exchange for those goods and services. The standard creates a five-step model that will generally require companies to use more judgment and make more estimates than under current guidance when considering the terms of contracts along with all relevant facts and circumstances. These include the identification of customer contracts and separating performance obligations, the determination of transaction price that potentially includes an estimate of variable consideration, allocating the transaction price to each separate performance obligation, and recognizing revenue in line with the pattern of transfer. In August 2015, the FASB issued an amendment to defer the effective date for all entities by one year. The new standard will become effective for annual reporting periods beginning after December 15, 2017, including interim periods within that reporting period. Early adoption is permitted as of annual reporting periods beginning after December 15, 2016. Companies have the option of using either a full or modified retrospective approach in applying this standard. During fiscal 2016, the FASB issued three additional updates which further clarify the guidance provided in ASU 2014-09. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In April 2015, the FASB issued Accounting Standards Update No. 2015-03 ("ASU 2015-03"), Interest - Imputation of Interest (Subtopic 835-30): Simplifying the Presentation of Debt Issuance Costs. ASU 2015-03 changes the presentation of debt issuance costs for term debt in the balance sheet by requiring the debt issuance costs to be presented as a direct deduction from the related debt liability, rather than recorded as an asset. In August 2015, the FASB issued clarification to the guidance in ASU 2015-03 regarding presentation and subsequent measurement of debt issuance costs related to line-of-credit arrangements. The new standard provides clarification regarding costs to secure revolving lines of credit and indicates that the SEC staff would not object to an entity deferring and presenting costs associated with line-of-credit arrangements as an asset and subsequently amortizing the deferred debt issuance costs ratably over the term of the line-of-credit arrangement, regardless of whether there are any outstanding borrowings on the line-of-credit arrangement. The recognition and measurement guidance for debt issuance costs are not affected by the amendments in this update. The provisions of this ASU are effective for fiscal years, and interim periods within those years, beginning after December 15, 2015, although early adoption is permitted. When adopted, this guidance must be applied on a retrospective basis. The adoption of this guidance is not expected to have a significant impact on the Company's consolidated financial statements.
In April 2015, the FASB issued Accounting Standards Update No. 2015-04 (“ASU 2015-04”), Practical Expedient for the Measurement Date of an Employer’s Defined Benefit Obligation and Plan Assets. ASU 2015-04 provides a practical expedient that permits the entity to measure defined benefit plan assets and obligations using the month-end that is closest to the entity’s fiscal year-end when an entity’s fiscal year-end does not coincide with a month-end. ASU 2015-04 will be effective for fiscal years and interim periods beginning after December 15, 2015. ASU 2015-04 is required to be applied prospectively and early adoption is permitted. The Company adopted this guidance in fiscal year 2016. The adoption of this guidance did not have a significant impact on the Company’s consolidated financial statements.

F-13

Table of Contents

In July 2015, the FASB issued Accounting Standards Update No. 2015-11 ("ASU 2015-11"), Simplifying the Measurement of Inventory. ASU 2015-11 clarifies that inventory should be held at the lower of cost or net realizable value. Net realizable value is defined as the estimated selling price, less the estimated costs to complete, dispose and transport such inventory. ASU 2015-11 will be effective for fiscal years and interim periods beginning after December 15, 2016. ASU 2015-11 is required to be applied prospectively and early adoption is permitted. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In November 2015, the FASB issued ASU No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes, which requires that all deferred tax assets and liabilities, along with any related valuation allowance, be classified as non-current in the balance sheet. As a result, each jurisdiction will now only have one net non-current deferred tax asset or liability. However, the new guidance does not change the existing requirement that only permits offsetting within a jurisdiction. Companies are still prohibited from offsetting deferred tax liabilities from one jurisdiction against deferred tax assets of another jurisdiction. The amendments in this accounting standard are effective for public companies for interim and annual reporting periods beginning after December 15, 2016, with early application permitted. The Company has applied the change in accounting as of July 3, 2016. As such, the amounts previously reported as current deferred tax assets and non-current deferred tax liabilities were decreased by $4,714 and $0, respectively, and amounts previously reported as non-current deferred tax assets were increased by $4,714 in the Consolidated Balance Sheet as of June 30, 2015. The change in accounting principle did not have an impact on the Company’s results of operations, cash flows or stockholders’ equity.
In February 2016, the FASB issued Accounting Standards Update No. 2016-02 (“ASU 2016-02”), Leases (Topic 842). ASU 2016-02 establishes a right-of-use (ROU) model that requires a lessee to record a ROU asset and a lease liability on the balance sheet for all leases with terms longer than 12 months. Leases will be classified as either finance or operating, with classification affecting the pattern of expense recognition in the income statement. ASU 2016-02 is effective for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years. A modified retrospective transition approach is required for capital leases and operating leases existing at, or entered into after, the beginning of the earliest comparative period presented in the financial statements, with certain practical expedients available. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In March 2016, the FASB issued Accounting Standards Update No. 2016-09 ("ASU 2016-09"), Compensation - Stock Compensation (Topic 718): Improvements to Employee Share-Based Payment Accounting. ASU 2016-09 will directly impact the tax administration of equity plans. ASU 2016-09 is effective for fiscal years beginning after December 15, 2016, including interim periods within those fiscal years. Early adoption is permitted and any adjustments should be reflected as of the beginning of the fiscal year that includes that interim period. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In June 2016, the FASB issued Accounting Standards Update No. 2016-13 ("ASU 2016-13"), Financial Instruments—Credit Losses (Topic 326). ASU 2016-13 requires the measurement of all expected credit losses for financial assets held at the reporting date based on historical experience, current conditions, and reasonable and supportable forecasts. ASU 2016-13 is effective for fiscal years beginning after December 15, 2019 and early adoption is permitted. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.
In August 2016, the FASB issued Accounting Standards Update No. 2016-15 ("ASU 2016-15"), Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments. ASU 2016-15 will make eight targeted changes to how cash receipts and cash payments are presented and classified in the statement of cash flows. ASU 2016-15 is effective for fiscal years beginning after December 15, 2017. The new standard will require adoption on a retrospective basis unless it is impracticable to apply, in which case it would be required to apply the amendments prospectively as of the earliest date practicable. The Company is currently in the process of evaluating the impact of adoption on its consolidated financial statements.


F-14

Table of Contents

(3) Acquisitions
Fiscal Year 2015
The following table represents the allocation of the total consideration to assets acquired and liabilities assumed in the 2015 acquisitions based on Sparton’s estimate of their respective fair values at the acquisition date:
 
Hunter
 
Stealth
 
KEP Marine
 
RTEmd
 
Argotec
 
IED
 
eMT
Total purchase consideration:
 
 
 
 
 
 
 
 
 
 
 
 
 
Cash
$
55,194

 
$
12,558

 
$
4,300

 
$
2,332

 
$
350

 
$
3,000

 
$
20,000

Common stock
673

 

 

 

 

 

 

Section 338 gross-up payable
572

 

 

 

 

 

 

Working capital adjustment

 

 
(147
)
 
103

 
75

 
292

 
1,600

Income tax adjustment

 

 

 

 

 
(271
)
 
469

Total purchase consideration
$
56,439

 
$
12,558

 
$
4,153

 
$
2,435

 
$
425

 
$
3,021

 
$
22,069

Assets acquired and liabilities assumed:
 
 
 
 
 
 
 
 
 
 
 
 
 
Cash
$
687

 
$

 
$

 
$
206

 
$

 
$

 
$
1,505

Accounts receivable
10,455

 
360

 

 
273

 

 

 
4,444

Inventories
15,683

 
562

 
1,203

 
134

 
55

 
450

 
4,090

Other current assets
419

 

 

 
6

 

 

 
26

Property, plant and equipment
3,195

 

 

 
7

 
118

 

 
584

Customer relationships
15,400

 
3,375

 
1,200

 
800

 

 

 
5,950

Non-compete agreements
420

 
94

 

 

 

 
700

 
2,730

Tradenames and trademarks

 
1,256

 
180

 

 
20

 
180

 
80

Unpatented technology

 
690

 

 

 

 

 

Goodwill
29,277

 
6,718

 
1,570

 
1,930

 
232

 
1,962

 
6,959

Deferred income taxes - non-current

 

 

 
(279
)
 

 
(271
)
 

Other long-term assets
263

 

 

 
4

 

 

 
30

Accounts payable
(15,756
)
 
(425
)
 

 
(14
)
 

 

 
(3,636
)
Other current liabilities
(3,604
)
 
(72
)
 

 
(632
)
 

 

 
(693
)
Total assets acquired and liabilities assumed
$
56,439

 
$
12,558

 
$
4,153

 
$
2,435

 
$
425

 
$
3,021

 
$
22,069

Hunter Technology Corporation On April 14, 2015, the Company acquired Hunter Technology Corporation ("Hunter"), with operations located in Milpitas, CA and Lawrenceville, GA, for $55,000. Hunter, which is part of the Company's MDS segment, provides electronic contract manufacturing in military and aerospace applications. Hunter provides engineering design, new product introduction and full-rate production manufacturing solutions working with major defense and aerospace companies, test and measurement suppliers, secure networking solution providers, medical device manufacturers and a wide variety of industrial customers.
Included in the Company’s Consolidated Statements of Income for fiscal year 2015 are net sales of $14,288 and net loss before income taxes $656, since the April 14, 2015 acquisition of Hunter.
Stealth.com — On March 16, 2015, the Company acquired substantially all of the assets of Stealth.com ("Stealth"), located in Woodbridge, ON, Canada, for $16,000 CAD ($12,558 USD). The acquired business, which is part of the Company's ECP segment, is a supplier of high performance rugged industrial grade computer systems and peripherals that include Mini PC/Small Form Factor Computers, Rackmount Server PCs, Rugged Industrial LCD Monitors, Rugged Portable PCs, Industrial Grade Keyboards and Rugged Trackballs and Mice.
Included in the Company’s Consolidated Statements of Income for fiscal year 2015 are net sales of $2,541 and income before income taxes of $384, since the March 16, 2015 acquisition of Stealth.


F-15

Table of Contents


KEP Marine — On January 21, 2015, the Company acquired certain assets of KEP Marine, a division of Kessler-Ellis Products, located in Eatontown, NJ, for $4,300. The acquired business, which is part of the Company's ECP segment, designs and manufactures industrial displays, industrial computers and HMI software for the Marine market. These product lines have been consolidated into the Aydin Displays facility, located in Birdsboro, PA.
Real-Time Enterprises, Inc. — On January 20, 2015, the Company acquired Real-Time Enterprises, Inc. ("RTEmd"), located in Pittsford, NY, for $2,332. RTEmd will continue to service its current and future customers out of its Pittsford, NY location. The acquired business, which is part of the Company's MDS segment, is a developer of embedded software to operate medical devices and diagnostic equipment through a disciplined approach to product development and quality/regulatory services with specific product experience such as patient monitoring, medical imaging, in-vitro diagnostics, electro-medical systems, surgical applications, ophthalmology, nephrology, infusion pumps and medical imaging.
Included in the Company’s Consolidated Statements of Income for fiscal year 2015 are net sales of $1,173 and loss before income taxes of $182, since the July 9, 2014 acquisition of eMT.
Argotec, Inc. — On December 8, 2014, the Company acquired certain assets of Argotec, Inc. ("Argotec"), located in Longwood, FL, for $350. The acquired business, which is part of the Company's ECP segment, is engaged in developing and manufacturing sonar transducer products and components for the U.S. Navy and also provides aftermarket servicing. These products have been consolidated into the Company's DeLeon Springs, FL location.
Industrial Electronic Devices, Inc. — On December 3, 2014, the Company acquired certain assets of Industrial Electronic Devices, Inc. ("IED"), located in Flemington, NJ, for $3,292. The acquired business, which is part of the Company's ECP segment, designs and manufactures a full line of rugged displays for the Industrial and Marine markets. IED's catalog spans over 600 standard, semi-custom and custom configurations, incorporating some of the most advanced flat panel displays and touch screen technology available. These product lines have been consolidated into the Aydin Displays facility, located in Birdsboro, PA.
Electronic Manufacturing Technology, LLC. — On July 9, 2014, the Company acquired Electronic Manufacturing Technology, LLC. (“eMT”), located in Irvine, CA, for $22,069, which included $1,505 of acquired cash. The acquired business, which is part of the Company's MDS segment, is engaged in the contract services business of manufacturing electromechanical controls and electronic assemblies. Their customer profile includes international Fortune 1000 manufacturers of highly reliable industrial excimer laser products, laser eye surgery sub-assemblies, target simulators for space and aviation systems, power modules for computerized tomography products, test systems for commercial aerospace OEMs and toll road antennas and control boxes.
Included in the Company’s Consolidated Statements of Income for fiscal year 2015 are net sales of $23,503 and income before income taxes of $2,452, since the July 9, 2014 acquisition of eMT.

F-16

Table of Contents

Fiscal Year 2014
The following table represents the allocation of the total consideration to assets acquired and liabilities assumed in the 2014 acquisitions based on Sparton’s estimate of their respective fair values at the acquisition date:
 
Aubrey
 
Beckwood
 
Aydin
Total purchase consideration:
 
 
 
 
 
Cash
$
5,300

 
$
15,300

 
$
15,000

Cash consideration paid for excess cash
573

 

 

Working capital adjustment
(252
)
 
46

 
502

Total purchase consideration
$
5,621

 
$
15,346

 
$
15,502

Assets acquired and liabilities assumed:
 
 
 
 
 
Cash
$
1,056

 
$

 
$

Accounts receivable
680

 
1,157

 
2,279

Inventories
184

 
2,075

 
6,601

Deferred income taxes
4

 
108

 

Other current assets
22

 
122

 
895

Property, plant and equipment
221

 
83

 
582

Customer relationships

 
10,000

 
1,500

Non-compete agreements
140

 
280

 

Tradenames and trademarks

 

 
180

Unpatented technology

 

 
650

Goodwill
4,510

 
6,731

 
2,181

Deferred income taxes - non-current
290

 
(3,761
)
 

Other long-term assets

 
8

 
2,292

Accounts payable
(173
)
 
(866
)
 
(1,215
)
Other current liabilities
(1,313
)
 
(591
)
 
(443
)
Total assets acquired and liabilities assumed
$
5,621

 
$
15,346

 
$
15,502

Aubrey Group, Inc. — On March 17, 2014, the Company acquired Aubrey Group, Inc. ("Aubrey”), located in Irvine, CA, for $5,048. The acquired business, a design and manufacturing company, which is part of the MDS segment, develops new products for OEMs in the Medical and Biotechnological markets. Inventors, entrepreneurs and industry leading OEMs utilize Aubrey's design and engineering teams to develop innovative solutions in a timely manner, delivering its clients' new products into the marketplace faster and more cost effectively.
Beckwood Services, Inc. — On December 11, 2013, the Company acquired Beckwood Services, Inc. ("Beckwood”), located in Plaistow, N.H., for $15,346. The acquired business, which is part of the Company's MDS segment, develops electronic or electro-mechanical controls and electronic assemblies. Their customer profile includes international Fortune 1000 manufacturers of industrial control systems, analytical instruments, measuring and detecting equipment and military, defense and Homeland Security equipment.
Aydin Displays, Inc. — On August 30, 2013, the Company acquired certain assets and liabilities of Aydin Displays, Inc. ("Aydin Displays" or “Aydin”), located in Birdsboro, PA, for $15,502. The acquired business, which is part of the Company's ECP segment, develops enhanced flat panel display and touch-screen solutions with application-critical performance criteria including ruggedization, high resolution, color accuracy, response/refresh times, sunlight readability and other criteria such as magnetic interference and emanations security for the Military & Aerospace and Civil Marine markets. These products are currently specified in the U.S. Navy P8A Poseidon ASW aircraft behind-the-cockpit control center, the command and control centers of many U.S. Navy ships, Federal Aviation Administration air traffic control systems and cockpit command centers for various civil marine applications. The acquired business will continue to operate as Aydin Displays.
The following table summarizes, on a pro forma basis, the combined results of operations of the Company and the acquired businesses of Hunter, Stealth, KEP, RTEmd, Argotec, IED and eMT, as though the acquisitions had occurred as of July 1, 2013 and Aubrey, Beckwood and Aydin as though the acquisitions had occurred as of July 1, 2012. The pro forma amounts presented are not necessarily indicative of either the actual consolidated results had the acquisitions occurred as of July 1, 2013 and 2012, respectively, or of future consolidated operating results (unaudited):

F-17

Table of Contents

 
For fiscal years
 
2015
 
2014
Net sales
$
461,734

 
$
465,229

Income before income taxes
19,345

 
33,654

Net income
15,219

 
27,296

Net income per share — basic
1.54

 
2.70

Net income per share — diluted
1.54

 
2.69

Pro forma results presented above reflect: (1) incremental depreciation relating to fair value adjustments to property, plant and equipment; (2) amortization adjustments relating to fair value estimates of intangible assets; (3) elimination of interest expense relating to debt paid off in conjunction with the transaction; (4) incremental interest expense on assumed indebtedness and amortization of capitalized financing costs incurred in connection with the transactions; and (5) additional cost of goods sold relating to the capitalization of gross profit recognized in the year of acquisition as part of purchase accounting recognized for purposes of the pro forma as if it was recognized during the preceding year. Pro forma adjustments described above have been tax effected using Sparton's effective rate during the respective periods.
During fiscal 2016, the Company elected to adopt Accounting Standards Update No. 2015-16, Business Combinations (Topic 805) Simplifying the Accounting for Measurement-Period Adjustment. As a result, during fiscal year 2016, the Company recorded adjustments to the opening balance sheets of Hunter and RTEmd as follows:
Changes to goodwill:
 
 
Inventory
$
5,052

 
Accounts receivable
386

 
Property, plant and equipment
(974
)
 
Intangible assets - customer relationships
(700
)
 
Other assets and liabilities, net
(352
)
 
Non-cash adjustments
3,412

 
Adjustment to purchase consideration
(750
)
 
Total
$
2,662

For fiscal year 2016, the Company recorded depreciation expense of $362 in cost of goods sold and amortization of intangible assets of $26 that would have otherwise been recorded in prior periods.
Certain of the acquisitions included escrow accounts based on final working capital adjustments and other performance criteria. During fiscal year 2016, the Company received $750 in adjustments to the purchase price under the terms of an acquisition agreement, as reflected in the table above.
During fiscal year 2016, the Company recorded an adjustment to Goodwill of $428 which reduced certain tax liabilities related to the Company’s purchase of Hunter.
(4) Inventories and Cost of Contracts in Progress, net
The following are the major classifications of inventory, net of interim billings:
 
July 3,
2016
 
June 30,
2015
Raw materials
$
40,914

 
$
60,668

Work in process
23,626

 
19,047

Finished goods
22,294

 
7,244

Total inventory and cost of contracts in progress, gross
86,834

 
86,959

Inventory to which the U.S. government has title due to interim billings
(8,963
)
 
(7,456
)
Total inventory and cost of contracts in progress, net
$
77,871

 
$
79,503

(5) Property, Plant and Equipment, net

F-18

Table of Contents

Property, plant and equipment, net consists of the following:
 
July 3,
2016
 
June 30,
2015
Land and land improvements
$
1,429

 
$
1,429

Buildings and building improvements
27,660

 
27,482

Machinery and equipment
43,134

 
36,923

Construction in progress
1,372

 
2,278

Total property, plant and equipment
73,595

 
68,112

Less accumulated depreciation
(40,275
)
 
(35,504
)
Property, plant and equipment, net
$
33,320

 
$
32,608

(6) Other Non-current Assets
Other non-current assets consist of the following:
 
July 3,
2016
 
June 30,
2015
Deferred engineering and design costs - non-current
$
2,263

 
$
2,089

Environmental remediation - indemnification asset
1,606

 
1,832

Favorable lease, net
256

 
374

Deferred financing fees, net
1,563

 
1,169

Investment in securities available for sale

 
847

Other
1,004

 
840

Total other non-current assets
$
6,692

 
$
7,151

Engineering and design costs on long-term contracts not otherwise immediately reimbursed are deferred and recognized ratably over related revenue streams. For fiscal years 2016 and 2015, respectively, deferred engineering and design costs totaled $3,263 and $3,238 of which $1,000 and $1,149 were reflected in prepaid expenses and other current assets.
See Note 11, Commitments and Contingencies, of the "Notes to Consolidated Financial Statements" in this Form 10-K for a discussion of the Company's environmental remediation - indemnification asset.
The Company acquired a favorable leasehold in relation to its acquisition of Aydin Displays. The favorable leasehold is being amortized on a straight-line basis over the five year life of the lease and related amortization is reflected primarily within cost of goods sold on the consolidated statement of operations.
Costs incurred in connection with the Company’s current Credit Facility of $2,047 were deferred and amortized to interest expense over the five year term of the facility on a straight-line basis. Amortization of $298, $631 and $119 for these loan costs, as well as the previous revolving-credit facility's loan costs, were recognized and reported as interest expense for fiscal years 2016, 2015 and 2014, respectively.
The investment in securities available for sale was sold during fiscal year 2016 at a loss of $129.

F-19

Table of Contents

(7) Goodwill and Other Intangible Assets

Changes in the carrying value of goodwill and ending composition of goodwill are as follows:
 
July 3, 2016
 
Manufacturing & Design Services
 
Engineered Components & Products
 
Total
Goodwill, beginning of period
$
61,512

 
$
12,663

 
$
74,175

Additions to goodwill
2,662

 

 
2,662

Impairment of goodwill
(64,174
)
 

 
(64,174
)
Goodwill, end of period
$

 
$
12,663

 
$
12,663

 
 
 
 
 
 
 
June 30, 2015
 
Manufacturing & Design Services
 
Engineered Components & Products
 
Total
Goodwill, beginning of period
$
26,008

 
$
2,181

 
$
28,189

Additions to goodwill
35,504

 
10,482

 
45,986

Goodwill, end of period
$
61,512

 
$
12,663

 
$
74,175

 
 
 
 
 
 
 
July 3, 2016
 
Manufacturing & Design Services
 
Engineered Components & Products
 
Total
Acquired goodwill
$
77,327

 
$
12,663

 
$
89,990

Accumulated impairment
(77,327
)
 

 
(77,327
)
Goodwill
$

 
$
12,663

 
$
12,663

 
 
 
 
 
 
 
June 30, 2015
 
Manufacturing & Design Services
 
Engineered Components & Products
 
Total
Acquired goodwill
$
74,665

 
$
12,663

 
$
87,328

Accumulated impairment
(13,153
)
 

 
(13,153
)
Goodwill
$
61,512

 
$
12,663

 
$
74,175


F-20

Table of Contents

The amortization periods, gross carrying amounts, accumulated amortization, accumulated impairments and net carrying values of intangible assets are as follows:
 
July 3, 2016
 
Original Amortization
Period
in Months
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Accumulated
Impairments
 
Net
Carrying
Value
Amortized intangible assets:
 
 
 
 
 
 
 
 
 
 
 
Non-compete agreements
24
-
60
 
$
4,229

 
$
(2,036
)
 
$

 
$
2,193

Customer relationships
84
-
180
 
57,295

 
(21,007
)
 
(3,663
)
 
32,625

Trademarks/tradenames
12
-
120
 
1,696

 
(314
)
 

 
1,382

Unpatented technology
 
 
84
 
1,341

 
(608
)
 

 
733

 
 
 
 
 
$
64,561

 
$
(23,965
)
 
$
(3,663
)
 
$
36,933

 
 
 
 
 
 
 
 
 
 
 
 
 
June 30, 2015
 
Original Amortization
Period
in Months
 
Gross
Carrying
Amount
 
Accumulated
Amortization
 
Accumulated
Impairments
 
Net
Carrying
Value
Amortized intangible assets:
 
 
 
 
 
 
 
 
 
 
 
Non-compete agreements
24
-
60
 
$
4,229

 
$
(1,100
)
 
$

 
$
3,129

Customer relationships
84
-
180
 
56,595

 
(12,806
)
 
(3,663
)
 
40,126

Trademarks/tradenames
12
-
120
 
1,696

 
(145
)
 

 
1,551

Unpatented technology
 
 
84
 
1,341

 
(322
)
 

 
1,019

 
 
 
 
 
$
63,861

 
$
(14,373
)
 
$
(3,663
)
 
$
45,825

The Company did not incur any significant costs to renew or alter the terms of its intangible assets during fiscal year 2016. Amortization expense for fiscal years 2016, 2015 and 2014 were $9,592, $6,591 and $3,422, respectively. Aggregate amortization expense relative to existing intangible assets for the periods shown is currently estimated to be as follows:
For fiscal years
 
2017
$
8,496

2018
7,334

2019
6,302

2020
4,774

2021
3,729

2022 and thereafter
6,298

Total
$
36,933

(8) Debt
The Company had $97,206 and $154,500 borrowed against its Credit Facility at July 3, 2016 and June 30, 2015, respectively, which is classified as long-term on the Company's Consolidated Balance Sheets.
On September 11, 2014, the Company replaced its previous credit facility with a new $200,000 revolving line-of-credit facility with a group of banks (the “Credit Facility”) to fund future acquisitions and to support the Company’s working capital needs and other general corporate purposes. The Company expensed the remaining $413 of deferred financing costs relating to the previous credit facility in the first quarter of fiscal year 2015. On April 13, 2015, the Company amended the Credit Facility to increase the size of the revolving line-of-credit facility by $75,000 to $275,000, reload uncommitted loans under the agreement and to make other sublimit and definitional changes. The Company has the right to request an increase of the facility in an amount of up to $100,000. The facility is secured by substantially all assets of the Company and its subsidiaries and expires on September 11, 2019.
On June 27, 2016, the Company entered into Amendment No. 3 (“Amendment 3”) to the Credit Facility. As a result of Amendment 3, the Company reduced the revolving credit facility from $275,000 to $175,000, reduced the optional increase in the Credit Facility from $100,000 to $50,000, increased the permitted total funded debt to EBITDA ratio through the fiscal quarter ending September 2017, and provided for certain restrictions on business acquisitions, dividends and stock repurchases. Payments of $692 related to Amendment 3 were recorded as deferred financing costs in other long-term assets.

F-21

Table of Contents

Outstanding borrowings under the Credit Facility will bear interest, at the Company’s option, at either LIBOR, fixed for interest periods of one, two, three or six month periods, plus 1.00% to 3.00%, or at the bank’s base rate, as defined, plus 0.00% to 2.00%, based upon the Company’s Total Funded Debt/EBITDA Ratio, as defined. The Company is also required to pay commitment fees on unused portions of the Credit Facility ranging from 0.20% to 0.50%, based on the Company’s Total Funded Debt/EBITDA Ratio, as defined. The Credit Facility includes representations, covenants and events of default that are customary for financing transactions of this nature. The effective interest rate on outstanding borrowings under the Credit Facility was 3.50% at July 3, 2016.

As a condition of the Credit Facility, the Company is subject to certain customary covenants, with which it was in compliance at July 3, 2016.
As of July 3, 2016, the Company had $76,939 available under its $175,000 credit facility, reflecting borrowings of $97,206 and certain letters of credit outstanding of $855. Additionally, the Company had available cash and cash equivalents of $132.
The Company entered into capital leases in the third quarter of fiscal year 2016 with a total value of $656. The outstanding balance at the end of fiscal year 2016 totaled $549.
(9) Income Taxes
(Loss) income before income taxes by country consists of the following amounts:
 
For fiscal years
 
2016
 
2015
 
2014
United States
$
(56,184
)
 
$
14,533

 
$
18,915

Vietnam
364

 
38

 
691

Canada
321

 
384

 
(4
)
 
$
(55,499
)
 
$
14,955

 
$
19,602

Income taxes consists of the following components:
 
For fiscal years
 
2016
 
2015
 
2014
Current:
 
 
 
 
 
United States
$
544

 
$
4,317

 
$
6,913

Vietnam
130

 
6

 
134

Canada

 
15

 

State and local
672

 
501

 
544

 
1,346

 
4,839

 
7,591

Deferred:
 
 
 
 
 
United States
(16,133
)
 
465

 
(852
)
Vietnam
(8
)
 

 
7

Canada
141

 
(1,055
)
 

State and local
(2,562
)
 
(283
)
 
(131
)
 
(18,562
)
 
(873
)
 
(976
)
 
$
(17,216
)
 
$
3,966

 
$
6,615


F-22

Table of Contents

The consolidated effective income tax rate differs from the statutory U.S. federal tax rate for the following reasons and by the following percentages: 
 
For fiscal years
 
2016
 
2015
 
2014
Statutory U.S. federal income tax rate
35.0
 %
 
35.0
 %
 
35.0
 %
Significant increases (reductions) resulting from:
 
 
 
 
 
Changes in valuation allowance

 
(7.5
)
 

Domestic production activities deduction
0.3

 
(2.7
)
 
(2.7
)
Goodwill impairment
(8.3
)
 

 

Foreign tax rate differences
0.2

 
(0.2
)
 
(0.7
)
State and local income taxes, net of federal benefit
2.7

 
2.7

 
2.3

Research and development tax credit
1.4

 

 

Audits
(0.3
)
 

 

Other

 
(0.8
)
 
(0.2
)
Effective income tax rate
31.0
 %
 
26.5
 %
 
33.7
 %
Significant components of deferred income tax assets and liabilities are as follows:
 
July 3,
2016
 
June 30,
2015
Deferred tax assets:
 
 
 
Goodwill
$
17,258

 
$
(5
)
Environmental remediation
1,953

 
2,254

Inventories
4,553

 
3,298

Employment and compensation accruals
1,595

 
1,341

Capital loss carryover
263

 
263

State tax carryovers
213

 
373

Canadian tax carryovers
933

 
1,164

Pension asset
450

 
148

Intangible assets
2,042

 

Other
1,866

 
2,463

Deferred tax assets
31,126

 
11,299

Less valuation allowance
(263
)
 
(393
)
Deferred tax assets, net
30,863

 
10,906

Deferred tax liabilities:
 
 
 
Property, plant and equipment
(2,935
)
 
(1,430
)
Intangible assets

 
(237
)
Other
(2,144
)
 
(2,326
)
Deferred tax liabilities
(5,079
)
 
(3,993
)
Net deferred tax assets
$
25,784

 
$
6,913

In preparing the Company's consolidated financial statements, management has assessed the likelihood that its deferred income tax assets will be realized from future taxable income. In evaluating the ability to recover its deferred income tax assets, management considers all available evidence, positive and negative, including the Company's operating results, ongoing tax planning and forecasts of future taxable income on a jurisdiction by jurisdiction basis. A valuation allowance is established if it is determined that it is more likely than not that some portion or all of the net deferred income tax assets will not be realized. Management exercises significant judgment in determining the Company's income tax expense, its deferred income tax assets and liabilities and its future taxable income for purposes of assessing its ability to utilize any future tax benefit from its deferred income tax assets.
Although management believes that its tax estimates are reasonable, the ultimate tax determination involves significant judgments that could become subject to audit by tax authorities in the ordinary course of business. As of each reporting date

F-23

Table of Contents

management considers new evidence, both positive and negative, that could impact management's view with regards to future realization of deferred tax assets.
The Company has deferred tax assets of $213 and $933 related to state net operating losses and Canadian net operating losses which will expire beginning in 2029 and 2019 respectively. For financial reporting purposes, valuation allowances related to capital loss carryovers and state income tax carryovers were $263 and $393 as of July 3, 2016 and June 30, 2015, with expiration beginning in 2017 and 2029, respectively.
Included in the balance of unrecognized tax benefits as of July 3, 2016 are $71 of tax benefits that, if recognized, would affect the effective tax rate. There are no unrecognized tax benefits as of June 30, 2015 that, if recognized, would result in an adjustment to other tax accounts, primarily deferred taxes.
The Company recognizes interest accrued related to unrecognized tax benefits and penalties as income tax expense. Related to the unrecognized tax benefits noted above, the Company accrued penalties and interest of $0 during fiscal year 2016.
The Company's income tax returns are subject to audit by federal, state and local governments. These returns could be subject to material adjustments or differing interpretations of the tax laws. Fiscal years 2012 through 2016 remain open to examination by various tax authorities. The Company is currently undergoing an examination by the Internal Revenue Service, with any proposed adjustments not being anticipated to be material at this time. The Company is being audited by the Florida Department of Revenue and has accrued $270.
A portion of our operating income is earned outside of the United States. Earnings in Vietnam are deemed to be indefinitely reinvested in foreign jurisdictions while earnings in Canada are not deemed to be indefinitely reinvested. We currently do not intend or foresee a need to repatriate these funds from jurisdictions for which we assert indefinite reinvestment. We expect existing domestic cash and short-term investments and cash flows of operations to continue to be sufficient to fund our domestic operating activities and cash commitments for investing and financing activities, such as dividends, debt repayment, capital expenditures, for at least the next 12 months and thereafter for the foreseeable future.
(10) Employee Retirement Benefit Plans
Defined Benefit Pension Plan
As of July 3, 2016, 316 employees and retirees of the Company were covered by a defined benefit pension plan. Effective April 1, 2009, participation and the accrual of benefits in this pension plan were frozen, at which time all participants became fully vested and all remaining prior service costs were recognized. The components of net periodic pension expense were as follows: 
 
For fiscal years
 
2016
 
2015
 
2014
Interest cost
336

 
326

 
355

Expected return on plan assets
(524
)
 
(560
)
 
(524
)
Amortization of unrecognized net actuarial loss
153

 
81

 
128

Net periodic income cost
(35
)
 
(153
)
 
(41
)
Pro rata recognition of lump-sum settlements
333

 

 
85

Total periodic pension expense (income)
$
298

 
$
(153
)
 
$
44

Lump sum settlements in 2016 and 2014 were higher than certain statutory thresholds, thereby requiring portions of those settlements to be recognized in expense for those years.
The weighted average assumptions used to determine benefit obligations and net periodic benefit cost were as follows:
 
Benefit Obligation
 
Benefit Cost
 
2016
 
2015
 
2014
 
2016
 
2015
 
2014
Discount rate
3.70
%
 
4.45
%
 
4.35
%
 
4.45
%
 
4.35
%
 
4.75
%
Rate of compensation increase
N/A

 
N/A

 
N/A

 

 

 

Expected long-term rate on plan assets
N/A

 
N/A

 
N/A

 
7.50
%
 
7.50
%
 
7.50
%
The Company determines its assumption for the discount rate using market information as of the measurement date such as the Citigroup Pension Liability Index and Composite Corporate Bond Rates. The rate of compensation increase for calculation of the benefit obligation does not apply due to the freezing of the plan as of April 1, 2009. The expected long-term

F-24

Table of Contents

rate of return for plan assets is based on the Company’s expectation of future experience for trust asset returns and future market conditions, reflecting the plan trust’s current and expected future asset allocation. 
At July 3, 2016 and June 30, 2015, as a result of the fiscal year 2009 plan curtailment, the accumulated benefit obligation is equal to the projected benefit obligation. The following tables summarize the changes in benefit obligations, plan assets and funded status of the plan:
 
July 3,
2016
 
June 30,
2015
Change in prepaid benefit cost:
 
 
 
Prepaid benefit cost at beginning of fiscal year
$
1,711

 
$
1,643

Net periodic benefit (cost) income for fiscal year
(298
)
 
68

Employer contributions to plan

 

Prepaid benefit cost at end of fiscal year
$
1,413

 
$
1,711

Change in projected benefit obligation:
 
 
 
Projected benefit obligation at beginning of fiscal year
$
8,350

 
$
8,107

Interest cost
336

 
326

Actuarial experience and changes in assumptions
554

 
549

Benefits paid
(360
)
 
(632
)
Settlements
(977
)
 

Projected benefit obligation at end of fiscal year
$
7,903

 
$
8,350

Change in plan assets:
 
 
 
Fair value of plan assets at beginning of fiscal year
$
7,926

 
$
8,151

Actual return on plan assets
38

 
407

Benefits paid
(360
)
 
(632
)
Settlements
(977
)
 
$

Fair value of plan assets at end of fiscal year
$
6,627

 
$
7,926

Amounts recognized in the Consolidated Balance Sheets:
 
 
 
Pension liability — non-current portion
(1,276
)
 
(424
)
Funded status — total balance sheet liability
$
(1,276
)
 
$
(424
)
Plan participants receive retiree benefits from the plan through regular annuity payments (benefits paid) or through one-time, lump-sum distributions (settlements).
The Company’s policy is to fund the plan based upon legal requirements and tax regulations. For fiscal year 2016 and 2015, no cash contributions were required or made to the plan. Based upon current actuarial calculations and assumptions, no cash contributions are anticipated for fiscal year 2017. Anticipated contributions, if any, are reflected as a current portion of the pension liability. During the fiscal year 2014, $59 was contributed to the pension plan.
Pension related amounts recognized in other comprehensive income (loss), excluding tax effects were as follows:
 
For fiscal years
 
2016
 
2015
 
2014
Amortization of unrecognized net actuarial loss
$
153

 
$
81

 
$
128

Pro rata recognition of lump-sum settlements
333

 

 
85

Net actuarial (loss) gain
(1,040
)
 
(702
)
 
234

Total recognized in other comprehensive income (loss)
$
(554
)
 
$
(621
)
 
$
447


F-25

Table of Contents

The amounts in accumulated other comprehensive loss on the consolidated balance sheets, excluding tax effects, that have not yet been recognized as components of net periodic benefit cost were as follows:
 
July 3,
2016
 
June 30,
2015
Accumulated other comprehensive loss:
 
 
 
Net actuarial loss
$
2,689

 
$
2,134

Total
$
2,689

 
$
2,134

The estimated amount that will be amortized from accumulated other comprehensive loss, pre-tax, into net periodic pension cost in fiscal year 2017 is expected to total $208, consisting of amortization of unrecognized actuarial loss as well as lump sum settlement charges.
Expected benefit payments for the defined benefit pension plan for the next ten fiscal years are as follows:
For fiscal years
 
2017
$
745

2018
664

2019
585

2020
587

2021
539

2022 – 2026
2,406

Total
$
5,526

The Company’s investment policy related to pension plan assets is based on a review of the actuarial and funding characteristics of the plan. Capital market risk and return opportunities are also considered. The investment policy’s primary objective is to achieve a long-term rate of return consistent with the actuarially determined requirements of the plan, as well as maintaining an asset level sufficient to meet the plan’s benefit obligations. A target allocation range between asset categories has been established to enable flexibility in investment, allowing for a better alignment between the long-term nature of pension plan liabilities, invested assets and current and anticipated market returns on those assets.
Below is a summary of pension plan asset allocations by asset category:
 
Weighted average allocation
for fiscal years
 
Target
 
2016
 
2015
Equity securities
40%-70%
 
59
%
 
60
%
Fixed income (debt) securities
30%-60%
 
38
%
 
37
%
Cash and cash equivalents
0%-10%
 
3
%
 
3
%
 
 
 
100
%
 
100
%

F-26

Table of Contents

The fair value of all the defined benefit pension plan assets is based on quoted prices in active markets for identical assets which are considered Level 1 inputs within the fair value hierarchy described in Note 2, Summary of Significant Accounting Policies, of the "Notes to Consolidated Financial Statements" in this form 10-K. The total estimated fair value of plan assets by asset class were as follows:
 
July 3,
2016
 
June 30,
2015
Asset Class:
 
 
 
Equity securities:
 
 
 
Directly held corporate stock — Large Cap
$
2,408

 
$
2,394

Registered investment companies — Large Cap
1,139

 
1,079

Registered investment companies — Mid-Cap Growth

 
287

Registered investment companies — Small-Cap
151

 
359

Registered investment companies — International
205

 
646

Fixed income (debt) securities:
 
 
 
Registered investment companies — Intermediate Bond
2,520

 
2,896

Cash and cash equivalents
204

 
265

Total assets measured at fair value
$
6,627

 
$
7,926

  
During the fourth quarter of fiscal year 2016, the Company adopted Accounting Standards Update No. 2015-04 (“ASU 2015-04”), Practical Expedient for the Measurement Date of an Employer’s Defined Benefit Obligation and Plan Assets. As a result, for pension reporting as of July 3, 2016, the Company was able to calculate the pension plan assets and obligations using information as of June 30, 2016 without the additional expense of adjusting the June 30, 2016 information for activity that occurred between June 30, 2016 and July 3, 2016.
Defined Contribution Plans
Substantially all of the Company’s U.S. employees are eligible to participate in the Company’s 401(k) defined contribution plan. The plan allows employees to contribute up to 100% of their eligible compensation up to a maximum amount allowed by law and provides that the Company may, at its discretion, make matching contributions, profit sharing contributions or qualified non-elective contributions. During each of the fiscal years 2016, 2015 and 2014, the Company matched 50% of participants’ contributions up to 6% of their eligible compensation.
Under the plan, at the election of the participant, both employee and employer contributions may be invested in any of the available investment options, which include Sparton common stock. As of July 3, 2016, approximately 103,000 shares of Sparton common stock were held in the 401(k) plan. Amounts expensed related to the Company’s matching contributions and administrative expenses for the plan were $1,475, $1,233 and $1,106 for fiscal years 2016, 2015 and 2014, respectively.
(11) Commitments and Contingencies
Operating Leases — The Company is obligated under operating lease agreements for certain manufacturing and administrative facilities and a portion of its production machinery and data processing equipment. Such leases, some of which are non-cancelable and in many cases include purchase or renewal options, expire at various dates and typically provide for monthly payments over a fixed term in equal amounts. Some of these leases provide for escalating minimum monthly base rental payments. Generally, the Company is responsible for maintenance, insurance and property taxes relating to these leased assets. At July 3, 2016, the future minimum annual lease payments under these agreements are as follows:
For fiscal years
 
2017
$
2,529

2018
2,041

2019
1,485

2020
1,340

2021
744

Thereafter
1,638

Total
$
9,777


F-27

Table of Contents

Rent expense was $3,573, $2,480 and $1,520 for fiscal years 2016, 2015 and 2014, respectively. Included in rent expense for fiscal years 2016, 2015 and 2014 was $250, $493 and $315, respectively, of contingent rent expense primarily relating to the Company’s corporate headquarters in Schaumburg, Illinois and its Frederick, Colorado facility. During the third quarter of fiscal year 2016, the Company entered into sublease agreements totaling $1.0 million related to its Lawrenceville, GA manufacturing facility and its Irvine, CA design center, the largest of which extends through May of 2018.
Environmental Remediation — Environmental Remediation - Sparton has been involved with ongoing environmental remediation since the early 1980’s related to one of its former manufacturing facilities, located in Albuquerque, New Mexico (“Coors Road”). Although the Company entered into a long-term lease of the Coors Road property that was accounted for as a sale of property during fiscal year 2010, it remains responsible for the remediation obligations related to its past operation of this facility. During the fourth quarter of each fiscal year, Sparton performs a review of its remediation plan, which includes remediation methods currently in use, desired outcomes, progress to date, anticipated progress and estimated costs to complete the remediation plan by fiscal year 2030, following the terms of a March 2000 Consent Decree. The Company’s minimum cost estimate is based upon existing technology and excludes certain legal costs, which are expensed as incurred. The Company’s estimate includes equipment and operating and maintenance costs for onsite and offsite pump and treat containment systems, as well as continued onsite and offsite monitoring. It also includes periodic reporting requirements. The reviews performed in the fourth quarters of fiscal years 2016 and 2015 did not result in changes to the related liability. During the 2014 review, the Company found: additional concentrations of contaminants on-site that required clean-up actions previously not included within the remediation plan; progress to date on the removal of certain other on-site contaminants was taking place slower than previously anticipated; and that certain efficiencies regarding periodic reporting were not being realized as had been previously anticipated. The discovery of additional on-site contaminants, slower than expected removal rates of other on-site contaminants and continued high periodic reporting costs added significant additional costs to the remediation project that are expected to continue for a number of years. As a result, the remaining estimated minimum future undiscounted costs of this financial liability increased to $8,228 at June 30, 2014, thereby requiring a $4,238 non-cash charge against operations in the fourth quarter of fiscal year 2014. As of July 3, 2016 and June 30, 2015, Sparton has accrued $6,701 and $7,792, respectively, as its estimate of the remaining minimum future undiscounted financial liability with respect to this matter, of which $584 and $675, respectively, are classified as a current liability and included on the balance sheet in other accrued expenses.
In fiscal year 2003, Sparton reached an agreement with the United States Department of Energy (“DOE”) and others to recover certain remediation costs. Under the settlement terms, Sparton received cash and obtained some degree of risk protection as the DOE agreed to reimburse Sparton for 37.5% of certain future environmental expenses in excess of $8,400 incurred from the date of settlement, of which $6,548 has been expended as of July 3, 2016 toward the $8,400 threshold. It is expected that the DOE reimbursements will commence in the years after fiscal year 2019. At July 3, 2016 and June 30, 2015, the Company recognized $1,606 and $1,832 in long-term assets in relation to these expected reimbursements and is considered collectible. The DOE receivables of $1,606 at July 3, 2016 and $1,832 at June 30, 2015 are included in other non-current assets on the balance sheet. Uncertainties associated with environmental remediation contingencies are pervasive and often result in wide ranges of reasonably possible outcomes. Estimates developed in the early stages of remediation can vary significantly. Normally a finite estimate of cost does not become fixed and determinable at a specific point in time. Rather, the costs associated with environmental remediation become estimable over a continuum of events and activities that help to frame and define a liability. Factors which cause uncertainties for the Company include, but are not limited to, the effectiveness of the current work plans in achieving targeted results and proposals of regulatory agencies for desired methods and outcomes. It is possible that cash flows and results of operations could be materially affected by the impact of changes associated with the ultimate resolution of this contingency. At July 3, 2016, the Company estimates that it is reasonably possible, but not probable, that future environmental remediation costs associated with the Company’s past operations at the Coors Road property, in excess of amounts already recorded, could be up to $2,690 before income taxes over the next fourteen years, with this amount expected to be offset by related reimbursement from the DOE for a net amount of $1,009.
The Company and its subsidiaries are also involved in certain existing compliance issues with the EPA and various state agencies, including being named as a potentially responsible party at several sites. Potentially responsible parties ("PRPs") can be held jointly and severally liable for the clean-up costs at any specific site. The Company’s past experience, however, has indicated that when it has contributed relatively small amounts of materials or waste to a specific site relative to other PRPs, its ultimate share of any clean-up costs has been minor. Based upon available information, the Company believes it has contributed only small amounts to those sites in which it is currently viewed as a PRP and that reasonably possible losses related to these compliance issues are immaterial.
Litigation — On September 24, 2013, L-3 Communications Corporation, doing business as L-3 Linkabit ("L-3"), filed a complaint in the United States District Court for the Middle District of Florida, Orlando Division, against Sparton Corporation and Sparton Electronics. On August 24, 2015, Sparton and L-3 signed a mutual accord resolving the dispute. The agreement required Sparton to pay L-3 $2,500, which the Company paid as per the agreement on October 1, 2015, in consideration for dismissal of the litigation. Neither party admitted to any mistakes, damage or fault.

F-28

Table of Contents

In addition to the foregoing, from time to time, the Company is involved in various legal proceedings relating to claims arising in the ordinary course of business. The Company is not currently a party to any other such legal proceedings, the adverse outcome of which, individually or in the aggregate, is expected to have a material adverse effect on our business, financial condition or results of operations.
U.S. Government Audits — Federal government agencies, including the Defense Contract Audit Agency and the Defense Contract Management Agency, routinely audit and evaluate government contracts and government contractors’ administrative processes and systems. These agencies review the Company’s performance on contracts, pricing practices, cost structure, financial capability and compliance with applicable laws, regulations and standards. They also review the adequacy of the Company’s internal control systems and policies, including the Company’s purchasing, accounting, estimating, compensation and management information processes and systems. The Company works closely with these agencies to ensure compliance. The Company is not currently aware of any issues of noncompliance that would have a material impact on the Company’s financial position or results of operations.
(12) Stock-Based Compensation
The Company has a long-term incentive plan. The Sparton Corporation 2010 Long-Term Incentive Plan (the “2010 Plan”) was approved by the Company’s shareholders on October 28, 2009. Under the 2010 Plan, the Company may grant to employees, officers and directors of the Company or its subsidiaries incentive and non-qualified stock options, stock appreciation rights, restricted stock or restricted stock units, performance awards and other stock-based awards, including grants of shares. Restricted stock awards granted to date to employees under the 2010 Plan vest annually over four years, subject to achievement of certain financial performance metrics in addition to the service requirements. Unrestricted stock awards granted to date under the 2010 Plan represent annual stock grants to directors as a component of their overall compensation. The 2010 Plan has a term of ten years. The total number of shares that may be awarded under the 2010 Plan is 1,000,000 shares of common stock, of which amount, 546,395 shares remain available for awards as of July 3, 2016.
The following table shows stock-based compensation expense (credit) by type of share-based award included in the consolidated statements of operations:
 
For fiscal years
 
2016
 
2015
 
2014
Fair value expense of stock option awards
$
286

 
$
352

 
$

Restricted stock units
273

 
518

 

Restricted stock
(270
)
 
1,015

 
1,662

Total stock-based compensation
$
289

 
$
1,885

 
$
1,662

Restricted stock-based compensation reflects a reduction in expense in fiscal year 2016 as a result of the separation of certain executives from the Company.
The following table shows the total remaining unrecognized compensation cost related to restricted stock grants, restricted stock units grants and the fair value expense of stock option awards, as well as the weighted average remaining required service period over which such costs will be recognized as of July 3, 2016:
 
Total Remaining Unrecognized Compensation Cost
 
Weighted Average
Remaining Required
Service Period (in years)
Fair value expense of stock option awards
$
404

 
1.97
Restricted stock units
925

 
1.90
Restricted stock
94

 
1.17
 
$
1,423

 
1.89
During fiscal year 2016, the Company awarded an aggregate of 129,800 stock options to certain members of management with a weighted average exercise price of $23.02. The fair value of each stock option is estimated at the grant date using the Black-Scholes option pricing method. The table below outlines the weighted average assumptions used for the options granted

F-29

Table of Contents

during fiscal year 2016:
 
Weighted Average
Risk free interest rate
1.79
%
Volatility
34.00
%
Dividend yield

Expected life in years
6.25

Fair value
$8.45
The risk-free interest rate was determined using the then implied yield currently available for zero-coupon U.S. government issues with a remaining term equal to the expected life of the stock options. The expected volatility assumption used in the Black-Scholes option pricing models was based on the historical volatility of the Company’s common stock. The Company does not currently intend to pay cash dividends and thus has assumed a 0% dividend yield. The Company estimates the expected life for stock options based on expected future exercise patterns.
Stock Options
The following is a summary of activity for fiscal years 2016 and 2015 related to stock options granted under the Company’s 2010 plan:
 
Number of
Options
 
Weighted-Average
Exercise Price
Options outstanding as of June 30, 2014
38,543

 
$
8.57

Granted
123,684

 
26.58

Exercised
(19,247
)
 
8.57

Forfeited
(35,396
)
 
16.89

Options outstanding as of June 30, 2015
107,584

 
26.54

Granted
129,800

 
23.02

Vested
(25,650
)
 
26.64

Forfeited
(110,137
)
 
24.68

Options outstanding as of July 3, 2016
101,597

 
24.11

The stock options outstanding at July 3, 2016 have exercise prices ranging from $22.09 to $26.86, a weighted average exercise price of $24.11 and a weighted average remaining contractual life of 8.82 years. Of the outstanding stock options, 13,818 of these options were exercisable at a weighted average exercise price of $26.45 and a weighted average remaining contractual life of 8.45 years.
Restricted Stock Units
The following is a summary of activity for fiscal years 2016 and 2015 related to restricted stock units granted under the Company’s 2010 plan:
 
Shares
 
Weighted Average
Fair Value
Restricted stock units at June 30, 2014

 
$

Granted
75,045

 
26.70

Forfeited
(12,217
)
 
26.35

Restricted stock units at June 30, 2015
62,828

 
26.77

Granted
96,754

 
23.02

Forfeited
(80,308
)
 
24.74

Restricted stock units at July 3, 2016
79,274

 
24.25


F-30

Table of Contents

Restricted Stock
The following is a summary of activity for fiscal years 2016 and 2015 related to restricted stock granted under the Company’s 2010 plan:
 
Shares
 
Weighted Average
Fair Value
Restricted stock at June 30, 2014
316,997

 
$
12.38

Granted
26,793

 
25.86

Vested
(172,459
)
 
11.16

Forfeited
(39,032
)
 
19.56

Restricted stock at June 30, 2015
132,299

 
14.58

Vested
(27,346
)
 
7.88

Forfeited
(52,302
)
 
15.92

Restricted stock at July 3, 2016
52,651

 
16.72

The total fair value of restricted stock vested in fiscal years 2016, 2015 and 2014 was $630, $4,315 and $1,638, respectively.
(13) (Loss) Earnings Per Share Data
(Loss) earnings per share calculations, including weighted average number of shares of common stock outstanding used in calculating basic and diluted (loss) income per share are as follows:
 
For fiscal years
 
2016
 
2015
 
2014
Net (loss) income
$
(38,283
)
 
$
10,989

 
$
12,987

Less net (loss) income allocated to contingently issuable participating securities

 
(126
)
 

Net (loss) income available to common shareholders
$
(38,283
)
 
$
10,863

 
$
12,987

Weighted average shares outstanding – Basic
9,786,315

 
9,874,441

 
10,109,915

Dilutive effect of stock options

 
11,520

 
31,480

Weighted average shares outstanding – Diluted
9,786,315

 
9,885,961

 
10,141,395

Net (loss) income available to common shareholders per share:
 
 
 
 
 
Basic
$
(3.91
)
 
$
1.10

 
$
1.28

Diluted
$
(3.91
)
 
$
1.10

 
$
1.28

No adjustment for net loss available to common shareholders was required for fiscal year 2016 as 52,651 unvested restricted shares did not participate in the net loss for the year. For fiscal years 2015 and 2014, net income available to common shareholders was reduced by allocated earnings associated with unvested restricted shares of 132,299 and 316,997, respectively. There were 101,597 potential shares of common stock issuable upon exercise of stock options excluded from diluted income or loss per share computations for fiscal 2016, as they were anti-dilutive due to the net loss. No potential shares of common stock issuable upon exercise of stock options were excluded from diluted income per share computations for fiscal years 2015 and 2014, because none would have been anti-dilutive.
(14) Stock Repurchase Plan
On October 22, 2014, the Company’s Board of Directors approved a repurchase by the Company of up to $5,000 of shares of its common stock. The Company was authorized to purchase shares from time to time in open market, block and privately negotiated transactions. The stock repurchase program did not require the Company to repurchase any specific number of shares. Pursuant to this stock repurchase program, during fiscal year 2015, the Company purchased 181,278 shares of its common stock at an average price of $27.55 per share for approximately $5,000.
Shares purchased under the plan were canceled upon repurchase. As of July 3, 2016, all authorized funds under the stock repurchase program have been expended.

F-31

Table of Contents

(15) Restructuring Activities
During the second quarter of fiscal year 2016, the Company announced the closing of its Lawrenceville, GA manufacturing operations and the consolidation of the Irvine, CA design center into the Irvine, CA manufacturing operations to optimize the Company’s manufacturing and design facility footprint and realize synergies from the Company’s acquisitions. These restructuring activities are substantially complete as of the end of the fourth quarter of fiscal year 2016. Manufacturing activities have been transferred and the facilities are occupied by subtenants. The remaining reserve balances represent amounts for manufacturing transition at the new facilities, lease payments net of sublease income and severance payments.
 
Termination Benefits
 
Exit / Other Costs
 
Total
Restructuring reserve as of June 30, 2015
$

 
$

 
$

Provision
820

 
1,540

 
2,360

Payments
(408
)
 
(1,677
)
 
(2,085
)
Costs adjustments
(353
)
 
199

 
(154
)
Restructuring reserve as of July 3, 2016
$
59

 
$
62

 
$
121

(16) Business Segments
The Company is a provider of design, development and manufacturing services for complex electromechanical devices, as well as sophisticated engineered products complementary to the same electromechanical value stream. The Company serves the Medical & Biotechnology, Military & Aerospace and Industrial & Commercial markets through two reportable business segments; Manufacturing & Design Services and Engineered Components & Products. Reportable segments are defined as components of an enterprise for which separate financial information is available and is evaluated regularly by the chief operating decision maker ("CODM") in assessing performance and allocating resources. The Company's CODM is its Senior Vice President of Operations. During the first quarter of fiscal year 2015, the Company changed the way it internally reports, manages and the CODM evaluates the business and subsequently revised its reportable segments. The prior reportable segments of Medical and Complex Systems have been combined and are referred to as Manufacturing and Design Services ("MDS"). The Company's Medical customers (former Medical segment) and Military & Aerospace customers (former Complex Systems segment) have been combined as the economics of the underlying customer base, the nature of the products and services and the production process are significantly similar. As a result of this change in the reporting of segments, the CODM's assessment of the performance of medical customers separately from Military & Aerospace customers is no longer meaningful in assessing performance and allocating resources. In the MDS segment, the Company performs contract manufacturing and design services utilizing customer-owned intellectual property. The prior Defense and Security Systems reportable segment is now referred to as Engineered Components and Products ("ECP"). In the ECP segment, the Company performs manufacturing and design services using the Company's intellectual property. The Company has restated the prior periods to conform to the current year's presentation.
The Company uses an internal management reporting system, which provides important financial data to evaluate performance and allocate the Company's resources on a segment basis. Net sales are attributed to the segment in which the product is manufactured or service is performed. A segment's performance is evaluated based upon its operating income, contribution margin, gross margin and a variety of other factors. A segment's operating income includes its gross profit on sales less its selling and administrative expenses, including allocations of certain corporate operating expenses. Certain corporate operating expenses are allocated to segment results based on the nature of the service provided. Other corporate operating expenses, including certain administrative, financial and human resource activities as well as items such as interest expense, interest income, other income (expense) and income taxes are not allocated to operations and are excluded from segment profit. These costs are not allocated to the segments, as management excludes such costs when assessing the performance of the segments. Inter-segment transactions are generally accounted for at amounts that approximate arm's length transactions. Identifiable assets by segments are those assets that are used in each segment's operations. The accounting policies for each of the segments are the same as for the Company taken as a whole.
Manufacturing and Design Services segment operations are comprised of contract design, manufacturing and aftermarket repair and refurbishment of sophisticated printed circuit card assemblies, sub-assemblies, full product assemblies and cable/wire harnesses for customers seeking to bring their intellectual property to market. Additionally, Sparton is a developer of embedded software and software quality assurance services in connection with medical devices and diagnostic equipment. Customers include OEM and ET customers serving the Medical & Biotechnology, Military & Aerospace and Industrial & Commercial markets. In engineering and manufacturing for its customers, this segment adheres to very strict military and aerospace specifications, Food and Drug Administration (“FDA”) guidelines and approvals, in addition to product and process certifications.
Engineered Components and Products segment operations are comprised of design, development and production of proprietary products for both domestic and foreign defense as well as commercial needs. Sparton designs and manufactures ASW devices known as sonobuoys for the U.S. Navy and foreign governments that meet Department of State licensing requirements. This segment also performs an engineering development function for the United States military and prime defense contractors for advanced technologies ultimately leading to future defense products as well as replacements for existing products. The sonobuoy product line is built to stringent military specifications. These products are restricted by International Tariff and Arms Regulations (“ITAR”) and qualified by the U.S. Navy, which limits opportunities for competition. This segment is also a provider of rugged flat panel display systems for military panel PC workstations, air traffic control and industrial and commercial marine applications, as well as high performance industrial grade computer systems and peripherals. Rugged displays are manufactured for prime contractors, in some cases to specific military grade specifications. Additionally, this segment internally develops and markets commercial products for underwater acoustics and microelectromechanical (“MEMS”)-based inertial measurement.

F-32

Table of Contents

Operating results and certain other financial information about the Company’s two reportable segments were as follows:
 
Fiscal year 2016
 
Manufacturing & Design Services
 
Engineered Components & Products
 

Unallocated
 
Eliminations
 
Total
Net sales
$
282,076

 
$
154,559

 
$

 
$
(17,273
)
 
$
419,362

Gross profit
34,788

 
45,360

 

 

 
80,148

Selling and administrative expenses (incl. depreciation)
23,813

 
15,482

 
15,856

 

 
55,151

Internal research and development expenses

 
2,344

 

 

 
2,344

Restructuring charges
2,206

 

 

 

 
2,206

Impairment of goodwill
64,174

 

 

 

 
64,174

Depreciation and amortization
11,826

 
2,573

 
1,276

 

 
15,675

Operating (loss) income
(61,813
)
 
25,880

 
(15,856
)
 

 
(51,789
)
Capital expenditures
2,182

 
1,244

 
2,672

 

 
6,098

Total assets at July 3, 2016
$
167,277

 
$
69,627

 
$
9,094

 
$

 
$
245,998

 
 
 
 
 
 
 
 
 
 
 
Fiscal year 2015
 
Manufacturing & Design Services
 
Engineered Components & Products
 

Unallocated
 
Eliminations
 
Total
Net sales
$
263,940

 
$
136,315

 
$

 
$
(18,130
)
 
$
382,125

Gross profit
36,461

 
38,353

 

 

 
74,814

Selling and administrative expenses (incl. depreciation)
18,615

 
11,038

 
17,316

 

 
46,969

Internal research and development expenses

 
1,502

 

 

 
1,502

Depreciation and amortization
8,875

 
1,648

 
713

 

 
11,236

Operating income
9,535

 
25,033

 
(17,316
)
 

 
17,252

Capital expenditures
1,599

 
1,294

 
2,909

 

 
5,802

Total assets at June 30, 2015
$
238,777

 
$
64,880

 
$
33,894

 
$

 
337,551

 
 
 
 
 
 
 
 
 
 
 
Fiscal year 2014
 
Manufacturing & Design Services
 
Engineered Components & Products
 

Unallocated
 
Eliminations
 
Total
Net sales
$
246,129

 
$
109,134

 
$

 
$
(18,762
)
 
$
336,501

Gross profit
34,782

 
30,168

 

 

 
64,950

Selling and administrative expenses (incl. depreciation)
14,449

 
8,750

 
12,483

 

 
35,682

Internal research and development expenses

 
1,169

 

 

 
1,169

Restructuring charges
188

 

 

 

 
188

Depreciation and amortization
6,576

 
1,149

 
398

 

 
8,123

Operating income
17,029

 
19,943

 
(16,721
)
 

 
20,251

Capital expenditures
1,412

 
1,090

 
999

 

 
3,501


F-33

Table of Contents

(17) Business, Geographic and Sales Concentration
Sales to individual customers in excess of 10% of total net sales were as follows: 
 
For fiscal years
 
2016
 
2015
 
2014
U.S. Navy
22
%
 
25
%
 
19
%
Fenwal Blood Technologies
N/A

 
10
%
 
14
%
 
Sales to the United States Navy, including those made through the Company’s ERAPSCO joint venture, are included in the results of the Company’s ECP segment. Sales to Fenwal Blood Technologies are included in the results of the Company’s MDS segment.
Net sales were made to customers located in the following countries:
 
For fiscal years
 
2016
 
2015
 
2014
United States
$
369,127

 
$
345,643

 
$
296,328

Other foreign countries
50,235

 
36,482

 
40,173

Consolidated total
$
419,362

 
$
382,125

 
$
336,501

  
No other single country or currency zone accounted for 10% or more of export sales in the fiscal years 2016, 2015, or 2014.
ASW devices and related engineering contract services to the U.S. government and foreign countries contributed $119,291, (28%), $110,201, (29%) and $92,840, (28%), respectively, to total net sales for fiscal years 2016, 2015 and 2014.
The Company’s investment in property, plant and equipment, which are located in the United States, Canada and Vietnam, are summarized, net of accumulated depreciation, as follows:
 
July 3, 2016
 
June 30, 2015
United States
$
29,867

 
$
30,205

Canada
23

 

Vietnam
3,430

 
2,403

Consolidated total
$
33,320

 
$
32,608

(18) Quarterly Results of Operations (Unaudited):
 
Quarter
 
1st
 
2nd
 
3rd
 
4th
Fiscal year 2016
 
 
 
 
 
 
 
Net sales
$
106,691

 
$
103,529

 
$
102,175

 
$
106,967

Gross profit
21,138

 
18,521

 
19,067

 
21,422

Net income (loss)
2,394

 
268

 
1,136

 
(42,081
)
Income (loss) per share - Basic
0.24

 
0.03

 
0.12

 
(4.30
)
Income (loss) per share - Diluted
0.24

 
0.03

 
0.12

 
(4.30
)
Fiscal year 2015
 
 
 
 
 
 
 
Net sales
$
77,025

 
$
85,642

 
$
93,065

 
$
126,393

Gross profit
12,853

 
15,206

 
18,665

 
28,090

Net income
196

 
1,562

 
4,133

 
5,098

Income per share - Basic
0.02

 
0.16

 
0.42

 
0.52

Income per share - Diluted
0.02

 
0.16

 
0.42

 
0.51


F-34

Table of Contents

SCHEDULE II — VALUATION AND QUALIFYING ACCOUNTS
(In thousands)
Fiscal Years
 
 
Balance at
Beginning
of Period
 
Additions
Charged to
Costs and
Expenses
 
Allowance for Losses Acquired
 
Write-Offs/
Dispositions
 
Balance at
End of Period
2016
 
 
 
 
 
 
 
 
 
Allowance for losses on accounts receivable
$
173

 
$
583

 
$

 
$
(349
)
 
$
407

2015
 
 
 
 
 
 
 
 
 
Allowance for losses on accounts receivable
$
126

 
$
47

 
$
97

 
$
(97
)
 
$
173

2014
 
 
 
 
 
 
 
 
 
Allowance for losses on accounts receivable
$
61

 
$
87

 
$
57

 
$
(79
)
 
$
126



F-35

Table of Contents

INDEX TO EXHIBITS
Exhibit Number
Description
3.1
Second Amended Articles of Incorporation of the Registrant, incorporated herein by reference from the Registrant’s Proxy Statement on Form DEF 14A filed with the SEC on September 21, 2010.
 
 
3.2
Amended and Restated Code of Regulations of the Registrant, incorporated herein by reference from Exhibit 3.2 to the Registrant’s Current Report on Form 8-K filed with the SEC on May 5, 2015.
 
 
10.1
Amended and Restated Credit and Guaranty Agreement dated September 11, 2014, entered into between BMO Harris Bank N.A. and the Borrowers, incorporated by reference from Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed with the SEC on September 16, 2014.
 
 
10.2
Amendment No. 1 dated March 16, 2015 to the Amended and Restated Credit and Guaranty Agreement dated September 11, 2014, entered into between BMO Harris Bank N.A. and the Borrowers, incorporated by reference from Exhibit 10.1 to the Registrant’s Form 10-Q filed with SEC on May 5, 2015.
 
 
10.3
Amendment No. 2 dated April 13, 2015 to the Amended and Restated Credit and Guaranty Agreement dated September 11, 2014, entered into between BMO Harris Bank N.A. and the Borrowers, incorporated by reference from Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed with the SEC on April 17, 2015.
 
 
10.4
Amendment No. 3 dated June 27, 2016 to the Amended and Restated Credit and Guaranty Agreement dated September 11, 2014, entered into between BMO Harris Bank N.A. and the Borrowers, incorporated by reference from Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed with the SEC on June 29, 2016.
 
 
10.5†
Sparton Short-Term Incentive Plan, incorporated by reference from Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed with the SEC on July 1, 2009.
 
 
10.6†
First Amendment to Sparton Short-Term Incentive Plan, incorporated by reference from Exhibit 10.1 to the Registrant’s Form 8-K filed with the SEC on May 4, 2016.
 
 
10.7†
2010 Long-Term Stock Option Incentive Plan, incorporated by reference from Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed with the SEC on September 11, 2009.
 
 
10.8†
Amendment to the Sparton Corporation 2010 Long-Term Incentive Plan dated June 24, 2010, incorporated by reference from Exhibit 10.21 to the Registrant’s Annual Report on Form 10-K filed with the SEC on September 7, 2011.
 
 
10.9†
Second Amendment to the Sparton Corporation 2010 Long-Term Incentive Plan dated June 24, 2010, incorporated by reference from Exhibit 10.7 to the Registrant’s Annual Report on Form 10-K filed with the SEC on September 9, 2014.
 
 
10.10†
Form of Grant of Restricted Stock under Sparton Corporation’s Long-Term Incentive Plan, incorporated by reference from Exhibit 10.9 to the Registrant’s Annual Report on Form 10-K filed with the SEC on September 5, 2012.
 
 
10.11†
Executive Employment Agreement dated September 23, 2015 between the Company and Gordon Madlock, incorporated by reference from Exhibit 10.2 to the Registrant’s Current Report on Form 8-K filed with the SEC on September 24, 2015.
 
 
10.12†
Executive Employment Agreement dated September 23, 2015 between the Company and Steven Korwin, incorporated by reference from Exhibit 10.1 to the Registrant’s Report on Form 8-K filed with the SEC on September 24, 2015.
 
 
10.13†
Executive Employment Agreement effective as of September 8, 2015 between the
Company and Joseph G. McCormack, incorporated by reference from Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed with the SEC on September 8,
 
 
10.14†
Employment Agreement dated February 5, 2016 between the Company and Joseph J. Hartnett, incorporated by reference from Exhibit 10.5 to the Registrant’s Form 8-K filed with the SEC on February 8, 2016.
 
 
10.15†
Separation Agreement dated February 5, 2016 between the Registrant and Cary B. Wood, incorporated by reference from Exhibit 10.1 to the Registrant’s Form 8-K filed with the SEC on February 8, 2016.
 
 


Table of Contents

Exhibit Number
Description
10.16
Lease Extension and Amendment Agreement dated May 1, 2010 between Sparton Technology, Inc. and 9621 Coors, L.L.C., guaranteed by Albuquerque Motor Company, Inc., incorporated by reference from Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed with the SEC on May 6, 2010.
 
 
10.17
Option Agreement dated May 1, 2010 by and between Sparton Technology, Inc. and 9621 Coors, L.L.C., guaranteed by Albuquerque Motor Company, Inc., incorporated by reference from Exhibit 10.2 to the Registrant’s Current Report on Form 8-K filed with the SEC on May 6, 2010.
 
 
10.181
Solicitation, Offer and Award with an effective date of July 16, 2014 issued by the Naval Warfare Center to ERAPSCO, incorporated by reference from Exhibit 10.20 to the Registrant’s Annual Report on Form 10-K filed with the SEC on September 9, 2014.
 
 
10.191
Amendment of Solicitation/Modification of Contract with an effective date of July 28, 2014 issued by the Naval Warfare Center to ERAPSCO, incorporated by reference from Exhibit 10.21 to the Registrant’s Annual Report on Form 10-K filed with the SEC on September 9, 2014.
 
 
10.201
Amendment of Solicitation/Modification of Contract with an effective date of August 5, 2014 2014 issued by the Naval Warfare Center to ERAPSCO, incorporated by reference from Exhibit 10.24 to the Registrant’s Annual Report on Form 10-K filed with the SEC on September 9, 2014.
 
 
10.211
Amendment of Solicitation/Modification of Contract with an effective date of August 25, 2014 issued by the Naval Warfare Center to ERAPSCO, incorporated by reference from Exhibit 10.22 to the Registrant’s Annual Report on Form 10-K filed with the SEC on September 9, 2014.
 
 
10.221
Order for Supplies or Services with an effective date of July 17, 2014 issued by the Naval Warfare Center to ERAPSCO, incorporated by reference from Exhibit 10.23 to the Registrant’s Annual Report on Form 10-K filed with the SEC on September 9, 2014.
 
 
10.231
Subcontract with an effective date of July 17, 2014 between Sparton DeLeon Springs, LLC and ERAPSCO, incorporated by reference from Exhibit 10.25 to the Registrant’s Annual Report on Form 10-K filed with the SEC on September 9, 2014.
 
 
10.241
Modification of Subcontract with an effective date of April 10, 2015 between Sparton DeLeon
Springs, LLC and ERAPSCO, incorporated by reference from Exhibit 10.26 to the Registrant's annual Report on Form 10-K filed with the SEC on September 8, 20165.
 
 
10.25†
Form of Nonqualified Stock Option Agreement under Sparton Corporation’s Long-Term Incentive Plan, incorporated by reference from Exhibit 10.3 to the Registrant’s Form 10-Q filed with the SEC on November 4, 2014.
 
 
10.26†
Form of Grant of Restricted Stock Unit under Sparton Corporation’s Long Term Incentive Plan, incorporated by reference from Exhibit 10.4 to the Registrant’s Form 10-Q filed with the SEC on November 4, 2014.
 
 
10.27†
Form of Director and Officer Indemnification Agreement entered into as of May 1, 2014 with each of the Company’s directors and executive officers, incorporated herein by reference from Exhibit 10.1 to the Registrant’s Quarterly Report on Form 10-Q filed with the SEC on February 3, 2014.
 
 
10.28†
Adoption Agreement to Deferred Compensation Plan dated as of January 29, 2014, incorporated by reference from Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed with the SEC on February 4, 2014.
 
 
10.29†
First Amendment to the Sparton Corporation Deferred Compensation Plan, incorporated by reference from Exhibit 10.1 to the Registrant’s Current Report on Form 8-K filed with the SEC on July 3, 2014.
 
 
10.30†
Second Amendment to the Sparton Corporation Deferred Compensation Plan, incorporated by reference from Exhibit 10.2 to the Registrant’s Current Report on Form 8-K filed with the SEC on July 3, 2014.
 
 
10.31
Engine Capital Agreement dated May 4, 2016 among the Company, Engine Capital, L.P., Engine Jet Capital, L.P., Engine Capital Management, LLC, Engine Investments, LLC, Arnaud Ajdler, Norwood Capital Partners, LP, Norwood Investment Partners, LP, Norwood Investment Partners GP, LLC, Charles H. Hoeveler, Alan L. Bazaar and John A. Janitz, incorporated by reference from Exhibit 10.1 to the Registrant’s Form 8-K filed with the SEC on May 4,10, 2016.
 
 
10.32†
Form of Retention Bonus Agreement, incorporated by reference from Exhibit 10.1 to the Registrant’s Form 8-K filed with the SEC on July 19, 2016.


Table of Contents

 
 
Exhibit Number
Description
10.33*1
Modification of Subcontract with an effective date of September 23, 2015  between Sparton DeLeon Springs, LLC and ERAPSCO.
 
 
10.34*1
Modification of Subcontract with an effective date of April 11, 2016  between Sparton DeLeon Springs, LLC and ERAPSCO.
 
 
10.35†
Executive Employment Agreement dated as of September 23, 2015 between the Company and Joseph Schneider.
 
 
21.1*
Subsidiaries of Sparton Corporation.
 
 
23.1*
Consent of BDO USA, LLP.
 
 
31.1*
Interim Chief Executive Officer certification under Section 302 of the Sarbanes-Oxley Act of 2002.
 
 
31.2*
Chief Financial Officer certification under Section 302 of the Sarbanes-Oxley Act of 2002.
 
 
32.1*
Interim Chief Executive Officer and Chief Financial Officer certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
101.INS**
XBRL Instance Document.
 
 
101.SCH**
XBRL Taxonomy Extension Schema Document.
 
 
101.CAL**
XBRL Taxonomy Calculation Linkbase Document.
 
 
101.DEF**
XBRL Taxonomy Extension Definition Linkbase Document.
 
 
101.LAB**
XBRL Taxonomy Extension Label Linkbase Document.
 
 
101.PRE**
XBRL Taxonomy Extension Presentation Linkbase Document.
 
*    Filed herewith.
†    Indicates management contract or compensatory arrangement.
**    XBRL (Extensible Business Reporting Language) information is deemed not filed or part of a registration statement or
prospectus for purposes of sections 11 or 12 of the Securities Act of 1933, is deemed not filed for purposes of
Section 18 of the Securities Exchange Act of 1934, and otherwise is not subject to liability under these sections.
1    Confidential treatment has been requested with respect to the redacted portions of this exhibit.